完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
所有,我有5个产品与PIC32 MX270所有他们使用I2C,我没有任何问题与那些。我有一个新产品与24AA02,我正在使用的序列号和EEPROM的变量。我有最坏的时间与这件事。在SDA引脚,我可以切换,无论作为输出。一旦我启用I2C1,该引脚低,并停留在那里。我使用2K2拉升到3V3。如果我把SDA/SCL设置为输入,SDA引脚保持低。这是I2C总线上唯一的设备。有人有什么想法吗?谢谢,戈登
以上来自于百度翻译 以下为原文 All, I have 5 products with the PIC32MX270 all of them use I2C and I don't have any issues with those. I have a new product with a 24AA02 that I am using for a serial number and EEPROM for variables. I am having the worst time with this thing. On the SDA pin I can toggle that whatever as an output. As soon as I enable the I2C1, that pin goes low and stays there. I am using 2K2 pull ups to 3V3. If I set the SDA/SCL to inputs the SDA pin is held low. This is the only device on the I2C buss. Anyone have any ideas? Thanks, Gordon |
|
相关推荐
1个回答
|
|
所有,抱歉浪费的带宽…这是一个坏的部分。焊接在一个新的,它的工作。谢谢,戈登
以上来自于百度翻译 以下为原文 All, Sorry for the wasted bandwidth... it was a bad part. Soldered in a new one and it's working. Thanks, Gordon |
|
|
|
只有小组成员才能发言,加入小组>>
4986 浏览 9 评论
1904 浏览 8 评论
1837 浏览 10 评论
请问是否能把一个ADC值转换成两个字节用来设置PWM占空比?
3052 浏览 3 评论
请问电源和晶体值之间有什么关系吗?PIC在正常条件下运行4MHz需要多少电压?
2131 浏览 5 评论
560浏览 1评论
408浏览 1评论
PIC Kit3出现目标设备ID(00000000)与预期的设备ID(02c20000)不匹配。是什么原因
461浏览 0评论
352浏览 0评论
IPECMD命令烧录AVR128DA48芯片,报找不到芯片错误
837浏览 0评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-8-9 03:10 , Processed in 1.133527 second(s), Total 78, Slave 61 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号