请问MPLABx3.35项目必须具有可写的项目文件吗？

MPLABX 3.35让我疯狂。我所有的项目都在外部源代码控制下（TFS可以在Atmel Studio 7中进行接口）！这意味着，除非有意更改文件（添加文件等），否则只能读取项目文件。当使用预加载的项目打开X或试图运行编译器时，我得到了：Screenshot拒绝，讽刺的是，如果我签出项目文件，加载并构建，然后关闭X（否则项目文件中的更改没有被写入），然后将得到的文件与源控系统，没有差别。甚至没有时间戳被改变，这表明文件从未被写入。那么为什么文件需要写呢？？？？在以前的版本中，我能够通过清除“Force Makefile Regeneration...”设置：Screenshot拒绝。唉，它似乎什么都不做，文件需要写。有什么想法，或者这只是一个bug，已经被重新介绍了吗？AFAIR 3.10没有这个问题。不知道这3.35个之间是否有问题，任何帮助都能节省我很多时间。检查X上的一切并不是一种选择。很容易做出意外的改变。我只检查我打算改变的东西。



      以下为原文

    MpLABX 3.35 is driving me crazy. All of my projects are under external source control (would that TFS could be interfaced as it can be in Atmel Studio 7!) which means that project files are read only unless they are deliberately being changed (files added, etc.). When opening X with a pre-loaded project or trying to run the compiler, I get this:

Screenshot denied


Ironically, if I check out the project files, load and build then shut down X (otherwise the changes in the project files are not written) and then compare the resulting files with the latest in the source control system, there are NO differences. Not even the time stamp has been changed which indicates that the files were never written. So why do the files need to be writable???

With previous versions, I was able to manage this by clearing the "Force Makefile Regeneration..." setting:

Screenshot denied.

As you can see this setting is cleared in 3.35. Alas it appears to do nothing and the files need to be writable.

Any ideas or is this just a bug that has been re-introduced? AFAIR 3.10 does not have this problem. Do not know if anything in between that and 3.35 had the issue.

Any help would save me a lot of time! And checking out everything on starting X is NOT an option. It is too easy to make accidental changes. I check out only what I intend to change.