BM20不自动连接到上一个配对设备

嘿，所有的，我的冒险与BM20继续。困扰我的一件非常恼人的事情是，BM20从不重新连接到它配对/连接的最后一个设备，即使在UI工具中，我已经启用了“重新连接最后一个”。有人知道为什么会发生这样的事情吗？这里是我如何重建问题。从PC或电话连接或配对BM20。电源周期BM20。设备不自动重新连接。当您选择连接到手机上的BM20，它要求配对请求通知，即使它已经配对我的电话。之后，它工作良好。这有点烦人。然而，对于PC（Windows 10），它甚至更糟！要重新连接到BM20在电源周期后，我必须删除设备和重新配对它通过把BM20到配对模式，从而重新加载串行COM端口等。这是可怕的，真的很难编程，因为我试图使PC接口和通信器的BM20。有什么想法？杰瑞米



      以下为原文

    Hey all,
   So, my adventures with the BM20 continue.  One really annoying thing that keeps bothering me is that the BM20 never reconnects to the last device it paired/connected to even though in the UI tool I have "reconnect last" enabled.  Does anyone have any ideas why this would be happening or how to fix it?
Here is how I recreate the problem.

• Connect or pair to the BM20 from PC or phone.
• Power cycle BM20.
• Device does not automatically reconnect.
  

When you choose to connect to the BM20 on a phone, it asks for a pairing request notification even though it is already paired to my phone.  After that it works fine.  That is kinda annoying.  However, for PC (windows 10) it is even worse!  To reconnect to a BM20 after power cycle, I have to remove the device and re-pair it by putting the BM20 into pairing mode thus reloading the serial com ports, etc.  This is horrible and really hard to program for since I'm trying to make a PC interface and communicator to the BM20.

Any Ideas?
Jeremy