[问答]

esp32s3怎么关闭wifi日志打印？

问答对人有帮助，内容完整，我也想知道答案 0 使用esp-idf/v4.4最新的版本，esp32s3的芯片，配置项component config->Wifi中没有wifi log的配置，全局logoutput改成none还是会输出wifi的打印 I (0) cpu_start: App cpu up. I (1686) spiram: SPI SRAM memory test OK I (1695) cpu_start: Pro cpu start user code I (1696) cpu_start: cpu freq: 240000000 I (1696) cpu_start: Application information: I (1696) cpu_start: Project name: t3 I (1696) cpu_start: App version: 1.3.1 I (1696) cpu_start: Compile time: Nov 3 2022 17:52:45 I (1696) cpu_start: ELF file SHA256: a201cc5e5ad7aa80... I (1697) cpu_start: ESP-IDF: v4.4.2-dirty I (1697) heap_init: Initializing. RAM available for dynamic allocation: I (1697) heap_init: At 3FCB5C60 len 0002A3A0 (168 KiB): D/IRAM I (1697) heap_init: At 3FCE0000 len 0000EE34 (59 KiB): STACK/DRAM I (1698) heap_init: At 3FCF0000 len 00008000 (32 KiB): DRAM I (1698) heap_init: At 600FE028 len 00001FD8 (7 KiB): RTCRAM I (1698) spiram: Adding pool of 8192K of external SPI memory to heap allocator I (1699) spi_flash: detected chip: gd I (1699) spi_flash: flash io: dio I (1700) sleep: Configure to isolate all GPIO pins in sleep state I (1701) sleep: Enable automatic switching of GPIO sleep configuration I (1701) esp_core_dump_uart: Init core dump to UART I (1701) coexist: coexist rom version e7ae62f I (1702) cpu_start: Starting scheduler on PRO CPU. I (0) cpu_start: Starting scheduler on APP CPU. I (1702) spiram: Reserving pool of 32K of internal memory for DMA/internal allocations I (1742) Board: qcloud_pid:IQ6QIFREU1 qcloud_name:0000000007 qcloud_secret:P0Orco26h0w3GBpzdB1uxQ== I (1792) Board: i2c1 init I (1812) Board: aw9523 init I (1812) state_manage: reset , ESP_RST_UNKOWN W (1812) state_manage: esp reset reason code : 0 W (1812) state_manage: last sleep reason code : 5 W (1812) state_manage: wake up reason code : 4 I (1812) ticloud_ota: Running firmware version: 1.3.1 I (1812) MAIN: sample start 1.3.1 I (1822) chargermanager: early check batval = 80 display_power = 81 I (1822) chargermanager: early check set display_power = 80 I (1822) chargermanager: early check pwrdis.display_power = 80, pwrdis.charge_status = 0 I (1822) gpio: GPIO[44]\| InputEn: 1\| OutputEn: 1\| OpenDrain: 0\| Pullup: 0\| Pulldown: 0\| Intr:0 I (1822) gpio: GPIO[42]\| InputEn: 0\| OutputEn: 0\| OpenDrain: 0\| Pullup: 1\| Pulldown: 0\| Intr:0 I (1832) gpio: GPIO[41]\| InputEn: 0\| OutputEn: 0\| OpenDrain: 0\| Pullup: 1\| Pulldown: 0\| Intr:0 I (1832) gpio: GPIO[43]\| InputEn: 0\| OutputEn: 0\| OpenDrain: 0\| Pullup: 1\| Pulldown: 0\| Intr:0 I (1902) Board: sdcard init I (1982) ES8388: init,out:00, in:00 I (1992) I2S: DMA Malloc info, datalen=blocksize=640, dma_buf_count=6 I (1992) I2S: DMA Malloc info, datalen=blocksize=640, dma_buf_count=6 I (1992) I2S: I2S0, MCLK output by GPIO21 I (1992) audio: bgm player,enter player task I (1992) audio: create a player I (1992) audio: create a player I (1992) audio: sys player,enter player task I (2042) pp: pp rom version: e7ae62f I (2042) net80211: net80211 rom version: e7ae62f I (2052) wifi:wifi driver task: 3fce9b30, prio:23, stack:6656, core=0 I (2052) system_api: Base MAC address is not set I (2052) system_api: read default base MAC address from EFUSE I (2062) wifi:wifi firmware version: eeaa27d I (2062) wifi:wifi certification version: v7.0 I (2062) wifi:config NVS flash: enabled I (2062) wifi:config nano formating: disabled I (2062) wifi:Init data frame dynamic rx buffer num: 32 I (2062) wifi:Init management frame dynamic rx buffer num: 32 I (2062) wifi:Init management short buffer num: 32 I (2062) wifi:Init static tx buffer num: 16 I (2072) wifi:Init tx cache buffer num: 32 I (2072) wifi:Init static tx FG buffer num: 2 I (2072) wifi:Init static rx buffer size: 1600 I (2072) wifi:Init static rx buffer num: 10 I (2072) wifi:Init dynamic rx buffer num: 32 I (2072) wifi_init: rx ba win: 6 I (2072) wifi_init: tcpip mbox: 32 I (2072) wifi_init: udp mbox: 6 I (2072) wifi_init: tcp mbox: 6 I (2072) wifi_init: tcp tx win: 5744 I (2072) wifi_init: tcp rx win: 5744 I (2072) wifi_init: tcp mss: 1440 I (2072) wifi_init: WiFi/LWIP prefer SPIRAM I (2072) wifi_init: WiFi IRAM OP enabled I (2072) wifi_init: WiFi RX IRAM OP enabled I (2072) esp_qcloud_mqtt: Initialising MQTT I (2072) DETAILSAPP: on_pause I (2342) dev_ledc.c(92): set_ledc_ch pin: 44 ch: 0 hpoint:0 I (2342) dev_ledc.c(132): pin: 44 duty: 300 time: 0 hpoint:0 ch:0 I (2342) dev_ledc.c(170): ch: 0 duty: 300 time: 0 hpoint:0 I (2372) phy_init: phy_version 503,13653eb,Jun 1 2022,17:47:08 I (2402) wifi:mode : sta (f4:12:fa:58:10:d8) I (2402) wifi:enable tsf I (2412) MAIN: console init I (2512) wifi<1,1>, old:<1,0>, ap:<255,255>, sta:<1,1>, prof:1 I (2512) wifi:state: init -> auth (b0) I (3412) usb_serial_jtag: ALREADY NULL I (3512) wifi:state: auth -> init (200) I (3512) wifi<1,0>, old:<1,1>, ap:<255,255>, sta:<1,1>, prof:1 I (6002) wifi<1,1>, old:<1,0>, ap:<255,255>, sta:<1,1>, prof:1 I (6002) wifi:state: init -> auth (b0) I (7002) wifi:state: auth -> init (200) I (7002) wifi<1,0>, old:<1,1>, ap:<255,255>, sta:<1,1>, prof:1 I (9472) wifi<1,1>, old:<1,0>, ap:<255,255>, sta:<1,1>, prof:1 I (9472) wifi:state: init -> auth (b0) I (10482) wifi:state: auth -> init (200) I (10482) wifi<1,0>, old:<1,1>, ap:<255,255>, sta:<1,1>, prof:1 I (12952) wifi<1,1>, old:<1,0>, ap:<255,255>, sta:<1,1>, prof:1 I (12952) wifi:state: init -> auth (b0) I (13952) wifi:state: auth -> init (200) I (13952) wifi<1,0>, old:<1,1>, ap:<255,255>, sta:<1,1>, prof:1 I (16432) wifi<1,1>, old:<1,0>, ap:<255,255>, sta:<1,1>, prof:1 I (16432) wifi:state: init -> auth (b0) I (17432) wifi:state: auth -> init (200) I (17432) wifi<1,0>, old:<1,1>, ap:<255,255>, sta:<1,1>, prof:1 I (19922) wifi<1,1>, old:<1,0>, ap:<255,255>, sta:<1,1>, prof:1 I (19922) wifi:state: init -> auth (b0) I (20922) wifi:state: auth -> init (200) I (20922) wifi<1,0>, old:<1,1>, ap:<255,255>, sta:<1,1>, prof:1 I (23402) wifi<1,1>, old:<1,0>, ap:<255,255>, sta:<1,1>, prof:1 I (23402) wifi:state: init -> auth (b0) I (24402) wifi:state: auth -> init (200) I (24402) wifi<1,0>, old:<1,1>, ap:<255,255>, sta:<1,1>, prof:1 I (26882) wifi<1,1>, old:<1,0>, ap:<255,255>, sta:<1,1>, prof:1 I (26882) wifi:state: init -> auth (b0) I (27882) wifi:state: auth -> init (200) I (27882) wifi<1,0>, old:<1,1>, ap:<255,255>, sta:<1,1>, prof:1 I (30362) wifi<1,1>, old:<1,0>, ap:<255,255>, sta:<1,1>, prof:1 I (30372) wifi:state: init -> auth (b0) I (31372) wifi:state: auth -> init (200) I (31372) wifi<1,0>, old:<1,1>, ap:<255,255>, sta:<1,1>, prof:1 I (33842) wifi<1,1>, old:<1,0>, ap:<255,255>, sta:<1,1>, prof:1 I (33842) wifi:state: init -> auth (b0) I (34842) wifi:state: auth -> init (200) I (34842) wifi<1,0>, old:<1,1>, ap:<255,255>, sta:<1,1>, prof:1 I (37322) wifi<1,1>, old:<1,0>, ap:<255,255>, sta:<1,1>, prof:1 I (37322) wifi:state: init -> auth (b0) I (38322) wifi:state: auth -> init (200) I (38332) wifi<1,0>, old:<1,1>, ap:<255,255>, sta:<1,1>, prof:1 I (40802) wifi<1,1>, old:<1,0>, ap:<255,255>, sta:<1,1>, prof:1 I (40802) wifi:state: init -> auth (b0) I (41812) wifi:state: auth -> init (200) I (41812) wifi<1,0>, old:<1,1>, ap:<255,255>, sta:<1,1>, prof:1 I (44292) wifi<1,1>, old:<1,0>, ap:<255,255>, sta:<1,1>, prof:1 I (44292) wifi:state: init -> auth (b0) I (45292) wifi:state: auth -> init (200) I (45292) wifi<1,0>, old:<1,1>, ap:<255,255>, sta:<1,1>, prof:1 I (47772) wifi<1,1>, old:<1,0>, ap:<255,255>, sta:<1,1>, prof:1 I (47772) wifi:state: init -> auth (b0) I (48772) wifi:state: auth -> init (200) I (48772) wifi<1,0>, old:<1,1>, ap:<255,255>, sta:<1,1>, prof:1 I (51252) wifi<1,1>, old:<1,0>, ap:<255,255>, sta:<1,1>, prof:1 I (51252) wifi:state: init -> auth (b0) I (52252) wifi:state: