完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
嗨,大家好,
我试图在我的Win 7 PC上使用FX3 USB测试棒,并尝试运行我已经将FX3超级Mutt3.0工具插入到我的PC中的UBTCDCest,并且显示WiUSB(078E),并且该设备运行良好,当我尝试将驱动程序更改为UBTCD.IF时,如所附的屏幕截图所示,然后说“Windows”无法加载该硬件的设备驱动程序。驱动程序可能损坏或丢失。(代码39)“任何人请让我知道我错过了什么?” 如果我试图改变为“美国压力”,它更灾难性的OS疯狂。 请教。 错误驱动程序 32.9 K 以上来自于百度翻译 以下为原文 Hi All, I trying to use FX3 u*** test stick on my win 7 pc and trying to run USBTCD tests for that I have inserted the FX3 super MUTT 3.0 tool into my PC and the WinUSB (078E) is shown up and the device works fine and when i try to change the driver to USBTCD.inf as shown in the attached screen shot then it says "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" anyone please let me know what am I missing? If I try to change to "u***stress" its even more catastrophic the OS crahes. Please advice.
|
|
相关推荐
1个回答
|
|
你是否尝试了以下链接中提到的所有内容:
HTTP://PCSupp.Abto.COM/OD/FunByError MeaseA/A/CODE-39Error .HTM 谢谢 尼基尔 以上来自于百度翻译 以下为原文 Did you try all the things mentioned in the link below: http://pcsupport.about.com/od/findbyerrormessage/a/code-39-error.htm Thanks Nikhil |
|
|
|
只有小组成员才能发言,加入小组>>
717个成员聚集在这个小组
加入小组1904 浏览 1 评论
1655 浏览 1 评论
3410 浏览 1 评论
请问可以直接使用来自FX2LP固件的端点向主机FIFO写入数据吗?
1570 浏览 6 评论
1382 浏览 1 评论
CX3连接Camera修改分辨率之后,播放器无法播出camera的画面怎么解决?
194浏览 2评论
184浏览 2评论
使用stm32+cyw43438 wifi驱动whd,WHD驱动固件加载失败的原因?
325浏览 2评论
353浏览 1评论
66浏览 1评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-4-28 23:38 , Processed in 0.607983 second(s), Total 73, Slave 57 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号