[问答]

RK3288 Android7.1接USB摄像头后扬声器无声音的原因是什么？怎么解决？

问答对人有帮助，内容完整，我也想知道答案 0 RK3288 Android7.1接USB摄像头后扬声器无声音的原因是什么？怎么解决？ 0
2022-3-4 06:45:20　　评论淘帖0 邀请回答您可以邀请以下用户，快速回答问题 × liutiefu 该类别下有 26 个回答。邀请回答 tigerwang711 该类别下有 20 个回答。邀请回答 ze55me 该类别下有 20 个回答。邀请回答杀狼000 该类别下有 19 个回答。邀请回答 zhuzb0754 该类别下有 19 个回答。邀请回答冰箱洗衣机该类别下有 18 个回答。邀请回答 YYXIAO 该类别下有 18 个回答。邀请回答安德森大该类别下有 17 个回答。邀请回答 CDCNKA 该类别下有 17 个回答。邀请回答 jjll652 该类别下有 17 个回答。邀请回答河神大人该类别下有 17 个回答。邀请回答 mede1001 该类别下有 17 个回答。邀请回答 YOYOOO 该类别下有 16 个回答。邀请回答麻酱该类别下有 16 个回答。邀请回答世态薄凉该类别下有 16 个回答。邀请回答熊本熊该类别下有 16 个回答。邀请回答江左盟该类别下有 15 个回答。邀请回答 wang21cj 该类别下有 15 个回答。邀请回答 dfgsdf 该类别下有 15 个回答。邀请回答 szj0213 该类别下有 15 个回答。邀请回答举报王芳相关推荐 • 怎样去解决RK3288 Android6.0调试时出现几个USB摄像头打开预览时卡住的问题呢 1845 • 怎样去解决RK3288 Android7.1系统虚拟按键方向不对的问题呢 1176 • RK3288接双目摄像头怎么操作？ 1646 • rk3288直接连接USB接口摄像头可以打开，但是用排线就不行，什么原因？ 2028 • RK3288 Android是如何实现摄像头90度旋转的呢 2887 • 怎样去修改Android7.1 RK3288的屏幕物理分辨率呢 2522 • RK3288读取USB摄像头没有显示ttyUSB0怎么解决 2236 • RK3288 Android7.1软件开发指南分享，绝对实用 2476 • RK3288连接USB摄像头做测试经常掉 2957 • 如何将RK3288 Android7.1默认系统语言设置为英文？ 846 1个回答

答案对人有帮助，有参考价值 0 接入某些USB摄像头后, 扬声器没有声音 2017-01-01 21:19:24.770 228-287/? E/AudioHardwareTiny: pcm_open(PCM_CARD_HDMI) failed: 222 cannot open device '/dev/snd/pcmC0D1p': No such file or directory 原因 USB摄像头包含有MIC输入, 在启动初始化后, 会直接抢占card0, 而默认的声卡的初始化比这个慢, 导致card0中, 只有一个有效的输入, 而没有输出; 主要的原因还是, 在HAL中, 并没有对无效的输出作处理, 有的, 只有上面一个错误的LOG. 解决方案方案一修改USB上电顺序, 延迟初始化到主板声卡后方案二修改HAL, 在打开card0失败后, 尝试打开主板声卡, 可能是card1, card2… 参考: diff --git a/hardware/rockchip/audio/tinyalsa_hal/audio_hw.c b/hardware/rockchip/audio/tinyalsa_hal/audio_hw.c index 53069ab..266fcac 100755 --- a/hardware/rockchip/audio/tinyalsa_hal/audio_hw.c +++ b/hardware/rockchip/audio/tinyalsa_hal/audio_hw.c @@ -660,33 +660,54 @@ static int start_output_stream(struct stream_out out) } } + ALOGD("start_output_stream :666 out->device=%x", out->device); if (out->device & (AUDIO_DEVICE_OUT_SPEAKER \| AUDIO_DEVICE_OUT_WIRED_HEADSET \| AUDIO_DEVICE_OUT_WIRED_HEADPHONE \| AUDIO_DEVICE_OUT_ALL_SCO)) { + int card = PCM_CARD_HDMI; + bool success = true; / open & close hdmi card to mute hdmi audio / - out->pcm_device = 1; - out->pcm[PCM_CARD_HDMI] = pcm_open(PCM_CARD_HDMI, out->pcm_device, + out->pcm_device = 1; + ALOGD("start_output_stream pcm_open(%d, %d)", card, out->pcm_device); + out->pcm[0] = pcm_open(card, out->pcm_device, PCM_OUT \| PCM_MONOTONIC, &out->config); - if (out->pcm[PCM_CARD_HDMI] && - !pcm_is_ready(out->pcm[PCM_CARD_HDMI])) { - ALOGE("pcm_open(PCM_CARD_HDMI) failed: 222%s", - pcm_get_error(out->pcm[PCM_CARD_HDMI])); - pcm_close(out->pcm[PCM_CARD_HDMI]); - return -ENOMEM; + if (out->pcm[0] && + !pcm_is_ready(out->pcm[0])) { + ALOGE("pcm_open(PCM_CARD_HDMI) failed: 222 %s", + pcm_get_error(out->pcm[0])); + pcm_close(out->pcm[0]); + success = false; + //return -ENOMEM; } - if (out->pcm[PCM_CARD_HDMI]) - pcm_close(out->pcm[PCM_CARD_HDMI]); - out->pcm_device = 0; - out->pcm[PCM_CARD] = pcm_open(PCM_CARD, out->pcm_device, + + if(!success){ + //CARD 1 + card = PCM_CARD_BOARD; + out->pcm[0] = pcm_open(card, out->pcm_device, + PCM_OUT \| PCM_MONOTONIC, &out->config); + if (out->pcm[0] && + !pcm_is_ready(out->pcm[0])) { + ALOGE("pcm_open(%d) failed: 222 %s", + card, pcm_get_error(out->pcm[0])); + pcm_close(out->pcm[0]); + return -ENOMEM; + } + } + + if (out->pcm[0]) + pcm_close(out->pcm[0]); + + out->pcm_device = 0; + ALOGD("start_output_stream pcm_open(%d, %d) b", card, out->pcm_device); + out->pcm[0] = pcm_open(card, out->pcm_device, PCM_OUT \| PCM_MONOTONIC, &out->config); - if (out->pcm[PCM_CARD] && !pcm_is_ready(out->pcm[PCM_CARD])) { - ALOGE("pcm_open(PCM_CARD) failed: %s", - pcm_get_error(out->pcm[PCM_CARD])); - pcm_close(out->pcm[PCM_CARD]); - return -ENOMEM; + if (out->pcm[0] && !pcm_is_ready(out->pcm[0])) { + ALOGE("pcm_open(PCM_CARD) failed: %s", + pcm_get_error(out->pcm[0])); + pcm_close(out->pcm[0]); + return -ENOMEM; } - } if (out->device & AUDIO_DEVICE_OUT_SPDIF) { @@ -707,8 +728,10 @@ static int start_output_stream(struct stream_out out) adev->out_device \|= out->device; if (out->device & AUDIO_DEVICE_OUT_ALL_SCO) { + ALOGD("start_output_stream ALL_SCO"); start_bt_sco(adev); #ifdef BT_AP_SCO // HARD CODE FIXME + ALOGD("start_output_stream BT_AP_SCO"); out->pcm[PCM_BT] = pcm_open(PCM_BT, 0, PCM_OUT \| PCM_MONOTONIC, &pcm_config_ap_sco); ret = create_resampler(48000, @@ -1545,6 +1568,7 @@ static void set_data_slice(void in_data,struct stream_out out,size_t length) static ssize_t out_write(struct audio_stream_out stream, const void buffer, size_t bytes) { + ALOGD("out_write"); int ret = 0; struct stream_out out = (struct stream_out )stream; struct audio_device adev = out->dev; diff --git a/hardware/rockchip/audio/tinyalsa_hal/audio_hw.h b/hardware/rockchip/audio/tinyalsa_hal/audio_hw.h index aebcd0a..f579c10 100755 --- a/hardware/rockchip/audio/tinyalsa_hal/audio_hw.h +++ b/hardware/rockchip/audio/tinyalsa_hal/audio_hw.h @@ -83,6 +83,7 @@ int PCM_CARD_SPDIF = 1; #else int PCM_CARD = 0; int PCM_CARD_HDMI = 0; +int PCM_CARD_BOARD = 1; int PCM_CARD_SPDIF = 2; #endif int PCM_BT = 3; 状态信息 //声卡 rk3288:/ # ll proc/asound/ total 0 lrwxrwxrwx 1 root root 5 2017-01-02 00:52 AMCAP -> card0 dr-xr-xr-x 3 root root 0 2017-01-02 00:52 card0 dr-xr-xr-x 5 root root 0 2017-01-02 00:52 card1 -r--r--r-- 1 root root 0 2017-01-02 00:52 cards -r--r--r-- 1 root root 0 2017-01-02 00:52 devices -r--r--r-- 1 root root 0 2017-01-02 00:52 hwdep -r--r--r-- 1 root root 0 2017-01-02 00:52 pcm lrwxrwxrwx 1 root root 5 2017-01-02 00:52 rockchipes8316c -> card1 -r--r--r-- 1 root root 0 2017-01-02 00:52 timers -r--r--r-- 1 root root 0 2017-01-02 00:52 version //声卡信息, 0为USB摄像头 