Web ISE 14.4更改重新编译得到不适合到期

我不知道是否有其他人经历过这个。
我下载/安装了WebISE 14.4。
一切似乎都正常工作......到了一定程度。
我对XC9572XL设计进行了更改（使用V14.4）然后尝试重新编译（我已经在V14.3中编译并且一直在使用该设备）我做了大约3次这样做并得到了关于不适合到期的相同消息
到“某些规格”。
我尝试使用V14.3重新编译没有任何问题。
所以，我回到了14.4并尝试了一次重新编译，所以我可以得到这个帖子的确切消息。
这次V14.4编译完美......很奇怪。
有人对此有任何见解吗？
在此先感谢您的帮助。
干杯....斯蒂芬



以下为原文

I don't know if anyone else has experienced this.

I downloaded/installed WebISE 14.4. Everything seems to work normally...to a point.  I made a change (using V14.4) to a XC9572XL design and then attempted to recompile (I had already compiled in V14.3 and have been using the device)   I did this about 3 times and got the same message about not fitting due to "certain specifications". I tried a recompile with V14.3 without any problems. So, I went back to 14.4 and tried one more recompile so I gcould get the exact message for this posting. This time V14.4 compiled perfectly......very odd.

Anyone have any insight on this?

  Thanks in advance for any help.

  Cheers....Steph