是否可以将多个网络连接到X540

您好Dscobey，感谢您在英特尔有线以太网社区发帖。
是否在将由两个网络访问的服务器上配置X540适配器？
什么是X540连接，每个适配器端口的不同开关？
他们是否还有一个具有NAT和WAN访问权限的路由器？
每个网络的IP地址范围是否不同？
这可能是一种可行的方案，但服务器一次只能通过一个网络上的一个默认网关访问Internet。
每个端口都将配置在该网络的地址范围内。
不是默认网关的路由器将需要到另一网络上的服务器的静态路由。
这主要取决于您的需求和网络配置。
请提供更多细节。
如有任何其他问题，请随时与我们联系。最好的问候，丹尼尔D.



以下为原文

Hello Dscobey,

Thank you for posting in Intel Wired Ethernet Communities.  Is the X540 adapter being configured on a server that will be accessed by both networks?  What is the X540 being connected to, a different switch for each adapter port?  Will they also have a router with NAT and WAN access?  Are the IP address ranges for each network different?  This may be a scenario that can work, but the server will only have access to the Internet through one default gateway on one network at a time.  Each port will be configured within the address range of that network.  The router that is not the default gateway will require a static route to the server on the other network.  This will mostly depend on your needs, and network configurations.  Kindly provide more detail.  Please do not hesitate to contact us with any other questions.

Best regards,
Daniel D

谢谢你的回答，我将尝试提供更多细节：
目前，网络A是公司的内部网络，不允许来自网络外部的入站连接，包含X540的服务器被修补到网络A的交换机中。
网络B将连接到商业ISP，服务器将从X540的端口2修补到ISP交换机。
网络B将允许入站连接。
每个网络上的IP空间都不同，不允许在X540的端口之间进行路由。
X540上的每个端口都将配置为插入的网络所需的IP设置。
不使用DHCP，仅使用静态IP。
两个网络都需要访问互联网。
如果你有更多问题请问，我知道我可能会遗漏一些东西。
大卫



以下为原文

Thanks for the answer, I will try to provide a little more detail:
 
Currently network A is the internal network for the company and does not allow inbound connections from outside the network, the server containing the X540 is patched into the switch for network A.
Network B will be connected to a commercial ISP and the server will be patched into the ISP switch from port 2 of the X540. Inbound connections will be allowed on Network B.
The IP space will be different on each network and should not allow routing between the ports of the X540.
Each port on the X540 will be configured with the required IP settings for the network that it is plugged into.
No DHCP will be used, static IPs only.  Both networks will need to access the internet.
 
If you have more questions please ask, I know I'm probably leaving something out.
 
David

你好Dscobey，谢谢你的回复。
根据网络配置，这可以通过VLAN实现。
您是否已使用X540-T2在服务器上运行高级网络服务？
X540-T2将能够使用VLAN将流量路由到网络A或从网络A路由到网络B上的路由器以及ISP以便在两个网络上进行Internet访问。
要在X540-T2之外实施，请咨询网络管理员。
如果您有任何疑问，请不要犹豫。最好的问候，丹尼尔D.



以下为原文

Hello Dscobey,

Thank you for the reply.  Depending on the network configuration, this may be achievable with VLANs.  Are you already running Advanced Network Services on the server with the X540-T2?  The X540-T2 would be able to use VLANs to route traffic to/from Network A to the Router on network B and the ISP for Internet access on both networks.  For implementation beyond the X540-T2 please check with a network administrator.  If you have any questions please do not hesitate to ask. 

Best regards,
Daniel D 

你好Dscobey，希望你发现这些建议很有帮助。
如果您有任何问题，请告诉我们。最好的问候，丹尼尔D.



以下为原文

Hello Dscobey,

Hope you found the advice helpful.  Please let us know if you have any questions.  

Best regards,
Daniel D

您好Dscobey，如果您需要任何其他帮助，请不要犹豫与我们联系。最好的问候，丹尼尔D.



以下为原文

Hello Dscobey,

If you need any other assistance please do not hesitate to contact us.

Best regards,
Daniel D

你好Dscobey，澄清两个网络之间不会发生路由。
服务器上没有网关或路由来传递流量，每个网络都有不同的IP子网。最好的问候，丹尼尔D



以下为原文

Hello Dscobey,

To clarify no routing will occur between the two networks.  There is no gateway or routing on the server to pass the traffic, and each network will have a different IP subnet.

Best regards,
Daniel D