请大神，指导如何向Advanced Design System导入spice模型，spice模型我是在官网下载的spi格式的模型文件，导入后显示：
- Netlist Translator (*) 372.300 Oct 15 2011
- ADS Netlist translation log
- Input format: SPICE Version 3
- Input filename: D:Agilentspiceirf540n.spi
- Output format: ADS Netlist file
- Output filename: C:UsersPHHDesktopadsWMyWorkMyWorkspace_02wrkdatairf540n.net
- Special options:
- Processing first line as comment.
- Begin translation at Sun Dec 14 16:15:59 2014
- Creating netlist.
- Reading item definition file "D:AgilentADS2011_10/configspctoiff.cfg"
- ERROR: Found unmatched end of subckt at line 60.
- ERROR: Found unmatched end of subckt at line 69.
- Translation failed at Sun Dec 14 16:15:59 2014.
上方红色是显示的错误。
导入的IRF540N的模型文件如下：
- .SUBCKT irf540n 1 2 3
- * SPICE3 MODEL WITH THERMAL RC NETWORK
- **************************************
- * Model Generated by MODPEX *
- *Copyright(c) Symmetry Design Systems*
- * All Rights Reserved *
- * UNPUBLISHED LICENSED SOFTWARE *
- * Contains Proprietary Information *
- * Which is The Property of *
- * SYMMETRY OR ITS LICENSORS *
- *Commercial Use or Resale Restricted *
- * by Symmetry License Agreement *
- **************************************
- * Model generated on Sep 5, 01
- * MODEL FORMAT: SPICE3
- * Symmetry POWER MOS Model (Version 1.0)
- * External Node Designations
- * Node 1 -> Drain
- * Node 2 -> Gate
- * Node 3 -> Source
- M1 9 7 8 8 MM L=100u W=100u
- .MODEL MM NMOS LEVEL=1 IS=1e-32
- +VTO=3.58173 LAMBDA=0.00806114 KP=112.25
- +CGSO=1.896e-05 CGDO=1e-11
- RS 8 3 0.025918
- D1 3 1 MD
- .MODEL MD D IS=1.565e-11 RS=0.006486 N=1.1328 BV=100
- +IBV=0.00025 EG=1.2 XTI=3.32496 TT=0
- +CJO=1.16e-09 VJ=3.16363 M=0.840542 FC=0.5
- RDS 3 1 1e+06
- RD 9 1 0.0130608
- RG 2 7 6.45271
- D2 4 5 MD1
- * Default values used in MD1:
- * RS=0 EG=1.11 XTI=3.0 TT=0
- * BV=infinite IBV=1mA
- .MODEL MD1 D IS=1e-32 N=50
- +CJO=1.30485e-09 VJ=0.899032 M=0.9 FC=1e-08
- D3 0 5 MD2
- * Default values used in MD2:
- * EG=1.11 XTI=3.0 TT=0 CJO=0
- * BV=infinite IBV=1mA
- .MODEL MD2 D IS=1e-10 N=0.4 RS=3e-06
- RL 5 10 1
- FI2 7 9 VFI2 -1
- VFI2 4 0 0
- EV16 10 0 9 7 1
- CAP 11 10 2.35428e-09
- FI1 7 9 VFI1 -1
- VFI1 11 6 0
- RCAP 6 10 1
- D4 0 6 MD3
- * Default values used in MD3:
- * EG=1.11 XTI=3.0 TT=0 CJO=0
- * RS=0 BV=infinite IBV=1mA
- .MODEL MD3 D IS=1e-10 N=0.4
- .ENDS irf540n
- *SPICE Thermal Model Subcircuit
- .SUBCKT irf540nt 3 0
- R_RTHERM1 2 3 0.158
- R_RTHERM2 1 2 0.274
- R_RTHERM3 0 1 0.29
- C_CTHERM1 2 3 0.00131
- C_CTHERM2 1 2 0.001686
- C_CTHERM3 0 1 0.022562
- .ENDS irf540nt
请各位大神能给点建议？？？
0
|
|
|
|
|
|
|
ADS默认导入的网表文件第一行是注释，你那个模型文件第一行是SPICE语法，所以或者在第一行加注释，或者在导入的选项里取消勾选第一行注释
|
|
|
|
|
|
|
|
|
/6 
工商网监
湘ICP备2023018690号
6961
淘帖
179
发表评论
赞
回复
