PNA E8364A扫描平均值时显示扫描计数该怎么办？

大家好，当我尝试在S参数测量期间使用扫描平均值时，我遇到了一些问题。
我将扫描平均值设置为10.在屏幕上，它正确显示扫描计数。
但是，当我尝试使用Vee程序来获取平均数据时。
在给我数据之前，它不会等到整个平均值完成。
但是，在返回S参数值之前，我可以让PNA等到平均值完成吗？
在附件中是我写的用于进行S参数测量的vee代码。
谢谢！



     以下为原文

  Hi Everyone,

I have some problem when I try to use sweep average during S-parameter measurement. I set the sweep average to 10. On the screen, it shows the sweep count correctly. However, when I try to use Vee program to grab the averaged data. It doesn't wait until the whole average is done before giving me the data. However can I let the PNA wait until average is done before return the S-Parameter value? In the attachment is the vee code I wrote to do the S-parameter measurement. Thanks!   
附件

• untitled.bmp380.2 KB