完善资料让更多小伙伴认识你，还能领取20积分哦， 立即完善>
3天内不再提示
电子发烧友论坛|
在带有NVIDIA K1 GPU（K120Q）的XenServer 6.5 SP1上运行的XenDesktop 7.6映像（Win7 32位）遇到一个问题，其中explorer.exe进程不断占用5-10％的CPU，并且该进程每2分钟暂停几分之一秒
几秒钟左右。 这会导致开始菜单和其他资源管理器功能显示为“滞后”，并且用户抱怨他们的会话速度很慢。 经过一段时间（通常1-2小时），Explorer恢复正常。 禁用NVIDIA显卡/驱动程序摆脱了问题，我可以通过Process Monitor / Explorer确认它与NVIDIA GPU有关。 我已经用procdump做了一些转储我很乐意分享，但是我自己也无法解读其他的东西。 我也尝试了多个版本的驱动程序 - 我们使用的当前版本是348.27。 如果我们直接登录到VDA的控制台（例如，在XenCenter中），则不会发生此问题。 只有通过Citrix Receiver从Wyse Xenith Pro 2和Windows桌面登录时才会发生这种情况。 任何人都可以确认他们自己的XenDesktop + K120Q设置是否在explorer.exe上显示相同的CPU使用率？ 以上来自于谷歌翻译 以下为原文 Our XenDesktop 7.6 image (Win7 32-bit) running on XenServer 6.5 SP1 with NVIDIA K1 GPU (K120Q) is experiencing an issue where explorer.exe process constantly occupies 5-10% CPU and the process hangs for a fraction of a second every 2 seconds or so. This causes the start menu and other explorer functions to appear to "lag" and users complain their session is slow. After some time (usually 1-2 hours), Explorer goes back to normal. Disabling the NVIDIA card/driver gets rid of the issue and I can confirm with Process Monitor/Explorer that it has something to do with the NVIDIA GPU. I've done some dumps with procdump I'm happy to share, but unable to decipher much else myself. I've tried multiple versions of the driver as well - the current one we use is 348.27. The issue does not occur if we log directly in to the console of the VDA (for example, in XenCenter). It only happens when logging in via Citrix Receiver, from both Wyse Xenith Pro 2 and Windows desktops. Can anyone confirm if their own XenDesktop + K120Q setup exhibits the same CPU usage on explorer.exe? 
0
|
|
相关推荐
7个回答
|
|
|
我们已经看到了类似的问题，它与系统托盘中的无损指示器相关联。
禁用无损指示符（通过删除.exe）似乎可以解决此问题。 我们不知道的是造成它的根本原因或触发条件。 看看无损指标过程，看看终止它时会发生什么。 以上来自于谷歌翻译 以下为原文 We've seen a similar issue where it's linked to the lossless indicator in the system tray. Disabling the lossless indicator (by removing the .exe) appears to resolve the issue. What we don'tyet know is the root cause or trigger condition to cause it. Take a look at the lossless indicator process and see what happens when you terminate it. |
|
|
|
|
|
继Citrix之后，他们告诉我们XD 7.6 FP3中修复了一些问题 - 如果使用XD7.6，可能需要在http://docs.citrix.com/en-us/xenapp-and-xendesktop/7-中查看这个问题。
6 / X-AD-什么新/功能包 - 3 - VDA-的桌面操作系统---固定issues.html 特别是Jason指出的无损指标问题可能是： 在启用了HDX 3D Pro的VDA上，无损指示器任务栏图标（对于LLIndicator.exe）可能无法指示无损状态，并且在右键单击时可能不响应。 [＃LC2931] VDA 7.6.300与7.7附带的VDA相同，因此升级到7.7还应包括7.6 FP3的修复程序 如果您遇到/怀疑它们，使用XD7.6绝对值得阅读其他问题 - ＃LC2931是您可以用来与Citrix支持讨论的错误号和参考。 我相信任何没有支持的Citrix客户都可以针对已知/已确认的问题提出机票，如果已知问题将退还该机票。 以上来自于谷歌翻译 以下为原文 Following up with Citrix, they advised us of some issues fixed in XD 7.6 FP3 - if using XD7.6 it's probably worth checking this in http://docs.citrix.com/en-us/xenapp-and-xendesktop/7-6/xad-whats-new/feature-pack-3--vda-for-desktop-os---fixed-issues.html In particular the lossless indicator issue indicated by Jason is likely to be: On VDAs with HDX 3D Pro enabled, the lossless indicator taskbar icon (for LLIndicator.exe) might fail to indicate the lossless state and might not respond when right-clicked. [#LC2931] VDA 7.6.300 is the same as the VDA that comes with 7.7 and so upgrading to 7.7 should also include the fix as per 7.6 FP3 It's definitely worth reading the other issues if using XD7.6 in case you encounter/suspect them - the #LC2931 is the bug number and reference that you can use to discuss with Citrix support. I believe any customer of Citrix without support can raise a ticket on a known/acknowledged issue that will be refunded if a known issue. |
|
|
|
|
|
瑞秋，
