好奇心HPC和PIC18F26K83不能通过USB连接器程序的设备

大家好，我有一个好奇心的HPC和一个PIC18F26K83.MPLAB X 4.10和XC8版本1.45。我不能通过USB连接器程序的设备，因为我得到了错误：程序员不能启动：无法连接到工具硬件：PKOBSKEDPPLAMFIRTOOL，COM.MICCHIP.MPLAB.MdCORC.PKKOBSKDE.PKOBSKDEBGBoToMoCurror，虽然微控制器PaPCeLaRLY将好奇心HPC调用作为支持的调试器/DEV环境，MPLAB发行说明也这样做，我甚至无法连接到设备。有没有人知道PIC18F26K823何时会被支持通过好奇HPC（PKOB）进行调试？最后我用了一个ICD3连接到一些没有标记的垫子上，我不得不蜂拥而至，以便编程/开发这个东西。我知道Microchip支持大量的设备，但是他们推荐的DeV板甚至没有像广告那样工作。对这个板和芯片的开始支持日期有什么想法吗？



      以下为原文

    Hi all,

I have a curiosity HPC and a PIC18F26K83. MPLAB X 4.10 and XC8 version 1.45.
I cannot through the USB connector program the device, as I get the error:

The programmer could not be started: Could not connect to tool hardware: PKOBSKDEPlatformTool, com.microchip.mplab.mdbcore.pkobskde.PKOBSKDEDbgToolManager

Although the microcontroller page clearly calls out the Curiosity HPC as a debugger/dev environment that is supported, and MPLAB release notes do as well, I cannot even connect to the device. Does anybody know when PIC18F26K83 will be supported to be debugged via the Curiosity HPC (PKOB)? I ended up using a ICD3 connected to some unmarked pads which I had to buzz-out in order to program/develop the thing. I understand Microchip supports a vast amount of devices, but - the dev board they recommend doesn't even work as advertised. Any idea of a begin support date for this board and chip?