rk3288:/ # cat /proc/asound/cards 0 [AMCAP ]: USB-Audio - USB 2.0 AMCAP Sonix Technology Co., Ltd. USB 2.0 AMCAP at u-ff540000.u-1.2, high speed 1 [rockchipes8316c]: rockchip_es8316 - rockchip,es8316-codec rockchip,es8316-codec //声卡设备 rk3288:/ # cat /proc/asound/devices 2: [ 0] : control 3: [ 0- 0]: digital audio capture 4: [ 1] : control 5: [ 1- 0]: digital audio playback 6: [ 1- 0]: digital audio capture 7: [ 1- 1]: digital audio playback 33: : timer //设备节点 rk3288:/dev/snd # ll total 0 crw-rw---- 1 system audio 116, 2 2017-01-02 00:26 controlC0 crw-rw---- 1 system audio 116, 4 2017-01-02 00:26 controlC1 crw-rw---- 1 system audio 116, 3 2017-01-02 00:26 pcmC0D0c crw-rw---- 1 system audio 116, 6 2017-01-02 00:26 pcmC1D0c crw-rw---- 1 system audio 116, 5 2017-01-02 00:26 pcmC1D0p crw-rw---- 1 system audio 116, 7 2017-01-02 00:26 pcmC1D1p crw-rw---- 1 system audio 116, 33 2017-01-02 00:26 timer //输出PCM信息 rk3288:/ # tinypcminfo -D 0 Info for card 0, device 0: PCM out: cannot open device '/dev/snd/pcmC0D0p' Device does not exist. PCM in: Access: 0x000009 Format[0]: 0x000004 Format[1]: 00000000 Format Name: S16_LE Subformat: 0x000001 Rate: min=8000Hz max=48000Hz Channels: min=2 max=2 Sample bits: min=16 max=16 Period size: min=16 max=131072 Period count: min=2 max=1024 rk3288:/ # tinypcminfo -D 1 Info for card 1, device 0: PCM out: Access: 0x000009 Format[0]: 0x000044 Format[1]: 00000000 Format Name: S16_LE, S24_LE Subformat: 0x000001 Rate: min=8000Hz max=96000Hz Channels: min=2 max=2 Sample bits: min=16 max=32 Period size: min=32 max=65536 Period count: min=2 max=4096 PCM in: Access: 0x000009 Format[0]: 0x000044 Format[1]: 00000000 Format Name: S16_LE, S24_LE Subformat: 0x000001 Rate: min=8000Hz max=96000Hz Channels: min=2 max=2 Sample bits: min=16 max=32 Period size: min=32 max=65536 Period count: min=2 max=4096 相关源码 rk3288_n712$ ll hardware/rockchip/audio/tinyalsa_hal/ alsa_audio.h alsa_mixer.c alsa_route.c amix.c Android.mk asound.h audio_bitstream.c audio_bitstream.h audio_hw.c audio_hw.h audio_hw_hdmi.c audio_hw_hdmi.h audio_setting.c audio_setting.h codec_config/ voice_preprocess.c voice_preprocess.h \|-- hardware/rockchip/audio/tinyalsa_hal/audio_hw.c static int start_output_stream(struct stream_out out) { ALOGD("start_output_stream"); char value[PROPERTY_VALUE_MAX] = ""; struct audio_device adev = out->dev; int type; bool connect_hdmi = true; int ret = 0; ALOGD("%s",__FUNCTION__); if (out == adev->outputs[OUTPUT_HDMI_MULTI]) { force_non_hdmi_out_standby(adev); } else if (adev->outputs[OUTPUT_HDMI_MULTI] && !adev->outputs[OUTPUT_HDMI_MULTI]->standby) { out->disabled = true; return 0; } out->disabled = false; read_hdmi_audioinfo(); int device = getOutputDevice(); ALOGD("start_output_stream device=%x", device); ALOGD("start_output_stream out->device=%x", out->device); if (device == SPDIF_PASSTHROUGH_MODE) { out->device &= ~AUDIO_DEVICE_OUT_AUX_DIGITAL; out->device \|= AUDIO_DEVICE_OUT_SPDIF; } else if (device == HDMI_BITSTREAM_MODE) { out->device &= ~AUDIO_DEVICE_OUT_SPDIF; out->device \|= AUDIO_DEVICE_OUT_AUX_DIGITAL; } #ifdef BOX_HAL if (out->device & AUDIO_DEVICE_OUT_AUX_DIGITAL) { /BOX hdmi & codec use the same i2s,so only config the codec card/ out->device &= ~AUDIO_DEVICE_OUT_SPEAKER; } read_snd_card_info(); if (out->config.flag == HW_PARAMS_FLAG_LPCM){ if(hasSpdif() && ((out->device & AUDIO_DEVICE_OUT_SPDIF)==0)){ out->device \|= AUDIO_DEVICE_OUT_SPDIF; } } #ifdef RK3228 if (out->config.flag == HW_PARAMS_FLAG_LPCM) { if (out->device & AUDIO_DEVICE_OUT_AUX_DIGITAL) { out->device \|= AUDIO_DEVICE_OUT_SPEAKER; } } #endif out_dump(out, 0); #endif connect_hdmi = true; route_pcm_open(getRouteFromDevice(out->device)); if (out->device & AUDIO_DEVICE_OUT_AUX_DIGITAL) { if (connect_hdmi) { #ifdef BOX_HAL #ifdef USE_DRM int ret = 0; ret = mixer_mode_set(out); if (ret!=0) { ALOGE("mixer mode set error,ret=%d!",ret); } #endif #endif out->pcm_device = 1; out->pcm[PCM_CARD_HDMI] = pcm_open(PCM_CARD_HDMI, out->pcm_device, PCM_OUT \| PCM_MONOTONIC, &out->config); if (out->pcm[PCM_CARD_HDMI] && !pcm_is_ready(out->pcm[PCM_CARD_HDMI])) { ALOGE("pcm_open(PCM_CARD_HDMI) failed:111 %s", pcm_get_error(out->pcm[PCM_CARD_HDMI])); pcm_close(out->pcm[PCM_CARD_HDMI]); return -ENOMEM; } } else { ALOGD("The current HDMI is DVI mode"); out->device \|= AUDIO_DEVICE_OUT_SPEAKER; } } if (out->device & (AUDIO_DEVICE_OUT_SPEAKER \| AUDIO_DEVICE_OUT_WIRED_HEADSET \| AUDIO_DEVICE_OUT_WIRED_HEADPHONE \| AUDIO_DEVICE_OUT_ALL_SCO)) { / open & close hdmi card to mute hdmi audio / out->pcm_device = 1; out->pcm[PCM_CARD_HDMI] = pcm_open(PCM_CARD_HDMI, out->pcm_device, PCM_OUT \| PCM_MONOTONIC, &out->config); if (out->pcm[PCM_CARD_HDMI] && !pcm_is_ready(out->pcm[PCM_CARD_HDMI])) { ALOGE("pcm_open(PCM_CARD_HDMI) failed: 222 %s", pcm_get_error(out->pcm[PCM_CARD_HDMI])); pcm_close(out->pcm[PCM_CARD_HDMI]); return -ENOMEM; } if (out->pcm[PCM_CARD_HDMI]) pcm_close(out->pcm[PCM_CARD_HDMI]); out->pcm_device = 0; out->pcm[PCM_CARD] = pcm_open(PCM_CARD, out->pcm_device, PCM_OUT \| PCM_MONOTONIC, &out->config); if (out->pcm[PCM_CARD] && !pcm_is_ready(out->pcm[PCM_CARD])) { ALOGE("pcm_open(PCM_CARD) failed: %s", pcm_get_error(out->pcm[PCM_CARD])); pcm_close(out->pcm[PCM_CARD]); return -ENOMEM; } } if (out->device & AUDIO_DEVICE_OUT_SPDIF) { out->pcm_device = 0; out->pcm[PCM_CARD_SPDIF] = pcm_open(PCM_CARD_SPDIF, out->pcm_device, PCM_OUT \| PCM_MONOTONIC, &out->config); if (out->pcm[PCM_CARD_SPDIF] && !pcm_is_ready(out->pcm[PCM_CARD_SPDIF])) { ALOGE("pcm_open(PCM_CARD_SPDIF) failed: %s", pcm_get_error(out->pcm[PCM_CARD_SPDIF])); pcm_close(out->pcm[PCM_CARD_SPDIF]); return -ENOMEM; } } adev->out_device \|= out->device; if (out->device & AUDIO_DEVICE_OUT_ALL_SCO) { start_bt_sco(adev); #ifdef BT_AP_SCO // HARD CODE FIXME out->pcm[PCM_BT] = pcm_open(PCM_BT, 0, PCM_OUT \| PCM_MONOTONIC, &pcm_config_ap_sco); ret = create_resampler(48000, 8000, 2, RESAMPLER_QUALITY_DEFAULT, NULL, &out->resampler); if (ret != 0) { ret = -EINVAL; } #endif } if(adev->hdmiin_state){ ALOGD("%s HDMIin state open hdmiin route",__FUNCTION__); route_pcm_open(HDMI_IN_NORMAL_ROUTE); } return 0; } \|-- external/tinyalsa/pcm.c(PCM结构体) struct pcm { int fd; unsigned int flags; int running:1; int prepared:1; int underruns; unsigned int buffer_size; unsigned int boundary; char error[PCM_ERROR_MAX]; struct pcm_config config; struct snd_pcm_mmap_status mmap_status; struct snd_pcm_mmap_control mmap_control; struct snd_pcm_sync_ptr sync_ptr; void mmap_buffer; unsigned int noirq_frames_per_msec; int wait_for_avail_min; }; struct pcm pcm_open(unsigned int card, unsigned int device, unsigned int flags, struct pcm_config config) { struct pcm pcm; struct snd_pcm_info info; struct snd_pcm_hw_params params; struct snd_pcm_sw_params sparams; char fn[256]; int rc; pcm = calloc(1, sizeof(struct pcm)); if (!pcm \|\| !config) return &bad_pcm; /* TODO: could support default config here / pcm->config = config; snprintf(fn, sizeof(fn), "/dev/snd/pcmC%uD%u%c", card, device, flags & PCM_IN ? 'c' : 'p'); pcm->flags = flags; pcm->fd = open(fn, O_RDWR\|O_NONBLOCK); if (pcm->fd < 0) { oops(pcm, errno, "cannot open device '%s'", fn); return pcm; } if (fcntl(pcm->fd, F_SETFL, fcntl(pcm->fd, F_GETFL) & ~O_NONBLOCK) < 0) { oops(pcm, errno, "failed to reset blocking mode '%s'", fn); goto fail_close; } if (ioctl(pcm->fd, SNDRV_PCM_IOCTL_INFO, &info)) { oops(pcm, errno, "cannot get info"); goto fail_close; } param_init(¶ms); param_set_mask(¶ms, SNDRV_PCM_HW_PARAM_FORMAT, pcm_format_to_alsa(config->format)); param_set_mask(¶ms, SNDRV_PCM_HW_PARAM_SUBFORMAT, SNDRV_PCM_SUBFORMAT_STD); param_set_min(¶ms, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, config->period_size); param_set_int(¶ms, SNDRV_PCM_HW_PARAM_SAMPLE_BITS, pcm_format_to_bits(config->format)); param_set_int(¶ms, SNDRV_PCM_HW_PARAM_FRAME_BITS, pcm_format_to_bits(config->format) * config->channels); param_set_int(¶ms, SNDRV_PCM_HW_PARAM_CHANNELS, config->channels); param_set_int(¶ms, SNDRV_PCM_HW_PARAM_PERIODS, config->period_count); param_set_int(¶ms, SNDRV_PCM_HW_PARAM_RATE, config->rate); param_set_flag(¶ms, config->flag); if (flags & PCM_NOIRQ) { if (!