使用Matlab 2016a阻止集合构建错误

嗨，Ali，需要进一步的输入：你使用的是哪一个BuBSET版本？您有哪些matlab工具（在matlab提示符下键入ver将提供所有必需的输入）可以尝试编译提供的示例吗？键入PICNFILE，以复制当前文件夹中的示例，并按照指令编译它们。需要几分钟。你最后得到的是关于成功/失败的总结。如果你也有错误，请提供报告。谢谢，鲁宾。



      以下为原文

    Hi Ali,
 
Further input would be required: 
Which Blockset version are you using ?
Which matlab tools do you have (Typing ver at matlab prompt would provide all required inputs)
 
Could you try compiling example provided ?
type 'picInfo' to copy examples in current folder, and follow instructions to compile them all. would take few minutes. You end up with a summary about success/fall.
If you also get errors, please provide the report.
 
Thanks,
Lubin

嗨，鲁宾，首先很抱歉，因为我被一些东西卡住了。我正在使用下面提到的块集版本：安装了微芯片块集3.38。请参阅信息和示例。下面是我的工具箱安装Matlab版本：90.0.34 1360（R2016A）MATLAB许可号：722433操作系统：微软Windows 10家庭版本10（构建14393）Java版本：Java1.7.0Y60-B19与甲骨文公司Java热点（TM）64位服务器VM混合模式-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------（R2016a）生物信息学工具箱版本4.6（R2016a）通信系统工具箱版本6.2（R2016a）计算机视觉系统工具箱版本7.1（R2016a）控制系统工具箱版本10.0（R2016a）曲线拟合工具箱版本3.5.3（R2016a）DSP系统工具箱版本9.2（R2016a）数据采集到olbox版本3.9（R2016a）数据库工具箱版本6.1（R2016a）数据馈送工具箱版本5.3（R2016a）计量经济学工具箱版本3.4（R2016a）嵌入式编码器版本6.10（R2016a）微芯片版本3.38的嵌入式目标（R20xx）滤波器设计HDL编码器版本3.0（R2016a）金融工具工具箱ox版本2.3（R2016a）金融工具箱版本5.7（R2016a）固定点设计器版本5.2（R2016a）模糊逻辑工具箱版本2.2.23（R2016a）全局优化工具箱版本3.4（R2016a）HDL编码器版本3.8（R2016a）HDL验证器版本5.0（R2016a）图像采集工具箱版本5.0（R2016a）6a)图像处理工具箱版本9.4(R2016a)仪表控制工具箱版本3.9(R2016a)LTE系统工具箱版本2.2(R2016a)MATLAB编码器版本3.1(R2016a)MATLAB编译器版本6.2(R2016a)MATLAB编译器SDK版本6.2(R2016a)MATLAB报告生成器版本5.0(R2016a)映射工具框版本4.3(R2016a)模型预测控制工具箱版本5.2(R2016a)基于模型的校准工具箱版本5.1(R2016a)神经网络工具箱版本9.0(R2016a)OPC工具箱版本4.0.1(R2016a)优化工具箱版本7.4(R2016a)并行计算工具箱版本6.8(R2016a)部分al微分方程工具箱版本2.2（R2016a）相控阵系统工具箱版本3.2（R2016a）多空间错误查找器版本2.1（R2016a）多空间代码验证器版本9.5（R2016a）RF工具箱版本3.0（R2016a）机器人系统工具箱版本1.2（R2016a）鲁棒控制工具箱版本6.1（R2016a）6a)信号处理工具箱版本7.2(R2016a)模拟生物学版本5.4(R2016a)SimEvents版本5.0(R2016a)SimRF版本5.0(R2016a)Simscape版本4.0(R2016a)Simscape Driveline版本2.10(R2016a)Simscape电子版本2.9(R2016a)Simscape流体版本2.0(R2016a)Simscape Multibody版本4.8（R2016a）Simscape电力系统版本6.5（R2016a）Simulink 3D动画版本7.5（R2016a）Simulink代码检查器版本2.5（R2016a）Simulink代码检查器版本8.10（R2016a）Simulink控制设计版本4.3（R2016a）Simulink设计优化版本3.0（R2016a）Simulink设计Ver验证程序版本3.1(R2016a)Simulink桌面实时版本5.2(R2016a)Simulink PLC编码器版本2.1(R2016a)Simulink实时版本6.4(R2016a)Simulink报告生成器版本5.0(R2016a)Simulink测试版本2.0(R2016a)Simulink验证和验证版本3.11(R2016a)Spreadsheet链接版本3.2.5(R2016a)状态流版本8.7(R2016a)统计和机器学习工具箱版本10.2(R2016a)符号数学工具箱版本7.0(R2016a)系统识别工具箱版本9.4(R2016a)交易工具箱版本3.0(R2016a)车辆网络工具箱版本3.1(R2016a)愿景1.2(R2016a)WLAN系统工具箱1.1(R2016a)WLAN系统工具箱1.1(R2016a)小波工具箱4.16(R2016a)>>>范例模型编译>范例模型编译生成结果:不Ok========>；AUAV_V3_V3_33EP512VVV3_AUAV_V3_V3_VV3_IVVV3_33EP5353535353EP512MU810_MPU6000_II2C_HMC5883_感测器测试.mdl不确定===不确定==不确定。=>Explorer16_33FJ25256GP716161616GP716GP716_简单过滤器.mdlNot Ok===>；MCLV_板_33FV板33F252525252525CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC33F2525252525CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCMicrostick_II_33EP128MC202_Drotek_I2C_MS5611_TempAnd压力.mdlNot Ok===>；Microstick_II_II_33EP128MC202_裸.mdlNot Ok===>；Microstick_II_II_33EP128MC202MC202_裸.mdlNot Ok======>；Microstick_II_33FJ32323232EP128MC202MC202_bare.mdlNot Ok=======>；Microstick_II_II_33FJJJJJJJJJ128MC128MC128128MC802_Bare.mdl不Ok=========mdl不确定=============。Microstick_II_33FJ64MC802_bis.mdlNot Ok==>Microstick_II_PlusDev._33EP128MC202_Temperature_PICGUI.mdlNot Ok=>UDB5_33FJ256GP710A_SPI_MPU6000_SensorsTest.mdl感谢您提前提供的帮助



