[问答]

安装4.15之后很多项目都出现了奇怪的错误

问答对人有帮助，内容完整，我也想知道答案 0 由于某种原因，当我试图回答我以前发布的线程时，我得到了一个权限错误，所以我继续在这里。D：是本地驱动器，它是我所有数据驻留的地方，这是通过许多版本的微芯片软件工作多年的。我知道我“不应该”卸载任何东西，3.65个配置“应该”不受影响。然而，情况并非如此，所以现在我试图恢复我的环境。我把整个开发文件夹从我的笔记本电脑上成功地编译了，当我尝试编译时它崩溃了。现在用这台机器3.65。大约一周前，在我加载4.15之前，我编译了相同的代码，没有问题。毫无疑问，装载4.15的东西会破坏环境。以上来自于百度翻译以下为原文 For some reason, when I try to reply to my previously posted thread, I get a permissions error, so I continued it here. D: is a local drive, it's where all my data resides, that's worked for years through many versions of the Microchip software. I know I "shouldn't" have to uninstall anything, and the 3.65 configuration "should" have been unaffected. However, that's not the case, so now I'm trying to recover my environment. I moved the entire development folder from my laptop where it compiles successfully, and it crashes when I try to compile it with 3.65 now on this machine. About a week ago, before I loaded 4.15, I compiled the same code with no issues. There seems little doubt that something about loading 4.15 killed the environment. 0
2018-9-26 17:23:37　　评论淘帖0 邀请回答您可以邀请以下用户，快速回答问题 × qun333 该类别下有 57 个回答。邀请回答 caoguiqun 该类别下有 56 个回答。邀请回答技术发广告该类别下有 56 个回答。邀请回答 psw30 该类别下有 44 个回答。邀请回答伊丹姿子该类别下有 41 个回答。邀请回答 uwufwjrw 该类别下有 39 个回答。邀请回答 hetao1111 该类别下有 38 个回答。邀请回答 lc123617 该类别下有 35 个回答。邀请回答欧阳大大该类别下有 32 个回答。邀请回答作死不止该类别下有 31 个回答。邀请回答 asd010 该类别下有 31 个回答。邀请回答 60user92 该类别下有 29 个回答。邀请回答 wy8719 该类别下有 29 个回答。邀请回答嘻嘻爱哈哈该类别下有 28 个回答。邀请回答 haikitty 该类别下有 28 个回答。邀请回答 ju978779 该类别下有 28 个回答。邀请回答 xiuzhen122 该类别下有 27 个回答。邀请回答 pol666 该类别下有 27 个回答。邀请回答 ueywyrsdfs 该类别下有 26 个回答。邀请回答 lhly23 该类别下有 25 个回答。邀请回答举报任黎平相关推荐 • 为SAR ADC通道0配置P1.3，在配置器和编译过程中都出现了错误的原因？ 279 • 485项目安装接线时被电了很多次 1570 • 安装MPLAB X IDE和Linux失败 1695 • win7 安装 DSP/BIOS 5.31.08.15 错误 2147 • MPLAB X IDE 4.15非常多的错误 1983 • MPLAB X 4.15在Debian Linux上不起作用 2555 • 公式节点计算多项式出现错误，求助 1296 • 求救！！multisim10.1 安装出错！！error：1317 10140 • 在线等急！为什么安装之后出现错误：急！！！！ 1864 • Xilinx ISE安装时出现错误：Xsetup已停止运行 7127 1个回答

答案对人有帮助，有参考价值 0 好。。。我把它修好了。我把这些项目转移到我的笔记本电脑上，所有这些都用旧版本编译得很好。所以…我下载了旧版本和XC8我正在使用的版本。我从电脑和注册表中清除了所有的芯片碎片。在彻底清理之后，我重新启动并安装了MPLAX X 3.65和XC8 1.38，这些版本仍然在笔记本电脑上。现在所有的编译和连接都很好。我应该“打中骰子”并重新安装最新版本，这是我生命中大约45个小时。一旦回来，我不想重复它！大声笑：以上来自于百度翻译以下为原文 Well... I fixed it. I moved the projects over to my laptop, and all of them compiled just fine with an older version. So... I downloaded the old version and the version of XC8 I was using. I scrubbed all of the Microchip stuff from the computer and the registry. After a complete cleaning, I rebooted and installed MPLAB X 3.65 and XC8 1.38, the versions that were still on the laptop. Everything compiles and links just fine now. The dilemma is should I "shoot the dice" and install the latest versions again, that was about four-five hours of my life that I'll never get back, I don't care to repeat it! LoL:

2018-9-26 17:34:52 评论举报刘庸宏