是德科技
直播中

朱志兴

8年用户 298经验值
私信 关注
[问答]

访问N9342C SCPI端口没有响应

我正在尝试使用套接字和SCPI命令通过以太网接口与N9342C进行通信
像大多数其他设备一样,我试图使用端口5025,但它没有响应。
它ping并且“nmap”报告某些端口是打开的,但不是5025.它不允许打开套接字到5025.套接字访问端口是否不同于5025?

以上来自于谷歌翻译


     以下为原文

  I am attempting to communicate with an N9342C through the ethernet interface using sockets and SCPI commands. Like most other equipment I am attempting to use port 5025, but it's not responding.  It pings and "nmap" is reporting some ports are open, but not 5025.  It will not allow an open socket to 5025.

Is the socket access port different than 5025?  

回帖(2)

何洁萍

2019-1-25 09:50:19
您好tjzeta01,您尝试过:用户:admin pwd:admin或user:guest pwd:guest?
希望这可以帮助。
此致Simon Coleby.Edited:simon_coleby于2015年10月23日上午3:09开始

以上来自于谷歌翻译


     以下为原文

  Hi tjzeta01,

Have you tried: 

user: admin
pwd: admin

or

user: guest
pwd: guest

?
Hope this helps. Regards, Simon Coleby.

Edited by: simon_coleby on Oct 23, 2015 3:09 AM
举报

朱志兴

2019-1-25 09:58:10
引用: yhxc 发表于 2019-1-25 09:50
您好tjzeta01,您尝试过:用户:admin pwd:admin或user:guest pwd:guest?
希望这可以帮助。
此致Simon Coleby.Edited:simon_coleby于2015年10月23日上午3:09开始

管理员和客人都没有工作。
尝试了许多其他组合,但没有运气。
谢谢。
-tj

以上来自于谷歌翻译


     以下为原文

  Neither admin nor guest worked. Tried many other combinations, but no luck.
 
Thanks.
 
-tj
举报

更多回帖

发帖
×
20
完善资料,
赚取积分