[问答]

怎么实现基于Arduino的多功能数字时钟的设计？

1167

问答对人有帮助，内容完整，我也想知道答案 0 怎么实现基于Arduino的多功能数字时钟的设计？ 0
2021-11-2 06:16:47　　评论淘帖0 邀请回答您可以邀请以下用户，快速回答问题 × elecfans 该类别下有 7 个回答。邀请回答 heks 该类别下有 7 个回答。邀请回答冰箱洗衣机该类别下有 6 个回答。邀请回答 chm5 该类别下有 6 个回答。邀请回答 lifei639156 该类别下有 6 个回答。邀请回答 szj0213 该类别下有 6 个回答。邀请回答 60user103 该类别下有 6 个回答。邀请回答细水爱长流该类别下有 6 个回答。邀请回答 dsgfa 该类别下有 6 个回答。邀请回答深海零下一度1 该类别下有 6 个回答。邀请回答 mingodong 该类别下有 6 个回答。邀请回答 h1654155199.5148 该类别下有 6 个回答。邀请回答 ZQW发烧友该类别下有 6 个回答。邀请回答安立路该类别下有 6 个回答。邀请回答国名英雄XXX 该类别下有 6 个回答。邀请回答飞雪9366 该类别下有 6 个回答。邀请回答 kpj3026 该类别下有 5 个回答。邀请回答 tigerwang711 该类别下有 5 个回答。邀请回答北冥有熊该类别下有 5 个回答。邀请回答双11 该类别下有 5 个回答。邀请回答举报宜家相关推荐 • 怎么实现基于Multisim10.0.1的多功能数字钟的设计？ 3001 • 新人求助，求大神帮忙做一个多功能数字时钟的设计 3287 • 求助，基于FPGA的多功能时钟。 4497 • arduino做数字时钟需要使用几个按钮？ 988 • 多功能数采卡的数字I/O输出编程问题 2047 • 如何设计一个数字时钟？ 2084 • 如何实现基于STM32的多功能GSM通讯系统设计？ 1264 • 怎么实现多功能测试仪表的设计？ 824 • 基于单片机的多功能数字钟加温湿度传感器 3468 • 基于单片机的多功能数字温度计 3225 1个回答

