完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
扫一扫,分享给好友
quartus设计交通信号灯,分为自动,手动(可任意调节东西南北红绿灯),紧急,灭灯四种状态,自动状态下要求计时牌倒计时一个周期,红绿灯变换,重新进入下一个周期,具体要求如图一、二所示。
设置高电平进入自动模式,若直接在quartus电路图上接高低电平,红绿灯结果仿真正确如图三、四,但是如果用input输入高电平,红绿灯会出现没有信号的情况如图五、六所示,图七是整体电路图,在手动,紧急,灭灯状态下均正确,就是在自动模式下出现这个问题。 warning有以下几处 Warning: Tri-state node(s) do not directly drive top-level pin(s) Warning: Converted tri-state buffer "74257:inst22|29" feeding internal logic into a wire Warning: Converted tri-state buffer "74257:inst22|26" feeding internal logic into a wire Warning: Converted tri-state buffer "74257:inst22|22" feeding internal logic into a wire Warning: Converted tri-state buffer "74257:inst22|20" feeding internal logic into a wire Warning: Always-enabled tri-state buffer(s) removed Warning: Converted the fanout from the always-enabled tri-state buffer "74257:inst32|20" to the node "EWRED" into a wire Warning: Converted the fanout from the always-enabled tri-state buffer "74257:inst32|22" to the node "EWGREEN" into a wire Warning: Converted the fanout from the always-enabled tri-state buffer "74257:inst32|26" to the node "SWRED" into a wire Warning: Converted the fanout from the always-enabled tri-state buffer "74257:inst32|29" to the node "SWGREEN" into a wire Warning: Presettable and clearable registers converted to equivalent circuits with latches. Registers power-up to an undefined state, and DEVCLRn places the registers in an undefined state. Warning (13310): Register "7474:inst25|9" is converted into an equivalent circuit using register "7474:inst25|9~_emulated" and latch "7474:inst25|9~latch" Warning: timing Analysis is analyzing one or more combinational loops as latches Warning: Node "7474:inst25|9~latch" is a latch Warning: Found pins functioning as undefined clocks and/or memory enables Info: Assuming node "CP3" is an undefined clock Info: Assuming node "AUTOAND" is a latch enable. Will not compute fmax for this pin. Warning: Found 1 node(s) in clock paths which may be acting as ripple and/or gated clocks -- node(s) analyzed as buffer(s) resulting in clock skew Info: Detected ripple clock "7474:inst25|10" as buffer 请问各位大佬,错在哪里,该怎么解决这个问题,谢谢
|
|
相关推荐
1个回答
|
|
你正在撰写答案
如果你是对答案或其他答案精选点评或询问,请使用“评论”功能。
1307 浏览 1 评论
助力AIoT应用:在米尔FPGA开发板上实现Tiny YOLO V4
1038 浏览 0 评论
2382 浏览 1 评论
2087 浏览 0 评论
矩阵4x4个按键,如何把识别结果按编号01-16(十进制)显示在两个七段数码管上?
2349 浏览 0 评论
1864 浏览 49 评论
6006 浏览 113 评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-12-21 12:00 , Processed in 0.649924 second(s), Total 78, Slave 60 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号