赛灵思
直播中

陈婧甄

7年用户 201经验值
私信 关注
[问答]

如何运行Digilent Xilinx Spartan-6(Atlys_Demo_BIST)附带的初始测试程序

大家好,
我只是想运行Digilent Xilinx Spartan-6(Atlys_Demo_BIST)附带的初始测试程序。
所以我连接电源和HDMI插头(HDMI当然)并启动电路板,没有任何反应。
屏幕保持黑色。
有任何想法吗?
我下载了.bin文件并再次刷新芯片,以确保程序存在。
问候

以上来自于谷歌翻译


以下为原文

Hello Guys,

I just wanted to run the initial Test Program, shipped with the Digilent Xilinx Spartan-6 (Atlys_Demo_BIST). So i connected power and a HDMI-Plug (HDMI-out of course) and booted the board, nothing happens. The screens stays black. Any ideas?

I downloaded the .bin file and flashed the chip again to be sure the program is present.



Regards

回帖(1)

刘鹏

2019-7-24 14:36:17
您好,请尝试在论坛上发布此内容。
他们将能够很好地调试这个.https://forum.digilentinc.com/
-Pratham ------------------------------------------------
----------------------------------------------请注意 - 请
如果提供的信息有用,请将答案标记为“接受为解决方案”。给予您认为有用并回复导向的帖子。感谢K-
--------------------------------------------------
-----------------------

以上来自于谷歌翻译


以下为原文

Hello,

Try posting this on there forum as well. They will be in a good position to debug this.

https://forum.digilentinc.com/-Pratham

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
举报

更多回帖

发帖
×
20
完善资料,
赚取积分