S32K144批量擦除后无法访问设备怎么处理？

我有一个 S32K144 设备，其中程序分区命令 (PGMPART) 用于分配 keysize = 1 到 20 的 CSEc。
但是没有安装 MASTER_ECU_KEY。这意味着没有执行 CMD_LOAD_KEY。
之后使用 JLink 调试器和 Erase 命令发出批量擦除
现在调试器无法连接并显示以下内容：
剧透 (Highlight to read)SEGGER J-Link Commander V7.80d (Compiled Oct 4 2022 16:40:45)
DLL version V7.80d, compiled Oct 4 2022 16:40:22

Connecting to J-Link via USB...O.K.
Firmware: J-Link V10 compiled Sep 22 2022 14:59:36
Hardware version: V10.10
J-Link uptime (since boot): N/A (Not supported by this model)
S/N: 50124738
License(s): GDB
VTref=4.982V
Device \"S32K144 (ALLOW SECURITY)\" selected.


Connecting to target via SWD
InitTarget() start
Device will be unsecured now.
InitTarget() end
Found SW-DP with ID 0x2BA01477
DPIDR: 0x2BA01477
CoreSight SoC-400 or earlier
Scanning AP map to find all available APs
AP[2]: Stopped AP scan as end of AP map has been reached
AP[0]: AHB-AP (IDR: 0x24770011)
AP[1]: JTAG-AP (IDR: 0x001C0000)
Iterating through AP map to find AHB-AP to use
AP[0]: Skipped. Could not read CPUID register
AP[1]: Skipped. Not an AHB-AP
InitTarget() start
Device will be unsecured now.
Timeout while halting CPU.
InitTarget() end
Found SW-DP with ID 0x2BA01477
DPIDR: 0x2BA01477
CoreSight SoC-400 or earlier
Scanning AP map to find all available APs
AP[2]: Stopped AP scan as end of AP map has been reached
AP[0]: AHB-AP (IDR: 0x24770011)
AP[1]: JTAG-AP (IDR: 0x001C0000)
Iterating through AP map to find AHB-AP to use
AP[0]: Skipped. Could not read CPUID register
AP[1]: Skipped. Not an AHB-AP

****** Error: Could not find core in Coresight setup

InitTarget() start
Device will be unsecured now.
Timeout while halting CPU.
InitTarget() end
Found SW-DP with ID 0x2BA01477
DPIDR: 0x2BA01477
CoreSight SoC-400 or earlier
Scanning AP map to find all available APs
AP[2]: Stopped AP scan as end of AP map has been reached
AP[0]: AHB-AP (IDR: 0x24770011)
AP[1]: JTAG-AP (IDR: 0x001C0000)
Iterating through AP map to find AHB-AP to use
AP[0]: Skipped. Could not read CPUID register
AP[1]: Skipped. Not an AHB-AP
InitTarget() start
Device will be unsecured now.
Timeout while halting CPU.
InitTarget() end
Found SW-DP with ID 0x2BA01477
DPIDR: 0x2BA01477
CoreSight SoC-400 or earlier
Scanning AP map to find all available APs
AP[2]: Stopped AP scan as end of AP map has been reached
AP[0]: AHB-AP (IDR: 0x24770011)
AP[1]: JTAG-AP (IDR: 0x001C0000)
Iterating through AP map to find AHB-AP to use
AP[0]: Skipped. Could not read CPUID register
AP[1]: Skipped. Not an AHB-AP

****** Error: Could not find core in Coresight setup

Cannot connect to target.
SEGGER J-Link Commander V7.80d (Compiled Oct 4 2022 16:40:45)DLL version V7.80d, compiled Oct 4 2022 16:40:22Connecting to J-Link via USB...O.K.Firmware: J-Link V10 compiled Sep 22 2022 14:59:36Hardware version: V10.10J-Link uptime (since boot): N/A (Not supported by this model)S/N: 50124738License(s): GDBVTref=4.982VDevice \"S32K144 (ALLOW SECURITY)\" selected.Connecting to target via SWDInitTarget() startDevice will be unsecured now.InitTarget() endFound SW-DP with ID 0x2BA01477DPIDR: 0x2BA01477CoreSight SoC-400 or earlierScanning AP map to find all available APsAP[2]: Stopped AP scan as end of AP map has been reachedAP[0]: AHB-AP (IDR: 0x24770011)AP[1]: JTAG-AP (IDR: 0x001C0000)Iterating through AP map to find AHB-AP to useAP[0]: Skipped. Could not read CPUID registerAP[1]: Skipped. Not an AHB-APInitTarget() startDevice will be unsecured now.Timeout while halting CPU.InitTarget() endFound SW-DP with ID 0x2BA01477DPIDR: 0x2BA01477CoreSight SoC-400 or earlierScanning AP map to find all available APsAP[2]: Stopped AP scan as end of AP map has been reachedAP[0]: AHB-AP (IDR: 0x24770011)AP[1]: JTAG-AP (IDR: 0x001C0000)Iterating through AP map to find AHB-AP to useAP[0]: Skipped. Could not read CPUID registerAP[1]: Skipped. Not an AHB-AP****** Error: Could not find core in Coresight setupInitTarget() startDevice will be unsecured now.Timeout while halting CPU.InitTarget() endFound SW-DP with ID 0x2BA01477DPIDR: 0x2BA01477CoreSight SoC-400 or earlierScanning AP map to find all available APsAP[2]: Stopped AP scan as end of AP map has been reachedAP[0]: AHB-AP (IDR: 0x24770011)AP[1]: JTAG-AP (IDR: 0x001C0000)Iterating through AP map to find AHB-AP to useAP[0]: Skipped. Could not read CPUID registerAP[1]: Skipped. Not an AHB-APInitTarget() startDevice will be unsecured now.Timeout while halting CPU.InitTarget() endFound SW-DP with ID 0x2BA01477DPIDR: 0x2BA01477CoreSight SoC-400 or earlierScanning AP map to find all available APsAP[2]: Stopped AP scan as end of AP map has been reachedAP[0]: AHB-AP (IDR: 0x24770011)AP[1]: JTAG-AP (IDR: 0x001C0000)Iterating through AP map to find AHB-AP to useAP[0]: Skipped. Could not read CPUID registerAP[1]: Skipped. Not an AHB-AP****** Error: Could not find core in Coresight setupCannot connect to target.



是否可以恢复此设备？