54825A的恢复磁盘

大家好，有一个范围54825A，当它尝试启动我看到内存测试完成后，在IDE-0上找到硬盘然后启动Windows 98 ....并在此处停止。
因此安装Windows或使用HDD需要恢复它。
在本指南http://www.keysight.com/upload/c ... UpgradeRecovery.pdf我的模型有方法恢复与软盘的数量，但提到链接到ftp实用程序位于ftp：/ ft
/ftp.agilent.com/pub/callpub1/ddt/scope/548xx/Upg_Rec/3_72/3_72_upg.exe不存在此类位置有人可以将此文件或链接发送给我，我可以将其下载。
TKS

以上来自于谷歌翻译

   以下为原文

  Hi All,

have a scope 54825A and when it try to boot i see that memory test is done, found HDD on IDE-0 and then
Starting Windows 98....
and stopped here.
So something with Windows installed or with HDD and need to recover it.
In this guide http://www.keysight.com/upload/c ... UpgradeRecovery.pdf
for my model there is way to recover with number of the floppy disks but mentioned link to ftp where utility is located is broken
ftp://ftp.agilent.com/pub/callpu ... c/3_72/3_72_upg.exe
not exist such location
Can somebody send me this file or link where i can download it.
Tks

回帖（1）

周菊

2018-10-17 11:29:42

试试这个链接：ftp：//ftp.keysight.com/callpub3/ddt/scope/548xx/Upg_Rec/3_72/ FYI ... 54825A是一个非常古老的范围。
它在2006年“失去了支持”。不能保证这些文件会留在那里。
我很惊讶他们在那里...... Al

以上来自于谷歌翻译

以下为原文

Try this link:
ftp://ftp.keysight.com/callpub3/ddt/scope/548xx/Upg_Rec/3_72/

FYI... The 54825A is a VERY old scope. It went 'out of support' in 2006. There's no guarantee that these files will be staying around. I'm surprised that they are there at all...

Al

更多回帖

傅利

54825A的恢复磁盘

回帖（1）

周菊

相关问答

Infiniium 54825a无法自我校准触发器

针对54825A示波器的扩展触发选项015无法找到

8753如何处理HPIB磁盘

浅析RAID磁盘阵列

Windows无法读取磁盘

无法读取磁盘到VNA的系数

如何清理逻辑磁盘？

存储管理的磁盘结构分为哪几部分

zigbee恢复网络是依据哪些参数恢复网络？

PNA-X校准可以首先检查是否有足够的磁盘空间可用吗

20万+工程师都在用，免费PCB检查工具