phite描述的问题与你描述的问题不同。 ＃LC2931：这是我报告的，当右键单击LLIndicator时，没有弹出窗口可以选择LossLess模式。 在FP3中仍然可以看到Explorer.exe占用5％-10％CPU的问题。 如果您查看ProcMon，它会不断向注册表查询一些NVidia密钥。 以上来自于谷歌翻译 以下为原文 Rachel, The issue described by phite is different from the one you describe. #LC2931: This was reported by me, when right clicking on the LLIndicator there was no popup to select LossLess mode. The issue with Explorer.exe consuming 5%-10% CPU is still visible in FP3. If you look in ProcMon it is continuously querying the registry for some NVidia keys. |
|
|
|
|
|
嗨RKossen，
谢谢你，知道这很有用。 我会去打猎，看看我们是否可以跟踪这个...感谢您的信息，非常有用！ 雷切尔 以上来自于谷歌翻译 以下为原文 Hi RKossen, thank you that's useful to know. I will go hunting and see if we can track this one down... thanks for the information, very useful! Rachel |
|
|
|
|
|
嗨RKossen，
我已经与Citrix和报告explorer.exe cpu问题的架构师进行了核实。 LC2931修复解决了无损指示器未显示但还包括其他更改以解决CPU消耗问题（LC2391是客户报告的错误的参考，有时还包含其他内部发现的问题，我被告知 - 但只记录了报告的问题） 我们的架构师已经重新测试FP3并发现他拥有的explorer.exe cpu问题由FP3解决。 所以听起来有些体验它会发现它已修复。 而且听起来我们内部系统中还没有其他问题（或者我找不到它）。 您是否向Citrix或NVIDIA报告了您所看到的内容，并且您是否有参考编号？ 如果是这样，我会追逐参考号码。 最好的祝愿， 雷切尔 以上来自于谷歌翻译 以下为原文 Hi RKossen, I've checked with both Citrix and the architect who reported an explorer.exe cpu issue. The LC2931 fix addressed the lossless indicator not displaying but also included other changes to address a CPU consumption issue (the LC2391 is a reference for the customer reported bug and sometimes contains other internally discovered issues I am told - but only reported ones documented) Our architect has retested with FP3 and found that the explorer.exe cpu issue he has is resolved by FP3. So it sounds like some experiencing it will find it fixed. And it sounds like there must be another issue that we haven't got in our internal systems yet (or I just can't find it). Have you reported what you are seeing with procmon to Citrix or NVIDIA and do you have reference numbers? If so I will chase the reference numbers. Best wishes, Rachel |
|
|
|
|
|
感谢所有回复的人。
我想我忘了打开这个帖子的通知，所以我再也没有回来。 我还可以确认问题与我们的LLIndicator.exe（无损指示器）有关。 但是，我们最近将VDA更新为7.6.3（FP3），问题仍然存在。 我可以通过使用Process Explorer来轻松确认暂停LLIndicator.exe（您无法杀死它，因为它只是立即重新启动）并且Explorer.exe CPU使用率立即从5-9％下降到0％。 我们在图像上执行了7.6到7.6.3的升级 - 不确定它是否与干净安装有所不同。 我不确定是否有通过GPO / Registry / CitrixPolicy删除LLIndicator.exe的方法，因为我们不需要它 - 我们的用户不需要知道无损状态并且无法控制设置。 我还没试过7.7，但是如上所述它应该与7.6.3几乎相同。 以上来自于谷歌翻译 以下为原文 Thanks for all the responses guys. I guess I forgot to turn on notifications to this thread, so I never came back to respond. I can also confirm that the issue is tied to LLIndicator.exe for us (the Lossless Indicator). However, we recently updated our VDA to 7.6.3 (FP3) and the issue is still there. I can easily confirm by using Process Explorer to suspend LLIndicator.exe (you can't kill it because it just re-launches immediately) and Explorer.exe CPU usage immediately goes from 5-9% down to 0%. We performed an upgrade from 7.6 to 7.6.3 on our image - not sure if it makes a difference or not versus a clean install. I'm not sure if there is a method for removing LLIndicator.exe via GPO/Registry/CitrixPolicy, since we have no need for it - our users don't need to know the lossless state and have no control over the setting. I've not yet tried 7.7, but as noted it should be almost identical to 7.6.3. |
|
|
|
|
|
可能值得尝试一个干净的VDA安装，只是为了检查是否清理它。
如果是这样，我们可以让Citrix知道升级过程没有修复它。 以上来自于谷歌翻译 以下为原文 It may be worth trying a clean VDA install, just to check if that cleans it up. If it does we can let Citrix know hte upgrade process isn't fixing it. |
|
|
|
|
只有小组成员才能发言，加入小组>>
使用Vsphere 6.5在Compute模式下使用2个M60卡遇到VM问题
3075 浏览 5 评论
是否有可能获得XenServer 7.1的GRID K2驱动程序？
3490 浏览 4 评论
/6 
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 （电路图） 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证：合字B2-20210191
工商网监
湘ICP备2023018690号
2724
评论
淘帖
6432