(flags & PCM_MMAP)) { oops(pcm, -EINVAL, "noirq only currently supported with mmap()."); goto fail_close; } params.flags \|= SNDRV_PCM_HW_PARAMS_NO_PERIOD_WAKEUP; pcm->noirq_frames_per_msec = config->rate / 1000; } if (flags & PCM_MMAP) param_set_mask(¶ms, SNDRV_PCM_HW_PARAM_ACCESS, SNDRV_PCM_ACCESS_MMAP_INTERLEAVED); else param_set_mask(¶ms, SNDRV_PCM_HW_PARAM_ACCESS, SNDRV_PCM_ACCESS_RW_INTERLEAVED); if (ioctl(pcm->fd, SNDRV_PCM_IOCTL_HW_PARAMS, ¶ms)) { oops(pcm, errno, "cannot set hw params"); goto fail_close; } /* get our refined hw_params / config->period_size = param_get_int(¶ms, SNDRV_PCM_HW_PARAM_PERIOD_SIZE); config->period_count = param_get_int(¶ms, SNDRV_PCM_HW_PARAM_PERIODS); pcm->buffer_size = config->period_count config->period_size; if (flags & PCM_MMAP) { pcm->mmap_buffer = mmap(NULL, pcm_frames_to_bytes(pcm, pcm->buffer_size), PROT_READ \| PROT_WRITE, MAP_FILE \| MAP_SHARED, pcm->fd, 0); if (pcm->mmap_buffer == MAP_FAILED) { oops(pcm, -errno, "failed to mmap buffer %d bytesn", pcm_frames_to_bytes(pcm, pcm->buffer_size)); goto fail_close; } } memset(&sparams, 0, sizeof(sparams)); sparams.tstamp_mode = SNDRV_PCM_TSTAMP_ENABLE; sparams.period_step = 1; if (!config->start_threshold) { if (pcm->flags & PCM_IN) pcm->config.start_threshold = sparams.start_threshold = 1; else pcm->config.start_threshold = sparams.start_threshold = config->period_count * config->period_size / 2; } else sparams.start_threshold = config->start_threshold; /* pick a high stop threshold - todo: does this need further tuning / if (!config->stop_threshold) { if (pcm->flags & PCM_IN) pcm->config.stop_threshold = sparams.stop_threshold = config->period_count config->period_size * 10; else pcm->config.stop_threshold = sparams.stop_threshold = config->period_count * config->period_size; } else sparams.stop_threshold = config->stop_threshold; if (!pcm->config.avail_min) { if (pcm->flags & PCM_MMAP) pcm->config.avail_min = sparams.avail_min = pcm->config.period_size; else pcm->config.avail_min = sparams.avail_min = 1; } else sparams.avail_min = config->avail_min; sparams.xfer_align = config->period_size / 2; /* needed for old kernels / sparams.silence_threshold = config->silence_threshold; sparams.silence_size = config->silence_size; pcm->boundary = sparams.boundary = pcm->buffer_size; while (pcm->boundary 2 <= INT_MAX - pcm->buffer_size) pcm->boundary = 2; if (ioctl(pcm->fd, SNDRV_PCM_IOCTL_SW_PARAMS, &sparams)) { oops(pcm, errno, "cannot set sw params"); goto fail; } rc = pcm_hw_mmap_status(pcm); if (rc < 0) { oops(pcm, rc, "mmap status failed"); goto fail; } #ifdef SNDRV_PCM_IOCTL_TTSTAMP if (pcm->flags & PCM_MONOTONIC) { int arg = SNDRV_PCM_TSTAMP_TYPE_MONOTONIC; rc = ioctl(pcm->fd, SNDRV_PCM_IOCTL_TTSTAMP, &arg); if (rc < 0) { oops(pcm, rc, "cannot set timestamp type"); goto fail; } } #endif pcm->underruns = 0; return pcm; fail: if (flags & PCM_MMAP) munmap(pcm->mmap_buffer, pcm_frames_to_bytes(pcm, pcm->buffer_size)); fail_close: close(pcm->fd); pcm->fd = -1; return pcm; } int pcm_is_ready(struct pcm pcm) { return pcm->fd >= 0; }

2022-3-4 14:22:35 评论举报李汉荣