      以下为原文

    Hi Lubin,
 
First of all sorry for the late reply as I was stuck with some stuff.
 
I am using Block-set version mentioned below:
Microchip Blockset 3.38 installed. See info and examples.
and following is my toolbox installed
 
MATLAB Version: 9.0.0.341360 (R2016a)
MATLAB License Number: 722433
Operating System: Microsoft Windows 10 Home Version 10.0 (Build 14393)
Java Version: Java 1.7.0_60-b19 with Oracle Corporation Java HotSpot(TM) 64-Bit Server VM mixed mode
----------------------------------------------------------------------------------------------------
MATLAB Version 9.0 (R2016a)
Simulink Version 8.7 (R2016a)
Aerospace Blockset Version 3.17 (R2016a)
Aerospace Toolbox Version 2.17 (R2016a)
Antenna Toolbox Version 2.0 (R2016a)
Audio System Toolbox Version 1.0 (R2016a)
Bioinformatics Toolbox Version 4.6 (R2016a)
Communications System Toolbox Version 6.2 (R2016a)
Computer Vision System Toolbox Version 7.1 (R2016a)
Control System Toolbox Version 10.0 (R2016a)
Curve Fitting Toolbox Version 3.5.3 (R2016a)
DSP System Toolbox Version 9.2 (R2016a)
Data Acquisition Toolbox Version 3.9 (R2016a)
Database Toolbox Version 6.1 (R2016a)
Datafeed Toolbox Version 5.3 (R2016a)
Econometrics Toolbox Version 3.4 (R2016a)
Embedded Coder Version 6.10 (R2016a)
Embedded Target for Microchip Version 3.38 (R20xx)
Filter Design HDL Coder Version 3.0 (R2016a)
Financial Instruments Toolbox Version 2.3 (R2016a)
Financial Toolbox Version 5.7 (R2016a)
Fixed-Point Designer Version 5.2 (R2016a)
Fuzzy Logic Toolbox Version 2.2.23 (R2016a)
Global Optimization Toolbox Version 3.4 (R2016a)
HDL Coder Version 3.8 (R2016a)
HDL Verifier Version 5.0 (R2016a)
Image Acquisition Toolbox Version 5.0 (R2016a)
Image Processing Toolbox Version 9.4 (R2016a)
Instrument Control Toolbox Version 3.9 (R2016a)
LTE System Toolbox Version 2.2 (R2016a)
MATLAB Coder Version 3.1 (R2016a)
MATLAB Compiler Version 6.2 (R2016a)
MATLAB Compiler SDK Version 6.2 (R2016a)
MATLAB Report Generator Version 5.0 (R2016a)
Mapping Toolbox Version 4.3 (R2016a)
Model Predictive Control Toolbox Version 5.2 (R2016a)
Model-Based Calibration Toolbox Version 5.1 (R2016a)
Neural Network Toolbox Version 9.0 (R2016a)
OPC Toolbox Version 4.0.1 (R2016a)
Optimization Toolbox Version 7.4 (R2016a)
Parallel Computing Toolbox Version 6.8 (R2016a)
Partial Differential Equation Toolbox Version 2.2 (R2016a)
Phased Array System Toolbox Version 3.2 (R2016a)
