如何在GPIB上更改仪器的地址

>我无法更改GPIB14接口上任何仪器的地址。>高级手册的实验3-1（C：My DocumentsVEE ProgramsAdvSolutionsLab 3-1.vee）>是一个示例程序，它只是更改DMM的地址和它
根本不适合我...对于我们这些没有实验室3-1的人，您是1）尝试更改仪器本身的GPIB地址吗？
- 并非所有仪器都可以通过总线更改其地址。
您必须参考仪器手册才能确定。
- 我不建议在程序中动态执行此操作。
地址应手动设置，记录，具体投射 - 不要改变它。
2）或者您只是想改变VEE使用的地址？
- 也就是说，让VEE扫描它想要的仪器GPIB并锁定它吗？Les HammerPartnerComplete Test720 SW 14th St.Loveland，CO.80537Les.Hammer@CompleteTest.com ---您目前订阅的是vrf：r*** @
soco.agilent.com要订阅，请发送一封空白电子邮件至“join-vrf@it.lists.it.agilent.com”。要取消订阅，请发送空白电子邮件至“leave-vrf@it.lists.it.agilent.com”。
要将邮件发送到此邮件列表，请发送电子邮件至“vrf@agilent.com”。
如果您需要有关邮件列表的帮助，请发送邮件至“owner-vrf@it.lists.it.agilent.com”。



     以下为原文

  
> I can not change the address of any instrument on GPIB14 interface.
> Lab 3-1 of the advanced manual (C:My DocumentsVEE ProgramsAdv
SolutionsLab 3-1.vee)
> is a sample program that just changes the address of a DMM and it simply
does not work for me...

For those of us who don't have Lab 3-1, are you
  1) trying to change the GPIB address of the instrument itself?
      -- not all instruments can change their address over the bus.
         You would have to refer to the instrument manual to know for sure.
      -- and I wouldn't recommend doing this dynamically in a program.
         The address should be set manually, documented, cast in concrete -
don't change it.
  2) or are you just trying to change the address that VEE uses?
     -- That is, have VEE scan GPIB for the instrument it wants and lock on
to it?

Les Hammer
Partner
Complete Test
720 SW 14th St.
Loveland, CO.  80537
Les.Hammer@CompleteTest.com



---
You are currently subscribed to vrf as: r***@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list,  email "vrf@agilent.com".  
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".