ESP32-S2的ulp_adc例程无法烧录的原因？如何解决？

开发板:ESP32-S2-DevKitM-1 v1.0

开发环境:win10+espressif-ide(c语言）

我直接打开ulp_adc例程能编译成功，但无法烧录，烧录失败并出现下述信息。（其他例程可以正常烧录）

[1/388] Performing build step for 'ulp_main'

FAILED: esp-idf/main/ulp_main-prefix/src/ulp_main-stamp/ulp_main-build esp-idf/main/ulp_main/ulp_main.bin esp-idf/main/ulp_main/ulp_main.ld esp-idf/main/ulp_main/ulp_main.h esp-idf/main/ulp_main/ulp_main.map esp-idf/main/ulp_main/ulp_main.sym esp-idf/main/ulp_main/esp32.ulp.ld esp-idf/main/ulp_main/ulp_main F:/ESP_Workspace/ulp_adc/build/esp-idf/main/ulp_main-prefix/src/ulp_main-stamp/ulp_main-build F:/ESP_Workspace/ulp_adc/build/esp-idf/main/ulp_main/ulp_main.bin F:/ESP_Workspace/ulp_adc/build/esp-idf/main/ulp_main/ulp_main.ld F:/ESP_Workspace/ulp_adc/build/esp-idf/main/ulp_main/ulp_main.h F:/ESP_Workspace/ulp_adc/build/esp-idf/main/ulp_main/ulp_main.map F:/ESP_Workspace/ulp_adc/build/esp-idf/main/ulp_main/ulp_main.sym F:/ESP_Workspace/ulp_adc/build/esp-idf/main/ulp_main/esp32.ulp.ld F:/ESP_Workspace/ulp_adc/build/esp-idf/main/ulp_main/ulp_main

cmd.exe /C "cd /D F:ESP_Workspaceulp_adcbuildesp-idfmainulp_main && F:ESP-IDFEspressiftoolscmake3.23.1bincmake.exe --build F:/ESP_Workspace/ulp_adc/build/esp-idf/main/ulp_main --target build"

[1/4] Linking ASM executable ulp_main

FAILED: ulp_main

cmd.exe /C "cd . && F:ESP-IDFEspressiftoolsesp32s2ulp-elf2.28.51-esp-20191205esp32s2ulp-elf-binutilsbinesp32s2ulp-elf-ld.exe  -A elf32-esp32s2ulp -nostdlib CMakeFiles/ulp_main.dir/adc.ulp.S.obj -o ulp_main  -T"F:/ESP_Workspace/ulp_adc/build/esp-idf/main/ulp_main/ulp_fsm.ld"  -Map="F:/ESP_Workspace/ulp_adc/build/esp-idf/main/ulp_main/ulp_main.map" && cd ."

F:ESP-IDFEspressiftoolsesp32s2ulp-elf2.28.51-esp-20191205esp32s2ulp-elf-binutilsbinesp32s2ulp-elf-ld.exe: invalid length for memory region ram

ninja: build stopped: subcommand failed.

[2/388] Performing build step for 'bootloader'

[1/1] cmd.exe /C "cd /D F:ESP_Workspaceulp_adcbuildbootloaderesp-idfesptool_py && python F:/ESP-IDF/Espressif/frameworks/esp-idf-v4.4.2/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 F:/ESP_Workspace/ulp_adc/build/bootloader/bootloader.bin"

Bootloader binary size 0x4950 bytes. 0x26b0 bytes (35%) free.

[3/386] Generating x509_crt_bundle

ninja: build stopped: subcommand failed.

Executing action: flash

Running ninja in directory f:esp_workspaceulp_adcbuild

Executing "ninja flash"...

ninja failed with exit code 1



例程未更改，但无法下载



能麻烦工作人员帮忙看看吗？