U4301A是否支持ASPM L1子状态L1.1和L1.2跟踪？

我正在检查以验证这一点，但是从帮助系统：“除了配置和恢复状态，子状态不会显示任何其他状态。例如，轮询的子状态，如Polling.Active，Polling.Compliance和
不显示Polling.Configuration。窗格中仅列出轮询状态。“
我怀疑原因是从捕获的数据推断出当前的状态和子状态，可能无法可靠地确定其他子状态。
免责声明：为了获得更可靠的响应，您应该考虑致电当地的Keysight技术呼叫中心。
Keysight论坛在“可用”的基础上进行监控，并不一定是解决技术问题的最快方式。



     以下为原文

  I'm checking to verify this, but from the Help system:

"Except for the Configuration and Recovery states, the substates are not displayed for any other state. For instance, the substates of Polling such as Polling.Active, Polling.Compliance and Polling.Configuration are not displayed. Only the Polling state is listed in the pane."

I suspect that the reason is that the current state and substate are inferred from the captured data, it may not be possible to determine other substates reliably.

Al

Disclaimer: For more reliable response, you should consider calling your local Keysight Technical Call Center. The Keysight Forums are monitored on an "as available" basis, and aren't necessarily the fastest way to get technical questions answered.