英特尔NUC D54250WYK POST错误不再发生

你好，
我在我的NUC上运行Libreelec用于HTPC但是厌倦了我遇到的无数问题。
因此，我决定将操作系统更改为Windows 10.我将Windows 10媒体创建器下载到USB，并尝试在创建USB记忆棒后更改NUC上的操作系统。
在安装期间，WIndows不喜欢我的分区，所以我删除了所有分区并有一个未分配的块。
Windows然后安装并完成安装。
自动重启后，启动永远不会超过英特尔NUC屏幕上的F2，F7，F10选项。
所以30分钟左右后，我手动重启了NUC。
此时我遇到了POST错误，无法对NUC做任何事情。
如果我的回答是肯定的，那么NUC就会变得没有反应。
如果我回答否，那么NUC将进入NUC屏幕而不是继续。
我最终能够通过移除跳线来进行bios恢复。
bios恢复工作，我有最新的BIOS。
POST错误不再发生。
但是，我仍然无法启动NUC屏幕。
我无法通过F2进入BIOS。
我唯一可以工作的是没有跳线的完整BIOS恢复。
那里有解决方案吗？
我的下一个解决方案是看看我能投入多大程度的NUC。
谢谢，
布赖恩



以下为原文

Hello,
I was running Libreelec for a HTPC on my NUC but grew tired of the myriad of issues I was having. So I decided to change OS to Windows 10. I downloaded Windows 10 media creator to a USB and attempted to change my OS on the NUC after creating the USB stick. During the install WIndows did not like my partitioning, so I deleted all of the partitions and had one unallocated block. Windows then installed and completed the install. Upon auto reboot, the boot never got past the Intel NUC screen with the F2, F7, F10 options on it. So after 30 minutes or so, I manually rebooted the NUC.

At this point I ran into the POST error and could not do anything with the NUC. If I answered yes, the NUC would become unresponsive. If I answered no, the NUC would go to the NUC screen and not continue. I was eventually able to do a bios recovery via removing the jumper. The bios recovery worked and I have the latest BIOS. The POST error does not occur any longer.

However, I am still unable to boot past the NUC screen. I am not able to get into the BIOS via F2. The only thing I can get to work is a full BIOS recovery without the jumper.

Is there any solutions out there? My next solution is to see how far I can throw a NUC.

Thanks,

Brian