Polyspace Bug Finder Version 2.1 (R2016a)
Polyspace Code Prover Version 9.5 (R2016a)
RF Toolbox Version 3.0 (R2016a)
Robotics System Toolbox Version 1.2 (R2016a)
Robust Control Toolbox Version 6.1 (R2016a)
Signal Processing Toolbox Version 7.2 (R2016a)
SimBiology Version 5.4 (R2016a)
SimEvents Version 5.0 (R2016a)
SimRF Version 5.0 (R2016a)
Simscape Version 4.0 (R2016a)
Simscape Driveline Version 2.10 (R2016a)
Simscape Electronics Version 2.9 (R2016a)
Simscape Fluids Version 2.0 (R2016a)
Simscape Multibody Version 4.8 (R2016a)
Simscape Power Systems Version 6.5 (R2016a)
Simulink 3D Animation Version 7.5 (R2016a)
Simulink Code Inspector Version 2.5 (R2016a)
Simulink Coder Version 8.10 (R2016a)
Simulink Control Design Version 4.3 (R2016a)
Simulink Design Optimization Version 3.0 (R2016a)
Simulink Design Verifier Version 3.1 (R2016a)
Simulink Desktop Real-Time Version 5.2 (R2016a)
Simulink PLC Coder Version 2.1 (R2016a)
Simulink Real-Time Version 6.4 (R2016a)
Simulink Report Generator Version 5.0 (R2016a)
Simulink Test Version 2.0 (R2016a)
Simulink Verification and Validation Version 3.11 (R2016a)
Spreadsheet Link Version 3.2.5 (R2016a)
Stateflow Version 8.7 (R2016a)
Statistics and Machine Learning Toolbox Version 10.2 (R2016a)
Symbolic Math Toolbox Version 7.0 (R2016a)
System Identification Toolbox Version 9.4 (R2016a)
Trading Toolbox Version 3.0 (R2016a)
Vehicle Network Toolbox Version 3.1 (R2016a)
Vision HDL Toolbox Version 1.2 (R2016a)
WLAN System Toolbox Version 1.1 (R2016a)
Wavelet Toolbox Version 4.16 (R2016a)
>>
 
examples models compilation generated result:
Not Ok ==> AUAV_V3_33EP512MU810_I2C_BMP180.mdl
Not Ok ==> AUAV_V3_33EP512MU810_SPI_MPU6000__I2C_HMC5883_SensorsTest.mdl
Not Ok ==> Explorer16_33FJ256GP710_SimpleFilter.mdl
Not Ok ==> MCLV_Board_33Fj256MC710A_BLDC_wHall_async_2_10Khz.mdl
Not Ok ==> Microstick_II_33EP128MC202_CustomCFunCall.mdl
Not Ok ==> Microstick_II_33EP128MC202_Drotek_I2C_MPU6050_HMC5883L_AGM.mdl
Not Ok ==> Microstick_II_33EP128MC202_Drotek_I2C_MS5611_TempAndPressure.mdl
Not Ok ==> Microstick_II_33EP128MC202_bare.mdl
Not Ok ==> Microstick_II_33FJ128MC802_Drotek_I2C_MPU6050_HMC5883L_AGM.mdl
Not Ok ==> Microstick_II_33FJ128MC802_MCU_TaskProfiling.mdl
Not Ok ==> Microstick_II_33FJ128MC802_bare.mdl
Not Ok ==> Microstick_II_33FJ64MC802_bare.mdl
Not Ok ==> Microstick_II_PlusDevBoard_33EP128MC202_Temperature_PICGUI.mdl
Not Ok ==> UDB5_33FJ256GP710A_SPI_MPU6000_SensorsTest.mdl
 
