完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
我正在使用STM32CubeFunctionPack_MOTENV1_V3.0.0中的代码用于传感器磁贴。
初始我使用STlink加载'Projects Multi Applications MOTENV1 Binary STM32L476RG-SensorTile'MOTENV1_ST_BL.hex。 然后连接到ST BlueMS。 当我在应用程序中尝试“固件升级”OTA功能时。 我选择'MOTENV1_ST.bin'并将其复制到手机。 尝试了几次OTA程序,结果总是失败'发送数据错误'。 在Phone for OTA上使用的二进制文件是否正确? 问候, 费利克斯 以上来自于谷歌翻译 以下为原文 I am using the code from STM32CubeFunctionPack_MOTENV1_V3.0.0 for sensor tile. Initial I used the STlink to load the 'ProjectsMultiApplicationsMOTENV1BinarySTM32L476RG-SensorTile' MOTENV1_ST_BL.hex. Then connect to the ST BlueMS. When I trying out the 'Firmware upgrade' OTA feature in the Apps. I select the 'MOTENV1_ST.bin' and copy it to the Phone. Tried a few times of the OTA procedure and it always fail at the end 'Error sending the data'. Is the binary file used on Phone for OTA correct ?? Regards, Felix |
|
相关推荐
1个回答
|
|
好的,最后使用我自己的构建二进制文件让FOTA工作。不知何故,发布包中的二进制文件在发送过程中始终存在错误。
以上来自于谷歌翻译 以下为原文 OK, finally get FOTA working using my own build binary file. Somehow, the binary in release package always has error during send. |
|
|
|
只有小组成员才能发言,加入小组>>
请教:在使用UDE STK时,单片机使用SPC560D30L1,在配置文件怎么设置或选择?里面只有SPC560D40的选项
1616 浏览 1 评论
2303 浏览 1 评论
请问是否有通过UART连接的两个微处理器之间实现双向值交换的方法?
1520 浏览 1 评论
2904 浏览 6 评论
5402 浏览 21 评论
400浏览 4评论
686浏览 4评论
在Linux上安装Atollic TRUEStudio的步骤有哪些呢?
298浏览 3评论
使用DMA激活某些外设会以导致外设无法工作的方式生成代码是怎么回事
749浏览 3评论
637浏览 3评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-5-15 17:49 , Processed in 1.006135 second(s), Total 76, Slave 60 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号