没有。
位文件包含FPGA内每个配置(和存储器)结构的配置信息。
除了所有其他考虑因素之外,由于5vlx50中的CLB比5vlx30多得多,因此没有针对那些额外LUT的配置信息(还有许多其他原因导致您无法执行此操作)。
您需要返回源并为新设备生成新的位文件 - 这意味着重新运行ngdbuild,map和par。
Avrum
以上来自于谷歌翻译
以下为原文
No.
The bitfile contains configuration information for each and every configuration (and memory) structure within the FPGA. Aside from all other considerations, since there are many more CLBs in the 5vlx50 than the 5vlx30 there simply is no configuration information for those extra LUTs (and there are many other reasons why you can't do this).
You need to go back to the source and generate a new bitfile for the new device - this means re-running ngdbuild, map and par.
Avrum
没有。
位文件包含FPGA内每个配置(和存储器)结构的配置信息。
除了所有其他考虑因素之外,由于5vlx50中的CLB比5vlx30多得多,因此没有针对那些额外LUT的配置信息(还有许多其他原因导致您无法执行此操作)。
您需要返回源并为新设备生成新的位文件 - 这意味着重新运行ngdbuild,map和par。
Avrum
以上来自于谷歌翻译
以下为原文
No.
The bitfile contains configuration information for each and every configuration (and memory) structure within the FPGA. Aside from all other considerations, since there are many more CLBs in the 5vlx50 than the 5vlx30 there simply is no configuration information for those extra LUTs (and there are many other reasons why you can't do this).
You need to go back to the source and generate a new bitfile for the new device - this means re-running ngdbuild, map and par.
Avrum
举报