完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
你好,建议我选择合适的设备来产生185MHz时钟。谢谢您。我喜欢在1-36MHz范围内的单端输出和参考。
以上来自于百度翻译 以下为原文 Hello, advice me for selecting right device for generating 185MHz clocks? Thank you. I prefer single ended output and reference in range 1-36MHz |
|
相关推荐
3个回答
|
|
有CY22801(基于单个PLL的设备),可以考虑看,它有三个LVCMOS单端输出,范围从1到200 MHz(商业级)和1到166.6 MHz(工业级),从1到133 MHz的输入基准CKIN。CY22801数据表可在以下链接获得:HTTP://wwwyCysP.COM/?RID=13773,您可以使用CycCox软件创建JEDEC文件,该软件可以用来在CyPress或CyPress认证的第三方程序员的CY3672程序员的帮助下编程该设备。可以接近分配通道来编程设备。如果您需要更多的输出,请看下面的内容:CY22050—一个PLL通用闪存可编程时钟发生器数据表链接:HTTP://wwwyCysP.COM/?RID=13742 CY22150(带I2C)-一个PLL通用闪速可编程和2线串行可编程时钟发生器数据表链接:HTTP://wwwyCypC.com/?RID=13743
以上来自于百度翻译 以下为原文 There is CY22801 (single PLL based device) that can be considered looking at which has three LVCMOS single ended outputs ranging from 1 to 200 MHz (Commercial Grade) and 1 to 166.6 MHz (Industrial Grade) from input reference CLKIN ranging from 1 to 133 MHz. The CY22801 datasheet is available at the following link: http://www.cypress.com/?rID=13773 You can create a jedec file using the CyberClocks software that can be used to program the device with the help of CY3672 programmer from Cypress or any other Cypress certified third party programmer. The distribution channels can be approached for programming the devices. If you need more outputs, look at the following: CY22050 - One-PLL General Purpose Flash Programmable Clock Generator Datasheet Link: http://www.cypress.com/?rID=13742 CY22150 (with I2C) - One-PLL General-Purpose Flash-Programmable and 2-Wire Serially Programmable Clock Generator Datasheet Link: http://www.cypress.com/?rID=13743 |
|
|
|
先生,请让我知道使用PSoC的优势,而不是使用其他微控制器的光电传感器。
以上来自于百度翻译 以下为原文 Sir, please let me know what is the advantage of using PSoC rather then using other microcontroller for opto-electronic sensors. |
|
|
|
CyPress PSoC微处理器允许用户构建具有最少数量的外部组件的光学传感器,从而产生非常低成本的设备。微处理器和预留处理器的硬件和软件资源的存在允许将传感器部件与应用特定部件相结合,允许用户额外减少总系统成本并构建各种智能系统。
我们有一个关于传感多功能光学传感器的2042应用笔记,您可以检查有一个使用我们的CY8C2643设备的实现。这个应用笔记可以在我们的网站上找到:RID=2828 以上来自于百度翻译 以下为原文 Cypress PSoC microprocessor permits the user to build the optical sensor with the minimal number of external components, yielding a very low-cost device. The presence of microprocessor and reserved processor hardware and software resources allows combining sensor parts with application-specific parts that allows users to additionally reduce the total system cost and build various intelligence systems. We have our AN2042 application note on Sensing - Multifunctional Optical Sensor that you can check having an implementation using our CY8C27443 device. This application note is available on our website at: http://www.cypress.com/?rID=2828 |
|
|
|
只有小组成员才能发言,加入小组>>
718个成员聚集在这个小组
加入小组1910 浏览 1 评论
1665 浏览 1 评论
3418 浏览 1 评论
请问可以直接使用来自FX2LP固件的端点向主机FIFO写入数据吗?
1583 浏览 6 评论
1388 浏览 1 评论
CX3连接Camera修改分辨率之后,播放器无法播出camera的画面怎么解决?
208浏览 2评论
194浏览 2评论
使用stm32+cyw43438 wifi驱动whd,WHD驱动固件加载失败的原因?
339浏览 2评论
366浏览 1评论
76浏览 1评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-5-12 09:21 , Processed in 0.790459 second(s), Total 80, Slave 64 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号