HelLoWo如何启动GPS模块

HI，许多GPS接收机模块将在NMEA 0183 ASCII文本行中发送消息。几乎每个PIC微控制器都有UART或USAT或EUSAT外设，能够接收这样的消息。注意，如果在GPS接收机上有USB或RS232输出，那么，附加的翻译或传输电路。在连接到PIC单片机输入引脚之前，需要用到其他的线程，请参阅相关的线程。您可以在PIDIP包上，在无焊板上进行PIC微控制器的实验。需要一个3或类似的程序员和调试器工具。或者您可以使用一个CURI。Tyror’s开发板，他们在同一块板上有一个“PIC工具包”，所以不需要单独的程序员。



      以下为原文

    Hi,
Many GPS receiver modules will send messages in NMEA 0183 ASCII text lines.
Nearly every  PIC microcontroller have UART or USART or EUSART peripheral,
that is able to receive such messages.
Note, that if there is USB or RS232 output on a GPS receiver,
then, additional translation or transciever circuits will be needed before connecting to PIC microcontroller input pin.
 
There have been other threads, see Related Threads. 
 
You may experiment with PIC microcontroller in PDIP package, on a solderless breadboard.
A PICkit 3, or similar programmer and debugger tool, will be needed.
 
Or you may use a 'Curiosity' development board, they have a 'Pic Kit On Board' built in on the same board, so a separate programmer is not needed.
 
Regards,
   Mysil