`可能很多人都遇到过找不到国内这些常用的三极管9013 9014 8050 8550的模型`
一键分析设计隐患,首款国产PCB DFM分析软件免费用! 想了解更多的详细介绍可以百度搜索 “华秋DFM”官方链接
14
下载下来!!!!!!!我自己好好学习!!!!!!!!!!!!!!!
谢谢楼主分享
提交评论
头像被屏蔽
· 2013-7-17 11:11:45
提交评论
学习之中
感谢楼主
提交评论
谢谢分享
提交评论
按照软件帮助说明,打开文件时,产生以下信息,打开不了,试了几个,都是同样的问题.
Multisim - 2013年7月25日, 23:15:41
Loading design: "d:My DocumentsNational InstrumentsCircuit Design Suite 12.09013,8550等SPICE模型ss8050.cir"
Ignored: Title line '*************** Power Discrete Bipolar Electrical Parameters ***************'
Error: Main circuit not found in SPICE netlist.
=====
Finished loading design: "d:My DocumentsNational InstrumentsCircuit Design Suite 12.09013,8550等SPICE模型ss8050.cir".
提交评论
软件帮助说明如下:
Importing the SPICE Netlist into Multisim
Complete the following steps to import the Rc.cir SPICE netlist into Multisim:
1.Select File»Open. Click on the drop-down arrow next to “Files of type”, and select SPICE
netlist files (*.cir).
2.Select the file Rc.cir from the C:Temp directory and click Open. The Rc.cir file imports
into Multisim and shows the schematic equivalent of the text-based SPICE netlist.
3.Select File»Save as and name the file Rc.ms11.
提交评论
Importing the SPICE Netlist into Multisim
Complete the following steps to import the Rc.cir SPICE netlist into Multisim:
1.Select File»Open. Click on the drop-down arrow next to “Files of type”, and select SPICE
netlist files (*.cir).
2.Select the file Rc.cir from the C:Temp directory and click Open. The Rc.cir file imports
into Multisim and shows the schematic equivalent of the text-based SPICE netlist.
3.Select File»Save as and name the file Rc.ms11.
提交评论
问下,这个模型有没有版本要求啊??有的话,我就要换版本了<<<问下楼竹,你的是什么版本啊???
提交评论