C18怎么过渡到C32

嘿，大家好，我一直在为PIC18F4680控制器编写基本的C18代码，并且仍然称自己是新手。我开始使用PIC18F4680的朋友代码，编辑和检查它是为了我的目的。我所有的代码基本上都是一样的，我更关注CAN而不是其他任何东西。每次更新代码我都会学到新东西，并且变得越来越自信。虽然我想我可以从头开始编写代码，但是我仍然有一个Core项目，并且使用它作为我的基本时间，我想要一个新的控制器。我使用相同的CLK，相同的控制器，所以我的核心基础项目将永远工作。我的PIC18F4680越来越不相关了，而且随着我的学习，我需要越来越多的功能，我正在寻找使用GLCD和XBEE等……所以，我正在寻找使用C32编译器的PIC32转换，我只是想知道这有多简单？是值得的吗？C18和C32的主要区别是什么？我有一个PIC32 eval板，我可以开始练习，但我也有一个PICds24 eval，我是从ds24开始还是直接去PIC32？任何建议都是伟大的



      以下为原文

    Hey all

I have been writting basic C18 code for mainly the PIC18F4680 controller and would still refer to myself as a novice.  I started by using a friends code for the PIC18F4680 and edited and chnaged it for my purpose.  All my code is basically the same and I been focus more on CAN then anything else.

I learn new things everytime I update the code and becoming more and more confident.  Although if i tried I think i could write my code from scratch I still have a Core project and use this as my base evertime I want a new Controller.  I use the same CLK, same controller so my Core base project will always work.

Now....  My PIC18F4680 is becoming less and less relavant and I require more and more functions as I learn, I'm looking to use a GLCD an XBEE ect....  so, I am looking to transistion to a PIC32 using C32 Complier, I just wondered how easy is this to do?  Is is worth it?  Whats the main difference between C18 and C32?

I have a PIC32 Eval board which I could start praticing with but I also have a PICds24 eval aswell, do I start with the ds24 or go straight to PIC32?

Any advise would be great

Jason