[问答]

STM8AF52AATCY如何让控制器进入睡眠模式

问答对人有帮助，内容完整，我也想知道答案 0 尊敬的先生/女士，如何让控制器进入睡眠模式。您能否给我信息或发送给我任何源代码链接。在这里，我使用halt（）进入睡眠状态;禁用外围设备的模式，但我在想是否还有其他配置需要做。请建议我解决这个问题。以上来自于谷歌翻译以下为原文 Dear Sir/Madam, How to make controller goes into sleep mode. Can you please give me information or send me any source code link. Here, I am making into sleep using halt(); mode with disabling the peripherals but I'm thinking that Is there any other configuration need to do. Kindly, suggest me to solve this issue. 0
2019-1-7 16:14:13　　评论淘帖0 邀请回答您可以邀请以下用户，快速回答问题 × wang21cj 该类别下有 44 个回答。邀请回答新星之火12138 该类别下有 41 个回答。邀请回答 chm5 该类别下有 39 个回答。邀请回答 hgimtk 该类别下有 33 个回答。邀请回答 HengDu 该类别下有 30 个回答。邀请回答 hwp0415229 该类别下有 28 个回答。邀请回答 jghgfdssas 该类别下有 28 个回答。邀请回答 kingnet6688 该类别下有 26 个回答。邀请回答颜刚YanG 该类别下有 26 个回答。邀请回答可口可甜该类别下有 26 个回答。邀请回答柱子图宁该类别下有 25 个回答。邀请回答 jenny042 该类别下有 25 个回答。邀请回答 kingnet9999 该类别下有 25 个回答。邀请回答 andyfly7 该类别下有 25 个回答。邀请回答麻酱该类别下有 25 个回答。邀请回答 zyh34997 该类别下有 25 个回答。邀请回答哼小曲该类别下有 24 个回答。邀请回答云汉007 该类别下有 24 个回答。邀请回答 ggfvxv 该类别下有 24 个回答。邀请回答 heks 该类别下有 24 个回答。邀请回答举报 h1654155275.5994 相关推荐 • 如何让NY8A054D进入睡眠模式？ 1718 • 如和让STM8S与STM8L安全地进入睡眠状态呢？ 307 • 请问进入睡眠模式是否会停止STM32CubeMX中的通用定时器？ 216 • cc2650如何在使能串口同时，让设备进入睡眠模式？ 3075 • STM32L071CB如何让MCU进入睡眠状态呢？又是如何唤醒它的呢？ 408 • CH32F103C8T6进入睡眠模式无法烧录如何解决？ 481 • AVR单片机电源管理是如何进入睡眠模式的 931 • M261芯片如何进入睡眠和深度睡眠模式，以及如何退出来？有没有C语言参考？ 265 • 如何让I2C在深度睡眠模式下工作？ 3258 • 程序进入睡眠模式设置了定时器中断为什么不能唤醒睡眠？ 249 1个回答

