完善资料让更多小伙伴认识你，还能领取20积分哦， 立即完善>
3天内不再提示
电子发烧友论坛|
大家好，我有点迷惑的容易的引导加载程序，这里是：http://WW1.Microchip .com /下载/ En/ActualStudio /Microchip %20Eclipse %20Bootloader /EZBL%20%发布%20Notts。HTME注释提到了各种各样的DSPIC33 FJXXXMCX06/X08/X10部分，但没有DSSPIC33 FJ32 MC304。EZBL是否期望与此部分一起工作？此外，Notes还指出如下：“注意：这些器件是由PIC24HJXXXGPX06A/X08A/X10A、DSPIC33 FJXXXGPX06A/X08A/X10A和DSPIC33 FJXXXMCX06A/X08A/X10A系列取代的成熟产品。这些连续的家庭有更少的勘误表，提供更高的温度选择，并得到EZBL的支持。“我找不到任何地方的“DSIC33 FJ32 MC304A”部件。这个MEANDSPIC3FJ32 MC304不受上述勘误表和发行通知的影响吗？谢谢
以上来自于百度翻译 以下为原文 Hi all, I'm a bit confused by release notes for the Easy Bootloader, here: http://ww1.microchip.com/downloa ... release%20notes.htm The notes mention a variety of dsPIC33FJXXXMCX06/X08/X10 parts but not dsPIC33FJ32MC304. Is the EZBL expected to work with this part? Also the notes state the following: "Note: these devices are mature products superseded by the PIC24HJXXXGPX06A/X08A/X10A, dsPIC33FJXXXGPX06A/X08A/X10A and dsPIC33FJXXXMCX06A/X08A/X10A families. These successive families have fewer errata, offer higher temperature options and are supported by EZBL." I could not find a "dsPIC33FJ32MC304A" part anywhere. Does this mean dsPIC33FJ32MC304 is not affected by the above erratum and release note? Thanks 
0
|
|
相关推荐
5个回答
|
|
|
EZBL微芯片是最新的吗？或者现在是MCC Bootloader。他们倾向于不向新的RAID工具添加旧的图片。如果它不在那里，那就不太可能了，但这并不意味着你不能为你的照片做一个引导。你需要一张旧的申请表。或者，你可以在新工具中为类似的PIC构建BooLoter，然后修改以供选择。
以上来自于百度翻译 以下为原文 Is EZBL Microchips latest? Or is it MCC Bootloader now. They tend not to add older PICs to the New RAID Tools. SO if it is not there, it is not likely to be. But that does not mean you can not make a Bootloder for your PIC. You would need either the old Application Note. Or, You can Build a Bootloder for a similar PIC in the Newer tools, then modify for you PICK. |
|
|
|
|
|
嗨，EZBL上次更新是在04 / 2017，所以它是最新的：http://WW1.Microchip .com /下载/ En/ActualStudio / Microchip %20Eclipse %20BooToule/EZBL%20%发布%20Notes。HTM*Y.WHESWHESWONNEWALL 16位设备应该工作，但是它们没有在发布说明（第4节）中提到的隐含测试。3）：http://WW1.Microchip .com／下载/ En/ActualStudio／Microchip %20Eclipse %20BooToule/EZBL%20发行%No.No.S.
以上来自于百度翻译 以下为原文 Hi, EZBL last update was in 04/2017 so it is quite up to date : http://ww1.microchip.com/downloads/en//softwarelibrary/microchip%20easy%20bootloader/ezbl%20release%20notes.htm#_whats_new All 16 bits devices should work but they have not been implicitely tested as mentioned in release notes (section 4.3) : http://ww1.microchip.com/downloads/en//softwarelibrary/microchip%20easy%20bootloader/ezbl%20release%20notes.htm#_whats_new Regards |
|
|
|
|
|
感谢NKurzman和RISC为您的输入。有趣的是，上述发布说明显示了10月2017日，所以看起来EZBL甚至比上次的想法更为新近。我还不知道还有一个MCC Bootloader。比较一下，看看它们之间有什么区别是很有趣的。
以上来自于百度翻译 以下为原文 Thanks @NKurzman and @RISC for your input. Interestingly the above-mentioned release notes show October 2017 as the date, so it seems EZBL is even more up-to-date than last thought. I was not aware that there is a MCC Bootloader as well. It should be interesting to compare and see if there is any difference between them. |
|
|
|
|
|
只是为了更新这个线程：看来MCC根本不支持这个MCU家族？当我试图在一个新的空白DSPIC33 FJ32 MC304项目上调用MCC时，它试图加载，然后产生一个不支持这个部分的错误。这是MPLAB X IDE V4.15和MCC 3.55.1。我还安装了PIC24DSPIC33-PIC32 MM－1.5 4.JAR（假设我做的正确）。不确定我是否应该尝试进一步诊断——“我所需要的是一个引导加载程序”，如果上传中断或损坏，希望不会阻碍设备。
以上来自于百度翻译 以下为原文 Just to update this thread: It appears MCC does not support this MCU family at all? When I tried to invoke MCC on a new blank dsPIC33FJ32MC304 project, it attempted to load, then produced an error that this part is not supported. This was with MPLAB X IDE v4.15 and MCC 3.55.1. I also installed pic24-dspic33-pic32mm-1.54.jar (assuming I did that correctly). Not sure if I should try to diagnose this further -- "all I wanted was a bootloader" that hopefully doesn't brick the device if the upload is interrupted or corrupt. |
|
|
|
|
|
嗨，MCC支持“最近的”图片，我猜到6/7年前。我认为旧的照片也不会被支持，因为许多10/15 / 20岁的照片；（=）dSPIC33 FJ是一个“相对”的老家族（大约10年前开始），3年后引入了DSPIC33 EP。我猜想MCC只支持DSPIC33 EP。对于大多数的DSPIC33 FJ设备来说，它们可能是等效的DSPIC33 EP。它们更便宜，更强大，并且消耗更少的电流。EZBL是最好的选择，但是你只需要适应它（有各种各样的“闪存”的写架构/算法）到你的设备。
以上来自于百度翻译 以下为原文 Hi, MCC supports "recent" PICs I guess up to 6/7 years ago. I guess older ones won't be supported as also many of the 10/15/20 years old PICs ;=) dsPIC33FJ is a "relatively" old family (started about 10 years ago) and 3 years later dsPIC33EP was introduced. I guess MCC supports only dsPIC33EP as there are probably equivalents dsPIC33EP for most dsPIC33FJ devices.and they are cheaper, more powerful and consume much less current. EZBL is the best option but you'll just need to adapt it (there are various "Flash" write architectures / algorithms) to your device. Regards |
|
|
|
|
只有小组成员才能发言，加入小组>>
5234 浏览 9 评论
2026 浏览 8 评论
1950 浏览 10 评论
请问是否能把一个ADC值转换成两个字节用来设置PWM占空比？
3201 浏览 3 评论
请问电源和晶体值之间有什么关系吗？PIC在正常条件下运行4MHz需要多少电压？
2253 浏览 5 评论
771浏览 1评论
659浏览 1评论
有偿咨询，关于MPLAB X IPE烧录PIC32MX所遇到的问题
588浏览 1评论
PIC Kit3出现目标设备ID(00000000)与预期的设备ID(02c20000)不匹配。是什么原因
670浏览 0评论
571浏览 0评论
/6 
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 （电路图） 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证：合字B2-20210191
工商网监
湘ICP备2023018690号
1475
评论
淘帖
1433
