完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
您好我使用HP4155A进行直流扫描测量时遇到问题。
我设置了2个电压输入,扫描顺序为1& 2,1个电压输入在我的ic-cap设置中保持不变。 但是当我开始测量时,4155A没有将2个SMU设置为VAR1 / VAR2并且出现错误代码“ERROR 180:非法设置,目标模块未安装”我以前的ic-cap版本是2006B而我从未有过 用同样的仪器这个问题。 任何建议将不胜感激,谢谢。 以上来自于谷歌翻译 以下为原文 Hello I got a problem when I used a HP4155A to do some DC sweep measurement. I set up 2 voltage inputs with sweep-order 1 & 2 ,and 1 voltage input as constant in my ic-cap setups. But when I started measurement ,the 4155A didn't set 2 SMUs as VAR1/VAR2 and an error code popped up " ERROR 180 : illegal setup , target module is not installed" My previous version of ic-cap is 2006B and I never had this problem with the same instrument. Any suggestion will be appreciated, thank you. |
|
相关推荐
3个回答
|
|
我目前的IC-CAP版本是2013.01。
谢谢。 以上来自于谷歌翻译 以下为原文 And my current version of IC-CAP is 2013.01. Thank you. |
|
|
|
你好Jackos,这听起来像是一个非常合理的测量,应该没有错误,但我们不能仅仅从那个描述中诊断它。
我建议联系eesof_support@agilent.com并将* .mdl文件与您的设置以及* .hdw文件一起发送(执行文件>保存硬件窗口)。 要检查的内容是设置输入和输出中的SMU单元名称。 确保在安装程序中引用的内容与硬件窗口中4155的单元名称相匹配。 例如 转到硬件窗口,选择4155并单击配置以检查单元名称。还要检查SMU类型。 如果您没有看到问题,最好将问题发送到eesof_support@agilent.com(带* .mdl和* .hdw),然后我们将很乐意进一步检查。 最好的问候,其他 以上来自于谷歌翻译 以下为原文 Hello Jackos, That sounds like a very reasonable measurement to be doing and should run without that error, but we cannot diagnose it just from that description. I suggest to contact eesof_support@agilent.com and send the *.mdl file with your setup, as well as the *.hdw file (do File > Save off the Hardware window). The things to check would be the SMU Unit Names in the Setup Inputs and Outputs. Make sure what you refer to in the Setup matches your Unit Names for the 4155 in the Hardware window. e.g. Go to Hardware Window, select the 4155 and click on Configure to check the Unit Names.Also check the SMU types. If you do not see a problem by doing that, the best would be to send the problem to eesof_support@agilent.com (with *.mdl and *.hdw) and then we will be happy to check into it further. Best regards, Else |
|
|
|
victorlekwk 发表于 2018-12-11 15:16 Jackos,您可能希望检查的另一件事是确保您拥有最新版本的ICCAP 2013.01,它是#4的修补程序。 它可以在ICCAP的下载站点获得。 它可能对这个特定问题没有什么影响,但总的来说,使用所有修补程序运行最新代码可能会很好。最好的问候Else 以上来自于谷歌翻译 以下为原文 Jackos, One more thing, you may wish to check, is to make sure you have the most current version of ICCAP 2013.01, which is hotfix #4. It is available at the download site for ICCAP. It may not make a difference for this particular issue, but in general, it can be good to run the most recent code with all hotfixes.. Best regards Else |
|
|
|
只有小组成员才能发言,加入小组>>
1223 浏览 0 评论
2347 浏览 1 评论
2157 浏览 1 评论
2022 浏览 5 评论
2902 浏览 3 评论
965浏览 1评论
关于Keysight x1149 Boundary Scan Analyzer
701浏览 0评论
N5230C用“CALC:MARK:BWID?”获取Bwid,Cent,Q,Loss失败,请问大佬们怎么解决呀
801浏览 0评论
1224浏览 0评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-11-23 11:02 , Processed in 1.560023 second(s), Total 81, Slave 65 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号