答案对人有帮助，有参考价值 0 实现功能：显示时间、日期和星期断电保存时间通过按钮设置时间、日期整点响铃自定义闹钟显示温度自定义报警温度按键功能：按选择键进入设置时间功能；同时按 + - 键进入闹钟和报警温度设置功能；再按选择键光标跳动，光标跳到哪当前的参数即可通过加减键修改。实验所需器件： Arduino开发板或Atmega328P芯片、DS1302时钟芯片、温度传感器DS18b20、蜂鸣器、不带锁开关、LCD1602、10K可调电阻、10K电阻（可不接，即DS18b20端口的电阻可去掉，不影响读数） Proteus ISIS 仿真图：依赖库下载: DS1302 OneWire DallasTemperature 依赖库的安装方法，如不清楚，可以参考官方文档《安装其他的Arduino库》实物图：程序如下： /* * * LCD RS pin to digital pin 12 * LCD Enable pin to digital pin 11 * LCD D4 pin to digital pin 5 * LCD D5 pin to digital pin 4 * LCD D6 pin to digital pin 3 * LCD D7 pin to digital pin 2 * LCD R/W pin to ground * LCD VSS pin to ground * LCD VCC pin to 5V * / #include #include //LCD1602显示头文件 #include #include //温度传感器DS18B20头文件 #define ONE_WIRE_BUS A3 //DS18B20 信号端口 OneWire oneWire(ONE_WIRE_BUS); DallasTemperature sensors(&oneWire); LiquidCrystal lcd(12, 11, 5, 4, 3, 2); #define choose A0 //选择端口 #define add A1 //加 #define minus A2 //减 #define Tone 13 //蜂鸣器端口 uint8_t CE_PIN = 8; //DS1302 RST端口 uint8_t IO_PIN = 9; //DS1302 DAT端口 uint8_t SCLK_PIN = 10; //DS1302 CLK端口 DS1302 rtc(CE_PIN, IO_PIN, SCLK_PIN); //创建 DS1302 对象 unsigned long seconds; int s = 0, m = 0, h = 0, d = 0, mon = 0, y = 0; //时间进位 int second = 0, minute = 0, hour = 0, day = 0, month = 0, year = 0; //当前时间 int SECOND = 0, MINUTE = 0, HOUR = 0, DAY = 0, MONTH = 0, YEAR = 0; //初始时间 int chose = 0, alarm_choose = 0 ,ButtonDelay = 10, frequence = 2093; int alarm_hour = 7, alarm_minute = 30, alarm_second = 0; //闹钟时间 double Temperatures, Temp_Alarm = 30 ; void setup(){ for(int i = 2;i <= 13; i++){ pinMode(i,OUTPUT); } digitalWrite(add, HIGH); digitalWrite(minus, HIGH); digitalWrite(choose, HIGH); lcd.begin(16, 2); //初始化LCD1602 sensors.begin(); //初始化温度传感器DS18B20 //Time t(2015, 5, 16, 0, 2, 20, 1); //rtc.time(t); //设置DS1302芯片初始时间 //由于当初遗留的一些问题，本方案有些不完美。我这里使用的方案是通电读取DS1302芯片的时间，然后再根据运行时间让时间走动。 //如果对时间精确性比较敏感，可以改成始终从DS1302芯片读取时间。 set(rtc.year(), rtc.month(), rtc.date(), rtc.hour(), rtc.minutes(), rtc.seconds()); rtc.write_protect(false); // 关闭DS1302芯片写保护 rtc.halt(false); //为true时DS1302暂停 } /* 格式化输出 / void FormatDisplay(int col, int row,int num){ lcd.setCursor(col, row); if(num < 10) lcd.print("0"); lcd.print(num); } /* 计算时间 / void time() { second = (SECOND + seconds) % 60; //计算秒 m = (SECOND + seconds) / 60; //分钟进位 FormatDisplay(6,1,second); minute = (MINUTE + m) % 60; //计算分钟 h = (MINUTE + m) / 60; //小时进位 FormatDisplay(3,1,minute); hour = (HOUR + h) % 24; //计算小时 d = (HOUR + h) / 24; //天数进位 FormatDisplay(0,1,hour); lcd.setCursor(2, 1); lcd.print(":"); lcd.setCursor(5, 1); lcd.print(":"); } /* 根据年月计算当月天数 / int Days(int year, int month){ int days = 0; if (month != 2){ switch(month){ case 1: case 3: case 5: case 7: case 8: case 10: case 12: days = 31; break; case 4: case 6: case 9: case 11: days = 30; break; } }else{ //闰年 if(year % 4 == 0 && year % 100 != 0 \|\| year % 400 == 0){ days = 29; } else{ days = 28; } } return days; } /* 计算当月天数 / void Day(){ int days = Days(year,month); int days_up; if(month == 1){ days_up = Days(year - 1, 12); } else{ days_up = Days(year, month - 1); } day = (DAY + d) % days; if(day == 0){ day = days; } if((DAY + d) == days + 1 ){ DAY -= days; mon++; } if((DAY + d) == 0){ DAY += days_up; mon--; } FormatDisplay(8,0,day); } /* 计算月份 / void Month(){ month = (MONTH + mon) % 12; if(month == 0){ month = 12; } y = (MONTH + mon - 1) / 12; FormatDisplay(5,0,month); lcd.setCursor(7, 0); lcd.print('-'); } /* 计算年份 / void Year(){ year = ( YEAR + y ) % 9999; if(year == 0){ year = 9999; } lcd.setCursor(0, 0); if(year < 1000){ lcd.print("0"); } if(year < 100){ lcd.print("0"); } if(year < 10){ lcd.print("0"); } lcd.print(year); lcd.setCursor(4, 0); lcd.print('-'); } /* 根据年月日计算星期几 / void Week(int y,int m, int d){ if(m == 1){ m = 13; } if(m == 2){ m = 14; } int week = (d+2m+3(m+1)/5+y+y/4-y/100+y/400)%7+1; String weekstr = ""; switch(week){ case 1: weekstr = "Mon. "; break; case 2: weekstr = "Tues. "; break; case 3: weekstr = "Wed. "; break; case 4: weekstr = "Thur. "; break; case 5: weekstr = "Fri. "; break; case 6: weekstr = "Sat. "; break; case 7: weekstr = "Sun. "; break; } lcd.setCursor(11, 0); lcd.print(weekstr); } /* 