完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
使用ESP-WROVER-KIT 直接采用eclipse导入IDF中的 ble_hid_device_demo工程
可以正常下载,但是debug就就卡在此处,不能进入debug界面,不知道原因,请问有专家解答么?而使用Blink示例工程,就是正常。 Code: Select all Open On-Chip Debugger v0.11.0-esp32-20211220 (2021-12-20-15:43) Licensed under GNU GPL v2 For bug reports, read http://openocd.org/doc/doxygen/bugs.html 3.3 Flashing E:/WS_eclipse/ble_hid_device_demo/build/partition_table/partition-table.bin at 0x8000 Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED Info : ftdi: if you experience problems at higher adapter clocks, try the command "ftdi_tdo_sample_edge falling" Info : clock speed 20000 kHz Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1) Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1) Info : esp32.cpu0: Debug controller was reset. Info : esp32.cpu0: Core was reset. Info : esp32.cpu1: Debug controller was reset. Info : esp32.cpu1: Core was reset. Info : starting gdb server for esp32.cpu0 on 3333 Info : Listening on port 3333 for gdb connections Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1) Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1) Info : esp32.cpu0: Target halted, PC=0x40147E52, debug_reason=00000000 Info : Set GDB target to 'esp32.cpu0' Info : esp32.cpu1: Target halted, PC=0x40147E52, debug_reason=00000000 Info : esp32.cpu0: Debug controller was reset. Info : esp32.cpu0: Core was reset. Info : esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000 Info : esp32.cpu0: Core was reset. Info : esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000 Info : esp32.cpu1: Debug controller was reset. Info : esp32.cpu1: Core was reset. Info : esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000 Info : esp32.cpu0: Target halted, PC=0x40092AEE, debug_reason=00000001 Info : Flash mapping 0: 0x10020 -> 0x3f400020, 113 KB Info : Flash mapping 1: 0x30020 -> 0x400d0020, 488 KB Info : esp32.cpu0: Target halted, PC=0x40092AEE, debug_reason=00000001 Info : Auto-detected flash bank 'esp32.cpu0.flash' size 4096 KB Info : Using flash bank 'esp32.cpu0.flash' size 4096 KB Info : esp32.cpu0: Target halted, PC=0x40092AEE, debug_reason=00000001 Info : Flash mapping 0: 0x10020 -> 0x3f400020, 113 KB Info : Flash mapping 1: 0x30020 -> 0x400d0020, 488 KB Info : esp32.cpu0: Target halted, PC=0x40092AEE, debug_reason=00000001 Info : Auto-detected flash bank 'esp32.cpu1.flash' size 4096 KB Info : Using flash bank 'esp32.cpu1.flash' size 4096 KB ** Programming Started ** Info : esp32.cpu0: Target halted, PC=0x40092AEE, debug_reason=00000001 Info : esp32.cpu0: Target halted, PC=0x40092AEE, debug_reason=00000001 Info : PROF: Data transferred in 31.001 ms @ 129.028 KB/s Info : esp32.cpu0: Target halted, PC=0x40092AEE, debug_reason=00000001 ** Programming Finished ** ** Verify Started ** Info : esp32.cpu0: Target halted, PC=0x40092AEE, debug_reason=00000001 ** Verified OK ** ** Flashing done for partition_table/partition-table.bin ** Flashing E:/WS_eclipse/ble_hid_device_demo/build/bootloader/bootloader.bin at 0x1000 Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1) Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1) Info : esp32.cpu0: Debug controller was reset. Info : esp32.cpu0: Core was reset. Info : esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000 Info : esp32.cpu0: Core was reset. Info : esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000 Info : esp32.cpu1: Debug controller was reset. Info : esp32.cpu1: Core was reset. Info : esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000 ** Programming Started ** Info : esp32.cpu0: Target halted, PC=0x40092AEE, debug_reason=00000001 Info : esp32.cpu0: Target halted, PC=0x40092AEE, debug_reason=00000001 Info : PROF: Data transferred in 97.083 ms @ 288.413 KB/s Info : esp32.cpu0: Target halted, PC=0x40092AEE, debug_reason=00000001 ** Programming Finished ** ** Verify Started ** Info : esp32.cpu0: Target halted, PC=0x40092AEE, debug_reason=00000001 ** Verified OK ** ** Flashing done for bootloader/bootloader.bin ** Flashing E:/WS_eclipse/ble_hid_device_demo/build/ble_hid_device_demo.bin at 0x10000 Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1) Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1) Info : esp32.cpu0: Debug controller was reset. Info : esp32.cpu0: Core was reset. Info : esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000 Info : esp32.cpu0: Core was reset. Info : esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000 Info : esp32.cpu1: Debug controller was reset. Info : esp32.cpu1: Core was reset. Info : esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000 ** Programming Started ** Info : esp32.cpu0: Target halted, PC=0x40092AEE, debug_reason=00000001 Info : esp32.cpu0: Target halted, PC=0x40092AEE, debug_reason=00000001 Info : PROF: Data transferred in 3037.52 ms @ 234.401 KB/s Info : esp32.cpu0: Target halted, PC=0x40092AEE, debug_reason=00000001 ** Programming Finished ** ** Verify Started ** Info : esp32.cpu0: Target halted, PC=0x40092AEE, debug_reason=00000001 ** Verified OK ** ** Flashing done for ble_hid_device_demo.bin ** ** Resetting Target ** Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1) Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1) Info : esp32.cpu0: Debug controller was reset. Info : esp32.cpu0: Core was reset. Info : esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000 Info : esp32.cpu0: Core was reset. Info : esp32.cpu1: Debug controller was reset. Info : esp32.cpu1: Core was reset. 0 Started by GNU MCU Eclipse Info : Listening on port 6666 for tcl connections Info : Listening on port 4444 for telnet connections Info : accepting 'gdb' connection on tcp/3333 Info : esp32.cpu0: Target halted, PC=0x40147E52, debug_reason=00000000 Info : esp32.cpu1: Target halted, PC=0x40147E52, debug_reason=00000000 Warn : No symbols for FreeRTOS! Info : esp32.cpu0: Target halted, PC=0x40092AEE, debug_reason=00000001 Info : Flash mapping 0: 0x10020 -> 0x3f400020, 113 KB Info : Flash mapping 1: 0x30020 -> 0x400d0020, 488 KB Info : Using flash bank 'esp32.cpu0.irom' size 492 KB |
|
相关推荐
|
|
只有小组成员才能发言,加入小组>>
441浏览 6评论
373浏览 5评论
有没有办法在不使用混杂模式的情况下实现Wifi驱动程序接收缓冲区访问中断呢?
353浏览 5评论
359浏览 4评论
336浏览 4评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-9-10 17:18 , Processed in 0.965352 second(s), Total 73, Slave 56 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191