XC8 Bug报告PIC18LF67K40

不知道在哪里报告bug，我发现任何链接都被破坏了，搜索没有得到任何结果。在PIC18（L）F67 K40.CFGDATA文件中有一个与用户ID内存格式有关的错误。ISCWORD：200000：FFF:IDOLC0cWord：200002：FFF:IDOLC1cWord：200004：FFF：IDFROC2CWOR: 200006：FFF:IDFROC3CWord：200008：FFF:IDFROC4CWE:FOF:IDORC5cWor:20000：FFF：IDROC6CWE:20000：EFF:FFF:IDROC7，它不允许正确的用户ID位置设置（3个字节，然后0），它应该是：200000：FF:IDOLC0cWord：200001：FF:IDOLC1CWORD：200002：FF:FIDROC2CWOR:200003：FF:FF:IDROC3CWORD：20000FF：IDLog4CWord：200005：FF:IDROC5CWOR:FF:IDROC7CWOR:FF:IDROC8CWOR:FIF:900：A: FF:IDOLC10cWord：FF:FF:IDRO1111CWord：FF:FF:IDLoC12CWOR:20000：FF:IdLoC13CWOR:20000：EF:FF:IDROC14CWOR:FUF:FF:IDROC15: 4：FF:允许在数据表中访问所有位置作为字节数据



      以下为原文

    Not sure where to report bugs, any link I found is broken, search does not get me any results.

There is a bug in the PIC18(L)F67K40.cfgdata file to do with USER ID memory format.
IS
CWORD:200000:FFF:FFF:IDLOC0
CWORD:200002:FFF:FFF:IDLOC1
CWORD:200004:FFF:FFF:IDLOC2
CWORD:200006:FFF:FFF:IDLOC3
CWORD:200008:FFF:FFF:IDLOC4
CWORD:20000A:FFF:FFF:IDLOC5
CWORD:20000C:FFF:FFF:IDLOC6
CWORD:20000E:FFF:FFF:IDLOC7
Which Does not allow proper USER ID Location setting (3 nibbles then 0)

It should be

CWORD:200000:FF:FF:IDLOC0
CWORD:200001:FF:FF:IDLOC1
CWORD:200002:FF:FF:IDLOC2
CWORD:200003:FF:FF:IDLOC3
CWORD:200004:FF:FF:IDLOC4
CWORD:200005:FF:FF:IDLOC5
CWORD:200006:FF:FF:IDLOC6
CWORD:200007:FF:FF:IDLOC7
CWORD:200008:FF:FF:IDLOC8
CWORD:200009:FF:FF:IDLOC9
CWORD:20000A:FF:FF:IDLOC10
CWORD:20000B:FF:FF:IDLOC11
CWORD:20000C:FF:FF:IDLOC12
CWORD:20000D:FF:FF:IDLOC13
CWORD:20000E:FF:FF:IDLOC14
CWORD:20000F:FF:FF:IDLOC15

This allows access to all locations as BYTE data as spec'ed in the datasheet