显示时间、日期、星期 / void Display() { time(); Day(); Month(); Year(); Week(year,month,day); } /* 显示光标 / void DisplayCursor(int rol, int row) { lcd.setCursor(rol, row); lcd.cursor(); delay(100); lcd.noCursor(); delay(100); } /* 设置初始时间 / void set(int y, int mon, int d, int h, int m, int s){ YEAR = y; MONTH = mon; DAY = d; HOUR = h; MINUTE = m; SECOND = s; } /* 通过按键设置时间 / void Set_Time(int rol, int row, int &Time){ DisplayCursor(rol, row); if(digitalRead(add) == LOW){ delay(ButtonDelay); if(digitalRead(add) == LOW){ Time ++; } Display(); } if(digitalRead(minus) == LOW){ delay(ButtonDelay); if(digitalRead(minus) == LOW){ Time --; } Display(); } } /* 按键选择 / void Set_Clock(){ if(digitalRead(choose)==LOW){ lcd.setCursor(9, 1); lcd.print("SetTime"); while(1){ if(digitalRead(choose) == LOW){ delay(ButtonDelay); if(digitalRead(choose) ==LOW){ chose++; } } seconds = millis()/1000; Display(); if(chose == 1){ Set_Time(1, 1, HOUR); //SetHour }else if(chose == 2){ Set_Time(4, 1, MINUTE); //SetMinute }else if(chose == 3){ Set_Time(7, 1, SECOND); //SetSecond }else if(chose == 4){ Set_Time(9, 0, DAY); //SetDay }else if(chose == 5){ Set_Time(6, 0, MONTH); // SetMonth }else if(chose == 6){ Set_Time(3, 0, YEAR); //SetYear }else if(chose >= 7) { chose = 0; break; } } } } /* 设置闹钟小时 / void Set_Alarm_Hour(){ DisplayCursor(1, 1); if(digitalRead(add) == LOW){ delay(ButtonDelay); if(digitalRead(add) == LOW){ alarm_hour ++; if(alarm_hour == 24){ alarm_hour = 0; } FormatDisplay(0,1,alarm_hour); } } if(digitalRead(minus) == LOW){ delay(ButtonDelay); if(digitalRead(minus) == LOW){ alarm_hour --; if(alarm_hour == -1){ alarm_hour = 23; } FormatDisplay(0,1,alarm_hour); } } } /* 设置闹钟分钟 / void Set_Alarm_Minute(){ DisplayCursor(4, 1); if(digitalRead(add) == LOW) { delay(ButtonDelay); if(digitalRead(add) == LOW){ alarm_minute ++; if(alarm_minute == 60){ alarm_minute = 0; } FormatDisplay(3,1,alarm_minute); } } if(digitalRead(minus) == LOW){ delay(ButtonDelay); if(digitalRead(minus) == LOW){ alarm_minute --; if(alarm_minute == -1){ alarm_minute = 59; } FormatDisplay(3,1,alarm_minute); } } } /* 设置报警温度 / void Set_Alarm_Temp(){ DisplayCursor(10, 1); if(digitalRead(add) == LOW) { delay(ButtonDelay); if(digitalRead(add) == LOW){ Temp_Alarm ++; } } if(digitalRead(minus) == LOW){ delay(ButtonDelay); if(digitalRead(minus) == LOW){ Temp_Alarm --; } } } /* 进入报警设置 / void Set_Alarm(){ if(digitalRead(add) == LOW && digitalRead(minus) == LOW){ alarm_hour = hour; alarm_minute = minute; //alarm_choose = 1; lcd.setCursor(0, 0); lcd.print("set alarm "); lcd.setCursor(6, 1); lcd.print("00"); //闹钟秒数 while(1){ if(digitalRead(choose) == LOW){ delay(ButtonDelay); if(digitalRead(choose) == LOW){ alarm_choose++; } } lcd.setCursor(9, 1); lcd.print(Temp_Alarm); lcd.setCursor(14, 1); lcd.print((char)223); //显示o符号 lcd.setCursor(15, 1); lcd.print("C"); //显示字母C if(alarm_choose == 1){ Set_Alarm_Hour(); }else if(alarm_choose == 2){ Set_Alarm_Minute(); }else if(alarm_choose == 3){ Set_Alarm_Temp(); }else if(alarm_choose >= 4){ alarm_choose = 0; break; } } } } /* 正点蜂鸣 / void Point_Time_Alarm(){ if(minute == 0 && second == 0){ tone(Tone,frequence); delay(500); noTone(Tone); } } /* 闹钟指定时间蜂鸣 / void Clock_Alarm(){ if(hour == alarm_hour && minute == alarm_minute && second == alarm_second){ tone(Tone,frequence); delay(5000); noTone(Tone); } } /* 获取DS18B20温度 / void GetTemperatures(){ sensors.requestTemperatures(); // Send the command to get temperatures Temperatures = sensors.getTempCByIndex(0); lcd.setCursor(9, 1) ; lcd.print(Temperatures); //获取温度 lcd.setCursor(14, 1); lcd.print((char)223); //显示o符号 lcd.setCursor(15, 1); lcd.print("C"); //显示字母C } /* 超过指定温度报警 */ void Temperatures_Alarm(){ if(Temperatures >= Temp_Alarm){ tone(Tone,frequence); delay(500); noTone(Tone); } } void loop() { seconds = millis()/1000; //获取单片机当前运行时间 Display(); //显示时间 Set_Clock(); //设置时间 Set_Alarm(); //设置闹钟 Point_Time_Alarm(); //正点蜂鸣 Clock_Alarm(); //闹钟时间蜂鸣 GetTemperatures(); //获取DS18B20温度 Temperatures_Alarm(); //超过指定温度报警 Time t(year, month, day, hour, minute, second, 1); //断电将单片机的当前时间写到DS1302芯片中 rtc.time(t); }

2021-11-2 11:54:53 评论举报李熙国