完善资料让更多小伙伴认识你，还能领取20积分哦， 立即完善>
3天内不再提示
电子发烧友论坛|
#include
#include #define uchar unsigned char #define uint unsigned int ***it RS=P3^0; ***it RW=P3^1; ***it EN=P3^3; ***it K1=P2^0; ***it K2=P2^1; ***it K3=P2^2; ***it K4=P2^3; ***it K5=P2^4; uchar WaveChoice=0; uchar ys=30; uchar i,a=0; uchar sqar_num=128; uint freq; uchar code Sin[]={"Sine "}; //uchar code exp[]={"Exp "}; uchar code Squ[]={"Square "} ; uchar code Tri[]={"Triangle "}; uchar code Saw[]={"Sawtooth "} ; uchar code No[]={"No OutPut"}; uchar code Wave[]={"Wave :"}; uchar code Fre[]={"Freq :"}; uchar code tosin[256]= { 0x80,0x83,0x86,0x89,0x8d,0x90,0x93,0x96,0x99,0x9c,0x9f,0xa2,0xa5,0xa8,0xab, 0xae,0xb1,0xb4,0xb7,0xba,0xbc,0xbf,0xc2,0xc5,0xc7,0xca,0xcc,0xcf,0xd1,0xd4, 0xd6,0xd8,0xda,0xdd,0xdf,0xe1,0xe3,0xe5,0xe7,0xe9,0xea,0xec,0xee,0xef,0xf1, 0xf2,0xf4,0xf5,0xf6,0xf7,0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfd,0xfe,0xff,0xff, 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfd,0xfd,0xfc,0xfb, 0xfa,0xf9,0xf8,0xf7,0xf6,0xf5,0xf4,0xf2,0xf1,0xef,0xee,0xec,0xea,0xe9,0xe7, 0xe5,0xe3,0xe1,0xde,0xdd,0xda,0xd8,0xd6,0xd4,0xd1,0xcf,0xcc,0xca,0xc7,0xc5, 0xc2,0xbf,0xbc,0xba,0xb7,0xb4,0xb1,0xae,0xab,0xa8,0xa5,0xa2,0x9f,0x9c,0x99, 0x96,0x93,0x90,0x8d,0x89,0x86,0x83,0x80,0x80,0x7c,0x79,0x76,0x72,0x6f,0x6c, 0x69,0x66,0x63,0x60,0x5d,0x5a,0x57,0x55,0x51,0x4e,0x4c,0x48,0x45,0x43,0x40, 0x3d,0x3a,0x38,0x35,0x33,0x30,0x2e,0x2b,0x29,0x27,0x25,0x22,0x20,0x1e,0x1c, 0x1a,0x18,0x16,0x15,0x13,0x11,0x10,0x0e,0x0d,0x0b,0x0a,0x09,0x08,0x07,0x06, 0x05,0x04,0x03,0x02,0x02,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x01,0x02,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0a,0x0b, 0x0d,0x0e,0x10,0x11,0x13,0x15,0x16,0x18,0x1a,0x1c,0x1e,0x20,0x22,0x25,0x27, 0x29,0x2b,0x2e,0x30,0x33,0x35,0x38,0x3a,0x3d,0x40,0x43,0x45,0x48,0x4c,0x4e, 0x51,0x55,0x57,0x5a,0x5d,0x60,0x63,0x66,0x69,0x6c,0x6f,0x72,0x76,0x79,0x7c, 0x80}; //ÕýÏÒ²¨Âë void DelayMS(uchar ms) { uchar i; while(ms--) for(i=0;i<120;i++); } void Delay1(uint y) { uint i; for(i=y;i>0;i--); } //------------- //----------------------------- uchar Busy_Check() { uchar LCD_Status; RS=0; // ¼Ä´æÆ÷Ñ¡Ôñ RW=1; //¶Á״̬¼Ä´æÆ÷ EN=1; // ¿ªÊ¼¶Á DelayMS(1); LCD_Status=P1; EN=0; return LCD_Status; } void Write_LCD_Command(uchar cmd) { while((Busy_Check()&0x80)==0x80); RS=0; RW=0; EN=0; P1=cmd; EN=1; DelayMS(1); EN=0; } void Write_LCD_Data(uchar dat) { while((Busy_Check()&0x80)==0x80); RS=1; RW=0; EN=0; P1=dat; EN=1; DelayMS(1); EN=0; } void Init_LCD() { Write_LCD_Command(0x38); DelayMS(1); Write_LCD_Command(0x01); DelayMS(1); Write_LCD_Command(0x06); DelayMS(1); Write_LCD_Command(0x0C); DelayMS(1); } void Write_freq(uint k) { uchar