MPLAB-X 3.55无法识别XC16编译器

有时你必须“重说”（即……）说服他：）XC16安装在MPLABX窗格的某个地方…



      以下为原文

    Sometimes you have to "re-tell" (i.e. ... convince him :) ) that a XC16 is installed, somewhere in the MPLABX panes...

我已经查看了我可以想象的每个MPLAB-X角落，我找不到刷新编译器列表的地方…实际上我只看到了在项目属性中列出的编译器（右键单击一个项目并选择属性）。E：在Windows 7启动按钮程序列表中，我可以导航到XC16“文件夹”，只找到“卸载xC16”作为捷径……确实很奇怪。



      以下为原文

    I have looked in every MPLAB-X corner I can imagine and there is nowhere I can find a place to refresh the compiler list...
In fact I see the compilers listed only in the project properties (right-click a project and select Properties).
But as stated above all I can see is this stupid "Not found".
Like this:
 

 
And in Windows7 Start button Programs list I can navigate to the XC16 "folder" and find only "Uninstall XC16" as a shortcut...
Very strange indeed.

卸载它并重新安装它，所有版本都在MPLAB关闭。



      以下为原文

    Uninstall it and Install it again with All versions on Mplab Closed.

为了检查我启动了MPLAB 8.84，我的最后一个项目出现了。在MPLAB 8中有菜单项来选择工具套件并设置工具套件的位置。但是XC16 1.31（上星期刚安装的一个）已经在这个环境中存在，而我不需要做任何事情。ST可以通过在语言工具选择框中选择它来切换它。这真的让我吃惊，在这种情况下MPLAB-X如何不知道编译器…卸载和重新安装有什么好处？在MPLAB-X中是否要求编译器安装在“C:程序文件”下面？这是我的系统开发工具中的NO！在MPLAB-X上存储编译器位置的确切位置是什么？编辑：我在我的计算机上查看了注册表，发现：HKEY-CurrTyAuth[SufficeMicrochip  LoalGotoOsLxC16]这里写的是XC16的当前位置，所以信息肯定是存在的！为什么MPLAB-X不把它捡起来？



      以下为原文

    In order to check I started MPLAB 8.84 and my last project appeared there.
In MPLAB 8 there are menu items to select the tool suite and to set the location of a tool suite.
But XC16 1.31 (the one I just installed last week) is already present in this environment without me having to do anything, I just can switch the project to it by selecting it in the language tool selection box.
It really beats me how MPLAB-X in such a situation can be unaware of the compiler...
What good would uninstalling and re-installing do?
 
Is there a requirement in MPLAB-X that the compiler is installed below "C:Program Files"?
That is a no-no in my system for development tools!
 
Where exactly is the compiler locations stored on MPLAB-X?
EDIT:
I looked in the Registry on my computer and found this:
HKEY_CURRENT_USERSoftwareMicrochipLanguageToolsXC16
Here is written the current location of XC16, so the information is for sure present!
Why does MPLAB-X not pick it up?
 

但是我咬了一下子弹，卸载了我在磁盘上找到的以前的XC16版本（从上星期的2014和1.31中发现了1.21个）。然后我再次安装了1.31个，这次我在安装对话框中检查了“添加XC16到路径”项，这是以前没有检查过的。我不知道这对于MPLAB-X是必要的。结果是MPLAB-X确实识别了安装：但是它也弹出了一个错误对话框，当我点击它时，它打开了一个消息列表：这个“XC16：没有许可证或错误”是什么？我安装了免费版本毕竟…



      以下为原文

    But I bit the bullet and uninstalled both previous XC16 versions I found on my disk (1.21 from 2014 and 1.31 from last week).
Then I installed 1.31 again and this time I checked the item "Add XC16 to the PATH" item in the setup dialog, it was unchecked before. I don't know if this is necessary for MPLAB-X...
 
Result afterwards is that MPLAB-X does recognize the installation:

 
But it also pops up an error dialogue, which opens a message list when I click on it:

What is this "XC16: Not licensed or error" all about? I installed the FREE version after all...
 
 

如果您正在使用XC16作为免费版本，请尝试安装MPLABX 3.60，在我的情况下，删除了授权NAG消息，出现在3.55



      以下为原文

    If you are using XC16 as free version try installing MPLabX 3.60
In my case that removed the licensing nag messages, which appeared with 3.55

谢谢，现在在MPLAB-X 3.60上，不再有任何编译器NAG！我也使用这个建议来升级一个工具（它应该事先说什么工具，但没有）。它原来是关于32位编译器的东西，我无论如何都不使用它。它现在还是被更新了。



      以下为原文

    Thanks,
now on MPLAB-X 3.60 and no longer any compiler nag! :)
I also used the suggestion to upgrade a tool (it should say beforehand which tool but does not).
It turned out to be something concerning the 32 bit compiler, which I don't use anyway.
Still it is now updated.

我认为，Cinzia指的是下面的东西：菜单“工具”&菜单项“选项”&类别“嵌入”&标签“构建工具”，你可以在那里找到一个编译器列表。还有一个按钮“扫描构建工具”。如果一切失败，另一个按钮允许“添加自定义编译器…”。如果没有重新安装，这可能是可行的。



      以下为原文

    I think, Cinzia was referring to the following thing:
 
menu "Tools" > menu entry "Options" > category "Embedded" > tab "Build Tools"
 
You can find a list of compilers there. There is also a button "Scan for Build Tools". And if everything fails another button allows to "Add Custom Compiler ...". Probably that could have worked without re-installation.
   Attached Image(s)

以前没有找到它，它看起来像一堆IDE本身的插件，像设置编辑器着色等等。现在我很好，但是在此期间我已经重新安装XC16并安装了一个更新的MPLAB-X。XC16编译器是可见的。：）



      以下为原文

    Did not find it before, it looked to me like a bunch of plug-ins for the IDE itself like setting editor coloring etc.
Now I am good, but in the meantime I have reinstalled XC16 and installed a newer MPLAB-X also.
The XC16 compiler is visible. :)
 

下次发生这种情况时，在安装编译器后，尝试进入“构建工具”，tab moser指出。单击“添加…”并浏览/进入编译器的bin目录IE & lt的路径；无论是G.Microchip xC16V1.30Bin。单击“打开”，然后“OK”。



      以下为原文

    Next time that happens, after installing the compiler try going to the "Build Tools" tab moser pointed out.
Click "Add..." and browse to/enter the path to the compiler's bin directory ie Microchipxc16v1.30bin.
Click "Open" and then "OK"
 
 

非常感谢你。这篇文章帮助了me.regards Juergen



      以下为原文

   
Thank you verry much. This post helped me.
regards Juergen

另一种工具投票：选项：嵌入式：BuoDooToots！新机器（所以“干净的构建”）…MPLABX，XC32，和声，XC16；它没有识别XC16。扫描建设工具“找到它，现在它是幸福的。



      以下为原文

    Another vote for Tools:Options:Embedded:BuildTools !
 
New machine (so "clean build")...MPLabX, XC32, Harmony, XC16; and it didn't recognize XC16.  "Scan for Build Tools" found it and now it is happy.