答案对人有帮助，有参考价值 0 尊敬的先生/女士，现在我完全停止了控制器。但是当它处于暂停模式时，如果触发任何GPIO外部中断意味着它会唤醒，但是当我发送CAN标识符时，它就不会被唤醒。按照暂停模式下的数据表，如果CAN_RX中断到来，它应该被唤醒。那么，在进入暂停模式之前，能否指导一下我需要为CAN配置什么初始化。在这里我添加了CAN_Config（）;功能。 void CAN_Config（void） { CAN_InitStatus_TypeDef status = CAN_InitStatus_Failed; / 过滤参数 / CAN_FilterNumber_TypeDef CAN_FilterNumber; FunctionalState CAN_FilterActivation; CAN_FilterMode_TypeDef CAN_FilterMode; CAN_FilterScale_TypeDef CAN_FilterScale; uint8_t CAN_FilterID1; uint8_t CAN_FilterID2; uint8_t CAN_FilterID3; uint8_t CAN_FilterID4; uint8_t CAN_FilterIDMask1; uint8_t CAN_FilterIDMask2; uint8_t CAN_FilterIDMask3; uint8_t CAN_FilterIDMask4; / * Init参数* / CAN_MasterCtrl_TypeDef CAN_MasterCtrl; CAN_Mode_TypeDef CAN_Mode; CAN_SynJumpWidth_TypeDef CAN_SynJumpWidth; CAN_BitSeg1_TypeDef CAN_BitSeg1; CAN_BitSeg2_TypeDef CAN_BitSeg2; uint8_t CAN_Prescaler; / * CAN注册init * / CAN_DeInit（）; / * CAN init * / CAN_MasterCtrl = CAN_MasterCtrl_AllEnabled; // CAN环回模式JNa // CAN_Mode = CAN_Mode_LoopBack; CAN_Mode = CAN_Mode_Normal; / * CAN_SynJumpWidth = CAN_SynJumpWidth_1TimeQuantum; CAN_BitSeg1 = CAN_BitSeg1_5TimeQuantum; CAN_BitSeg2 = CAN_BitSeg2_2TimeQuantum; CAN_Prescaler = 4; * / CAN_SynJumpWidth = CAN_SynJumpWidth_1TimeQuantum; CAN_BitSeg1 = CAN_BitSeg1_8TimeQuantum; CAN_BitSeg2 = CAN_BitSeg2_7TimeQuantum; CAN_Prescaler = 8; / * 500kbit / s * / status = CAN_Init（CAN_MasterCtrl，CAN_Mode，CAN_SynJumpWidth，CAN_BitSeg1， CAN_BitSeg2，CAN_Prescaler）; / * CAN过滤初始化* / CAN_FilterNumber = CAN_FilterNumber_0; CAN_FilterActivation = ENABLE; CAN_FilterMode = CAN_FilterMode_IdMask; CAN_FilterScale = CAN_FilterScale_32Bit; CAN_FilterID1 = 0; CAN_FilterID2 = 0; CAN_FilterID3 = 0; CAN_FilterID4 = 0; CAN_FilterIDMask1 = 0; CAN_FilterIDMask2 = 0; CAN_FilterIDMask3 = 0; CAN_FilterIDMask4 = 0; CAN_FilterInit（CAN_FilterNumber，CAN_FilterActivation，CAN_FilterMode， CAN_FilterScale，CAN_FilterID1，CAN_FilterID2，CAN_FilterID3， CAN_FilterID4，CAN_FilterIDMask1，CAN_FilterIDMask2， CAN_FilterIDMask3，CAN_FilterIDMask4）; / 启用Fifo消息等待中断 / / 消息接收由CAN_RX ISR /完成 CAN_ITConfig（CAN_IT_FMP，ENABLE）; 在这里，我怀疑我的配置，需要改变什么配置。以上来自于谷歌翻译以下为原文 Dear Sir/Madam, Now I did controller into halt completely. But when it's in halt mode if any GPIO external interrupt is triggered means it wakes up, but when I will send the CAN Identifier then It's not waking up. As per data sheet in halt mode if CAN_RX interrupt comes it should wake up. So, can you please guide to me what initialization I need configure for CAN before entering into the halt mode. Here I added CAN_Config(); function. void CAN_Config(void) { CAN_InitStatus_TypeDef status = CAN_InitStatus_Failed; /* Filter Parameters / CAN_FilterNumber_TypeDef CAN_FilterNumber; FunctionalState CAN_FilterActivation; CAN_FilterMode_TypeDef CAN_FilterMode; CAN_FilterScale_TypeDef CAN_FilterScale; uint8_t CAN_FilterID1; uint8_t CAN_FilterID2; uint8_t CAN_FilterID3; uint8_t CAN_FilterID4; uint8_t CAN_FilterIDMask1; uint8_t CAN_FilterIDMask2; uint8_t CAN_FilterIDMask3; uint8_t CAN_FilterIDMask4; / Init Parameters/ CAN_MasterCtrl_TypeDef CAN_MasterCtrl; CAN_Mode_TypeDef CAN_Mode; CAN_SynJumpWidth_TypeDef CAN_SynJumpWidth; CAN_BitSeg1_TypeDef CAN_BitSeg1; CAN_BitSeg2_TypeDef CAN_BitSeg2; uint8_t CAN_Prescaler; / CAN register init / CAN_DeInit(); / CAN init / CAN_MasterCtrl=CAN_MasterCtrl_AllEnabled; //CAN Loop Back Mode JNa //CAN_Mode = CAN_Mode_LoopBack; CAN_Mode = CAN_Mode_Normal; /CAN_SynJumpWidth = CAN_SynJumpWidth_1TimeQuantum; CAN_BitSeg1 = CAN_BitSeg1_5TimeQuantum; CAN_BitSeg2 = CAN_BitSeg2_2TimeQuantum; CAN_Prescaler = 4;/ CAN_SynJumpWidth = CAN_SynJumpWidth_1TimeQuantum; CAN_BitSeg1 = CAN_BitSeg1_8TimeQuantum; CAN_BitSeg2 = CAN_BitSeg2_7TimeQuantum; CAN_Prescaler = 8; / 500kbit/s / status = CAN_Init(CAN_MasterCtrl, CAN_Mode, CAN_SynJumpWidth, CAN_BitSeg1, CAN_BitSeg2, CAN_Prescaler); / CAN filter init / CAN_FilterNumber = CAN_FilterNumber_0; CAN_FilterActivation = ENABLE; CAN_FilterMode = CAN_FilterMode_IdMask; CAN_FilterScale = CAN_FilterScale_32Bit; CAN_FilterID1=0; CAN_FilterID2=0; CAN_FilterID3=0; CAN_FilterID4=0; CAN_FilterIDMask1=0; CAN_FilterIDMask2=0; CAN_FilterIDMask3=0; CAN_FilterIDMask4=0; CAN_FilterInit(CAN_FilterNumber, CAN_FilterActivation, CAN_FilterMode, CAN_FilterScale,CAN_FilterID1, CAN_FilterID2, CAN_FilterID3, CAN_FilterID4,CAN_FilterIDMask1, CAN_FilterIDMask2, CAN_FilterIDMask3, CAN_FilterIDMask4); / Enable Fifo message pending interrupt/ / Message reception is done by CAN_RX ISR*/ CAN_ITConfig(CAN_IT_FMP, ENABLE); }Here, I am suspecting about my configuration, what configuration need to be change.

2019-1-7 16:34:08 评论举报 h1654155275.5994