qian,bai,shi,ge; qian=k/1000; bai=k/100%10; shi=k/10%10; ge=k%10; Write_LCD_Command(0x86+0x40); Write_LCD_Data(0x30+qian); Write_LCD_Data(0x30+bai); Write_LCD_Data(0x30+shi); Write_LCD_Data(0x30+ge); Write_LCD_Data(0x48); Write_LCD_Data(0x5a); } void Xianshi_f() { if(WaveChoice==1) { freq=(10000000/(50000+2860*ys)); Write_freq(freq); } if(WaveChoice==2) { freq=(10000000/(50000+2300*ys)); Write_freq(freq); } if(WaveChoice==3) { freq=(10000000/(14000+2300*ys)); Write_freq(freq); } if(WaveChoice==4) { freq=(10000000/(15000+2300*ys)); Write_freq(freq); } } void Write_wave(uchar t ) { switch(t) { case 0: Write_LCD_Command(0x86); DelayMS(5); for (i=0;i Write_LCD_Data(No); DelayMS(5); } break; case 1: ys=5; Write_LCD_Command(0x86); DelayMS(5); for (i=0;i Write_LCD_Data(Sin); DelayMS(5); } break; case 2: ys=30; Write_LCD_Command(0x86); DelayMS(5); for (i=0;i Write_LCD_Data(Squ); DelayMS(5); } break; case 3: ys=30; Write_LCD_Command(0x86); DelayMS(5); for (i=0;i Write_LCD_Data(Tri); DelayMS(5); } break; case 4: ys=30; Write_LCD_Command(0x86); DelayMS(5); for (i=0;i Write_LCD_Data(Saw); DelayMS(5); } break; } } void Out_Wave(uchar i) { uchar j; switch(i) { case 0: P0=0x00;break; case 1: for (j=0;j<255;j++) { P0=tosin[j]; Delay1(ys); } break; case 2: { if(a P0=0xff; Delay1(ys); } else { P0=0x00; Delay1(ys); } a++; } break; case 3: { if(a<128) { P0=a; Delay1(ys); } else { P0=255-a; Delay1(ys); } a++; } break; case 4: { if(a<255) { P0=a; Delay1(ys); } a++; if(a==255) { a=0; } break; } } } void keyscanf() { if(K2==0) { DelayMS(5); if(K2==0) { while(!K2); ys--; if(ys==0) ys=20; } } if(K3==0) { DelayMS(5); if(K3==0) { while(!K3); ys++; if(ys>22) ys=20; } } if(K4==0) { DelayMS(5); if(K4==0) { while(!K4); if(WaveChoice==2) sqar_num=sqar_num+2; if(sqar_num==238) sqar_num=128; } } if(K5==0) { DelayMS(5); if(K5==0) { while(!K5); if(WaveChoice==2) sqar_num=sqar_num-2; if(sqar_num==18) sqar_num=128; } } } void main() { Init_LCD(); IE=0X81; IT0=1; Write_LCD_Command(0x80); DelayMS(5); for (i=0;i Write_LCD_Data(Wave); DelayMS(5); } Write_LCD_Command(0x80+0X40); DelayMS(5); for (i=0;i Write_LCD_Data(Fre); DelayMS(5); } Write_wave(WaveChoice); while (1) { keyscanf(); Out_Wave(WaveChoice); if(!(K1&K2&K3)) Xianshi_f(); } } void EX_INT0() interrupt 0 { WaveChoice++; if(WaveChoice==5) WaveChoice=1; Write_wave(WaveChoice); } 
0
|
|
相关推荐
5 个讨论
|
|
只有小组成员才能发言，加入小组>>
求解外围电路实现的是4脚给持续低电平复位并正常工作，高电平不工作的原因
2382 浏览 1 评论
4241 浏览 3 评论
PIC1946程序有一个变量在运行过程中恢复初始值其他变量保持不变
2619 浏览 2 评论
3118 浏览 0 评论
PIC16F1825的RC5引脚，在主程序中操作无效，在中断中可以改变是为什么？
4577 浏览 5 评论
有套STM32与西门子200程序需要代写，有兴趣的工程师与有联系！
2489浏览 1评论
用XC8编译PIC18F25K80时提示下面Error,求怎么解决这个问题
6799浏览 0评论
/9 
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 （电路图） 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证：合字B2-20210191
工商网监
湘ICP备2023018690号
3700
评论
淘帖
3925