auth -> init (200) I (52262) wifi<1,0>, old:<1,1>, ap:<255,255>, sta:<1,1>, prof:1 I (57092) wifi<1,1>, old:<1,0>, ap:<255,255>, sta:<1,1>, prof:1 I (57092) wifi:state: init -> auth (b0) I (58092) wifi:state: auth -> init (200) I (58092) wifi<1,0>, old:<1,1>, ap:<255,255>, sta:<1,1>, prof:1 I (60572) wifi<1,1>, old:<1,0>, ap:<255,255>, sta:<1,1>, prof:1 I (60572) wifi:state: init -> auth (b0) I (61572) wifi:state: auth -> init (200) I (61572) wifi<1,0>, old:<1,1>, ap:<255,255>, sta:<1,1>, prof:1 I (64062) wifi<1,1>, old:<1,0>, ap:<255,255>, sta:<1,1>, prof:1 I (64062) wifi:state: init -> auth (b0) I (65062) wifi:state: auth -> init (200) I (65062) wifi<1,0>, old:<1,1>, ap:<255,255>, sta:<1,1>, prof:1 0 本主题由 Harmony技术专家于 2024-6-13 15:11 审核通过
2024-6-13 07:00:41　　评论淘帖0 邀请回答您可以邀请以下用户，快速回答问题 × wang21cj 该类别下有 38 个回答。邀请回答 hgimtk 该类别下有 38 个回答。邀请回答新星之火12138 该类别下有 33 个回答。邀请回答就好国dd 该类别下有 32 个回答。邀请回答 chm5 该类别下有 32 个回答。邀请回答 zyh34997 该类别下有 32 个回答。邀请回答 zaichenxi 该类别下有 31 个回答。邀请回答 heks 该类别下有 31 个回答。邀请回答 flowerddd 该类别下有 29 个回答。邀请回答 muwersddg 该类别下有 29 个回答。邀请回答四川赵赵该类别下有 29 个回答。邀请回答星星公交站该类别下有 28 个回答。邀请回答 vinww特烦恼该类别下有 28 个回答。邀请回答 caosurround 该类别下有 28 个回答。邀请回答安德森大该类别下有 27 个回答。邀请回答 xwgc888 该类别下有 27 个回答。邀请回答 h1654155143.8331 该类别下有 27 个回答。邀请回答 lkjflksjfsa 该类别下有 27 个回答。邀请回答 723662364d 该类别下有 27 个回答。邀请回答 overheat 该类别下有 27 个回答。邀请回答举报刘丽相关推荐 • ESP32S3刷写程序不进去怎么解决？ 301 • ESP32S3 wroom模组无法烧写大于4MB的文件怎么解决？ 284 • ESP32S3 wroom模组无法烧写大于4MB的文件怎么解决？ 228 • ESP32S3内部外设包括DMA之类的可以直接用ESP32的配置来启用吗？ 505 • esp32s3 fn8烧录不成功的原因？ 279 • esp32s3调用restart后连不上wifi的原因？ 421 • ESP32S3有没有方法完全关闭light-sleep？ 139 • 请问下esp32s3在连接wifi之后会自己断开，是怎么回事呢？ 270 • esp32 s3调用restart后连不上wifi怎么解决？ 267 • esp32S3无法烧写的原因是什么？ 474 1个回答

答案对人有帮助，有参考价值 0 要关闭ESP32-S3的WiFi日志打印，您可以尝试以下步骤： 1. 打开项目的 `sdkconfig` 文件。通常，这个文件位于项目的根目录下，名为 `sdkconfig` 或 `sdkconfig.defaults`。 2. 在 `sdkconfig` 文件中，找到与日志相关的配置项。这些配置项可能包括： - `CONFIG_LOG_DEFAULT_LEVEL` - `CONFIG_LOG_MAXIMUM_LEVEL` - `CONFIG_LOG_TIMESTAMP_SOURCE` - `CONFIG_LOG_COLOR` 3. 将 `CONFIG_LOG_DEFAULT_LEVEL` 和 `CONFIG_LOG_MAXIMUM_LEVEL` 的值设置为 `ESP_LOG_NONE`。这将关闭所有日志输出。 ``` CONFIG_LOG_DEFAULT_LEVEL=ESP_LOG_NONE CONFIG_LOG_MAXIMUM_LEVEL=ESP_LOG_NONE ``` 4. 如果您希望关闭特定组件的日志输出，可以找到该组件的日志级别配置项，将其值设置为 `ESP_LOG_NONE`。对于WiFi模块，您可以尝试以下配置项： ``` CONFIG_ESP_WIFI_LOG=ESP_LOG_NONE ``` 5. 保存 `sdkconfig` 文件并重新构建项目。 6. 烧录新的固件到您的ESP32-S3设备。请注意，关闭日志输出可能会影响调试过程。如果您需要重新启用日志输出，请将 `CONFIG_LOG_DEFAULT_LEVEL` 和 `CONFIG_LOG_MAXIMUM_LEVEL` 的值设置回原始值，例如 `ESP_LOG_INFO` 或 `ESP_LOG_DEBUG`。此外，如果您使用的是ESP-IDF v4.4版本，可能需要根据实际项目和配置进行一些调整。上述步骤应该适用于大多数情况，但请根据您的具体需求进行调整。

2024-6-13 16:24:10 评论举报青sky