英特尔固态工具箱V.3.5.4是不是改版了？

您好gryzaskl，感谢您在英特尔®社区发布。当英特尔®SSD工具箱与英特尔®SSD545s，Pro 5450s，E5100s系列3C / 3P / 2E固件更新生成时，使用了错误的固件包，早期版本为
使用固件包而不是最终的生产版本。
该工具的新版本，针对英特尔®SSDToolbox 3.5.6，带有生产版本固件，将在未来几周内推出.Regards，Diego V.



以下为原文

Hi gryzaskl,

Thank you for posting in the Intel® communities.

A wrong firmware package was used when the Intel® SSD Toolbox with Intel® SSD 545s, Pro 5450s, E5100s Series 3C/3P/2E firmware updates were generated, an earlier version of the firmware packages were used instead of the final production release.   A new version of the tool, targeting Intel® SSD Toolbox 3.5.6, with production release firmwares, will be made available in the coming weeks.

Regards,
Diego V.
 

感谢您的及时回复。
我已经使用Toolbox 3.5.4中包含的3C版本更新了我的545s SSD上的固件。
在新的Toolbox版本可用之前，您是否建议FW回滚到2C版本？



以下为原文

Thank you for your prompt response.
 
I have already updated the firmware on my 545s SSD with the 3C version contained in Toolbox 3.5.4.
Until the new Toolbox release will be available do you recommend FW rollback to the 2C version?

嗨gryzaskl，如果驱动器工作正常，您可以在接下来的几周内继续使用此固件版本。我们将在未来几周内更新版本。
请更新到最新的固件版本，以确保您使用的是生产固件版本.Regards，Diego V.



以下为原文

Hi gryzaskl,

If the drive is working fine, you can keep using this firmware version during the next weeks.

We will have an updated version in the coming weeks. Please update to the latest firmware version to ensure you are using the production firmware release.

Regards,
Diego V.

是的，驱动器正常运行，就像FW升级之前一样。
感谢您的支持。



以下为原文

Yes, the drive is working perfectly just as before the FW upgrade.
Thank you for your support.