 
Thank you for your help in advance
 
Thanks,
Ali Meraj

嗨，鲁宾，这是输出----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Blockset中的C：程序文件（x86） Microchip  Matlab工具-链接到MPLAB X到程序芯片是OK1编译器（S），用于16位芯片：-C/程序文件（x86）/Microchip /XC16/V1.30＆LT；返回& gt；我正在研究3EP512MU810芯片。问候，Ali



      以下为原文

     
Hi Lubin,
 
here is the output
--------------------------------------------
Microchip Blockset 3.38 Installed:
--------------------------------------------
Refreshing cache...
- Blockset in C:Program Files (x86)MicrochipMatlabTools
- Link to MPLAB X to program chip is Ok
1 Compiler(s) found for 16 bits chip:
- C:/Program Files (x86)/Microchip/xc16/v1.30
<--return
>>
 
I am working on 33EP512MU810 Chip.
Regards,
Ali

嗨，阿里，安装程序块和相关工具（XC编译器+MPLAB X到程序芯片）似乎没问题。我们需要检查一下Windows 10和Simulink的兼容性问题。Simulink正常工作吗？如果为dsPIC打开用于代码生成的模型（使用示例），那么打开“主块”时会发生什么？在打开DSPIC库块时，您看到了什么错误吗？这些块使用一种编译的DLL，其名称是“MEX文件”。我想知道这些是否会引起Windows 10的问题。谢谢，鲁宾。



      以下为原文

     
Hi Ali,
 
Installation of the blockset and related tools (XC compiler + MPLAB X to program chip) seems all ok.
 
We need to check for a possible issue with Windows 10 compatibility with Simulink.
Is Simulink working as usual?
 
If you open a model for code generation (use an example) for a dsPIC, what happens when you open the "Master Block"? Do you see any error while opening dsPIC library block?
These blocks use kind of compiled dll whose name are "mex files". I am wondering if these might cause any issue with windows 10.
 
Thanks,
Lubin

嘿，当试图从一个简单的模型只使用“微芯片主”和“编译器选项”块旁边的“C函数调用”块来生成代码时，我也遇到了类似的问题。非常感谢您的帮助。Matlab ver:picInfo(“检查”)代码生成日志(我的模型):picInfo(“编译器选项”)。示例编译：不幸的是，Microstick_II_33EP128MC202_CustomCFunCall.mdl似乎工作得很好。但是我仍然不知道为什么我的模型不能工作。我试过：-使用或不使用DD-改变微芯片主编译器选项块中的所有设置（以适应示例模型）-从头开始创建一个新模型。也许有人能给我一个提示，为什么会出现这个错误。然后我可能找到问题.附加信息（虽然我不能想象它与此有什么关系）：我的自定义C代码只使用==Operators no！=所有= =使用变量和常数（例如0x02U或类似）感谢很多提前。



      以下为原文

    Hey there,
 
I got kind of a similar problem when trying to generate code from a simple model using only the "C Function Call" block beside the "Microchip Master" and "Compiler Options" blocks.
 
I'd highly appreciate your help with this.
 
Matlab ver:

 
picInfo('check')

 
code generation log (my model):

 
 
picInfo('examples') Examples compilation:

 
Unfortunately the Microstick_II_33EP128MC202_CustomCFunCall.mdl seems to work just fine.
Still I got no idea why my model isn't working. I tried to:
- use or not use a DD
- change all the settings in Microchip Master and Compiler Options blocks (to fit the example model)
- make a new model from scratch
 
Maybe someone could give me a hint, why this error occurs. Then I might be able to find the issue.
 
additional Info (although I can't imagine that it has anything to do with that):
my custom C-Code only uses == Operators no !=. All == are used with a variable and a constant (eg. 0x02U or similar)
 
Thanks a lot in advance.