构建代码和编程部分之间长时间停顿

我看到“建造成功”后，耽搁了很长时间（30秒）。经过30秒的传递，然后很快地从D:BLAHBLAH…BLAH加载代码……加载完成连接到程序员…编程目标…编程完成目标……它似乎只是坐在那里什么也不做，在30秒内。我目前使用的是PICtiT4，但我过去也有过ICD 3。现在似乎每次都这么做，但在过去，我知道它是否被打住了。还有人看到这个吗？我工作的另一位工程师也有同样的问题。有什么想法吗？无论如何，要加快速度。它需要比建筑和编程结合更长的时间！



      以下为原文

    I have a long delay (~30 seconds) after seeing "BUILD SUCCESSFUL".  After 30 seconds pass, then it goes very quickly to

Loading code from D:blahblahblah...
Loading completed
Connecting to programmer...
Programming target...
Programming completed
Running target...

It appears to be just sitting there doing nothing during the 30 seconds. I am currently using a PICkit4, but I have had this with my ICD 3 in the past as well.  Currently it seems to do it every time, but in the past I know it has been hit or miss whether that pause is there.  Anyone else see this?  Another engineer here at my work has the same issue.  Any idea what is the hold up?  Anyway to speed it up.  It takes longer than the building and programming combined!