8563E规格带有85620内存模块的锁定

Shawn，查看8563E手册，找到分析仪喜欢的I / O终结器。
很可能它喜欢看c / r AND l / f。
这可以解释为什么认为缺少某些东西。
在VEE中，默认值仅为新行（l / f）。通过仔细选择那些终结器，我在老式仪器上取得了成功。在仪器管理器中，编辑仪器，并将终结器修改为George TyrrellTestDynamics LLCThornton，COgeorget @ testdynamics.com--
---原始消息-----来自：“Shawn Crossland”致：“Vee Group（E-mail）”发送时间：2001年11月7日星期三7:11 AMS主题：vrf 8563E规格85620内存模块锁定>
所有，> Dan最近关于他的PC和sig gen锁定的问题提醒我>这个问题。>>我们有一个带有85620A内存模块和32K卡的8563E频谱分析仪。
当这个模块连接到规范，并且我发送'TS'>（带扫描）命令时，分析器*偶尔会产生一个错误>说没有足够的命令TS参数。>因为我们很少使用内存
模块，解决方法是>删除内存模块。>我们使用Vee和Delphi。
德尔福似乎发生了比> Vee更多的事情，但我确实记得Vee发生了这个问题。>任何想法？> -Shawn> P.S。
我尝试在TS命令之前和之后添加延迟，但它>不起作用。>> Shawn Crossland> Digital Receiver Technology Inc.>（301）916-5554 ext。
148> ------------------------------------------------
--------------------->这是由Majordomo管理的“vrf”maillist。
要向> maillist发送消息，只需发送电子邮件至“vrf@lvld.agilent.com”。
订阅和>取消订阅通过地址“vrf-request@lvld.agilent.com”完成。>如果您需要详细信息，只需将包含文本“help”>的消息发送到“vrf-request@lvld.agilent.com”
。> ------------------------------------------------
--------------------------------------------------
----------------------------------------这是“vrf”maillist，由。管理
管家。
要向该maillist发送消息，只需发送电子邮件至“vrf@lvld.agilent.com”。
订阅和取消订阅是通过地址“vrf-request@lvld.agilent.com”完成的。如果您需要详细信息，只需将包含“help”文本的消息发送到“vrf-request@lvld.agilent.com”.---
--------------------------------------------------
----------------



     以下为原文

  Shawn,

Check the 8563E manual to find what I/O terminators the analyzer likes to
see.  Chances are that it likes to see a c/r AND l/f.  This may explain why
it thinks something is missing.  In VEE, the default is new line only (l/f).
I have success with vintage instruments by carefully selecting those
terminators.

In Instrument Manager, edit the instrument, and modify the terminators to be



George Tyrrell
TestDynamics LLC
Thornton, CO
georget@testdynamics.com


----- Original Message -----
From: "Shawn Crossland"
To: "Vee Group (E-mail)"
Sent: Wednesday, November 07, 2001 7:11 AM
Subject: vrf 8563E Spec An Lockup With 85620 Memory Module


> All,
> Dan's recent question concerning his PC and sig gen locking up reminded
> me of this problem.
>
> We have an 8563E Spectrum Analyzer with the 85620A Memory Module and 32K
> card.  When this module is connected to the spec an, and I send a 'TS'
> (take sweep) command, the analyzer *occasionally* generates an error
> saying there were not enough arguments for command TS.
> Since we rarely use the memory module, the work around has been to
> remove the memory module.
> We use Vee as well as Delphi.  It seems to happen more with Delphi than
> Vee but I do recall this problem happening with Vee.
> Any ideas?
> -Shawn
> P.S.  I tried adding delay before and after the TS command, but it
> didn't work.
>
> Shawn Crossland
> Digital Receiver Technology Inc.
> (301) 916-5554 ext. 148
> ---------------------------------------------------------------------
> This is the "vrf" maillist, managed by Majordomo.  To send messages to
> this maillist, just email to "vrf@lvld.agilent.com".  Subscriptions and
> unsubscriptions are done through the address
"vrf-request@lvld.agilent.com".
> If you need details, just send a message containing the text "help"
> to "vrf-request@lvld.agilent.com".
> ---------------------------------------------------------------------

---------------------------------------------------------------------
This is the "vrf" maillist, managed by Majordomo.  To send messages to
this maillist, just email to "vrf@lvld.agilent.com".  Subscriptions and
unsubscriptions are done through the address "vrf-request@lvld.agilent.com".
If you need details, just send a message containing the text "help"
to "vrf-request@lvld.agilent.com".
---------------------------------------------------------------------