网表包含不起作用

您好，我有一个用于2端口无源组件的SPICE / Spectre子电路。
我试图通过网表导入和Netlist include元素在ADS 2011.10中使用它。
我已按照文档“Netlist Translator for SPICE and Spectre”中的所有说明进行操作，并且生成的ADS网表看起来很好。
但是尽管如此，当我尝试在S参数模拟中使用生成的组件时，我在模拟状态窗口中收到警告：只有一个设备被连接的节点数（拓扑校正）：2并且模拟结果是
零。
这里发生了什么，我错过了什么？
我已经尝试重命名与netlist include元素一起出现的两个端口，但没有快乐。
顺便说一句，我真的认为安捷伦应该有一个如何包含SPICE子电路的正确例子。
我能找到的唯一例子是MOSFET模型声明而不是等效电路。
我已经将Spectre和ADS网表列入了组件（电容器）。
C_0201_1n0.scs1.3 KB



     以下为原文

  Hello, I have a SPICE/Spectre subcircuit for a 2-port passive component.
I have tried to use it in ADS 2011.10 via netlist import and the Netlist include element.
I have followed all the instructions in the document "Netlist Translator for
SPICE and Spectre", and the the resulting ADS netlist looks fine.

But in spite of this, when I try to use the resulting component in an S-parameter
simulation, I get a warning in the simulation status window:

Number of nodes with only one device attatched (topology corrected): 2

and the simulation results are zero. What is going on here, what am I missing?
I have tried renaming the two ports that appear together with the netlist include
element, but no joy.

BTW, I really think Agilent should have a proper example of how to include a
SPICE subcircuit. The only example I could find was for a MOSFET model
statement and not for an equivalent circuit.

I have attatched the Spectre and ADS netlists for the component (a capacitor).   
附件

• C_0201_1n0.net1.8 KB
• C_0201_1n0.scs1.3 KB