无法读取仿真内存

大家好。我对MPLAB-X还不是很有经验，也不知道如何处理我现在的问题。我正在开发一个使用16F1782的项目。我正在用适当的仿真头AC244064进行调试，它上面有一个pic16f1789-me芯片。我的代码是用汇编程序编写的，并且我使用绝对模式——在项目属性页上勾选适当的复选框。我看到两个问题——希望是相关的。第一个问题是虽然标头看起来正确编程，但代码永远不会超过程序内存中的CaldBooT位置。在暂停模拟器之后，我得到以下消息：“运行时发生错误。（两行）我注意到的另一件事是在屏幕左边的仪表板面板中，Program Memory显示为使用的641个单词（2048个单词中）。但是，数据存储器被显示为使用0字节（256字节）。我不知道如何解决这个问题。很可能是我的一个错误-我希望有人能给我指导。非常感谢！德维恩



      以下为原文

    Good day to all.

I'm not yet very experienced with MPLAB-X and don't know how to deal with the problem that I am currently having.

I'm developing with a project that uses the 16F1782.  I'm debugging with the appropriate emulation header - AC244064, which has a pic16f1789-me chip on board.

My code is written in assembler and I am using absolute mode - the appropriate check box is ticked on the project properties page.

I see two problems - hopefully related.

The first problem is that although the header appears to program correctly, the code never gets past the ColdBoot location in program memory.  Upon halting the emulator, I get the following message: "An Error occurred while running.  Failed to read emulation memory." (on two lines)

The other thing that I noticed is that in the Dashboard panel on the left side of the screen, Program Memory is shown as 641 words used (out of 2048 words).  However, Data memory is shown as 0 bytes used (out of 256 bytes).

I'm not sure how to troubleshoot this.  Most likely an error on my part - I'm hoping that someone can give me guidance.

Many thanks!

dwayne