无法将PICKit3设置为Project Debugger

嗨，来调试我的一个项目，从1月1日起开始工作。注意到模拟器已经在配置中被选中了（我没有这样做），去改变它使用PICtiT3，“OK”和“应用”按钮都变灰了（见图）。我已经尝试了三个差异PICKits，并且给出了相同的结果。通过MPLABX清楚地识别了PACKIT3，这意味着Windows对HID很满意。我唯一能想到的是，自从上次使用调试器以来，至少有一个Win 10升级和Java升级。有没有其他人有这个问题，更重要的是设法解决它？我将重新安装MPLABX，看看这是否有帮助……系统是：MPLABX 4.05，XC16 1.24，Win 10。



      以下为原文

    Hi,
Came to debug a project of mine that was working fine beginning of Jan.  Noticed that the Simulator had been selected in the Configuration (I hadn't done this), went to change it to use the PICKit3 and the "Ok" and "Apply" buttons are greyed out (see picture).  I've tried three difference PICKits and all give the same result. The PICKit3 is clearly identified by MPLABX, which I assume means that Windows is happy with the HID.

The only thing I can think is that there have been at least one Win 10 upgrade and also a Java upgrade since I last used the debugger.  Has anyone else had this issue and more importantly managed to resolve it?

I will re-install MPLABX to see if this helps...

System is: MPLABX 4.05, XC16 1.24, Win 10.


   Attached Image(s)