非常不错的ESP8266驱动程序
单片机源程序如下:
- #include "led.h"
- #include "delay.h"
- #include "sys.h"
- #include "usart.h"
- #include "lcd.h"
- #include "key.h"
- #include "usmart.h"
- #include "malloc.h"
- #include "MMC_SD.h"
- #include "ff.h"
- #include "exfuns.h"
- #include "fontupd.h"
- #include "text.h"
- #include "common.h"
- #include "touch.h"
- #include "usart2.h"
- int main(void)
- {
- u8 key,fontok=0;
- delay_init(); //延时函数初始化
- NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2); //设置NVIC中断分组2:2位抢占优先级，2位响应优先级
- uart_init(115200); //串口初始化为9600
- USART2_Init(115200); //初始化串口2波特率为115200
- LCD_Init(); //初始化液晶
- LED_Init(); //LED初始化
- KEY_Init(); //按键初始化
- tp_dev.init(); //触摸屏初始化
- mem_init(); //初始化内存池
- exfuns_init(); //为fatfs相关变量申请内存
- f_mount(fs[0],"0:",1); //挂载SD卡
- f_mount(fs[1],"1:",1); //挂载FLASH.
- key=KEY_Scan(0);
- if(key==KEY0_PRES) //强制校准
- {
- LCD_Clear(WHITE); //清屏
- tp_dev.adjust(); //屏幕校准
- LCD_Clear(WHITE); //清屏
- }
- fontok=font_init(); //检查字库是否OK
- if(fontok||key==KEY1_PRES)//需要更新字库（字库不存在/KEY1按下）
- {
- LCD_Clear(WHITE); //清屏
- POINT_COLOR=RED; //设置字体为红色
- LCD_ShowString(60,50,200,16,16,"ALIENTEK STM32");
- while(SD_Initialize()) //检测SD卡
- {
- LCD_ShowString(60,70,200,16,16,"SD Card Failed!");
- delay_ms(200);
- LCD_Fill(60,70,200+60,70+16,WHITE);
- delay_ms(200);
- }
- LCD_ShowString(60,70,200,16,16,"SD Card OK");
- LCD_ShowString(60,90,200,16,16,"Font Updating...");
- key=update_font(20,110,16);//更新字库
- while(key)//更新失败
- {
- LCD_ShowString(60,110,200,16,16,"Font Update Failed!");
- delay_ms(200);
- LCD_Fill(20,110,200+20,110+16,WHITE);
- delay_ms(200);
- }
- LCD_ShowString(60,110,200,16,16,"Font Update Success!");
- delay_ms(1500);
- LCD_Clear(WHITE);//清屏
- }
- atk_8266_test(); //进入ATK_ESP8266测试
- }
所有资料51hei提供下载:
![]() （库函数版本，适合MiniSTM32开发板）扩展实验13 ATK-ESP8266WIFI模块实验.rar
|
电子发烧友论坛
0
/6 
工商网监
湘ICP备2023018690号
5988
评论
淘帖
2903
0
