能推荐适用于VEE的PC RS485卡吗？

RE：[vrf] Thermotron烤箱......我有，但我们从PC控制烤箱。
（不是通过运行烤箱程序）因此我从来没有设置间隔只有临时和RH和斜坡。我唯一可以建议的是建立一个实验，你加载hi值，lo值并拆分差异，直到你得到一些东西
明智的.BrChuck Stewart高级软件工程师Telt Ltd电话+44 1252 611101Beacon Hill Road Mobile +44 7796 276949Church Crookham Facsimile +44 1252 611301Hampshire GU52 8DY charles.stewart@vertu.com> -----原帖----->
来自：ext Bauer，Brian [mailto：brian.bauer@rfsworld.com]>发送日期：2006年5月3日15:17>收件人：VRF>主题：[vrf] Thermotron烤箱...... >>这有点偏离主题，不过
，有没有人>与Thermotron 2800编程器/控制器接口。
我>试图找出你>可以指定的最大间隔数。
他们的用户指南似乎没有提及它>他们的技术支持是不存在的。
请帮助.... >> Brian Bauer>测试工程师>>> --->您目前订阅了vrf：> Charles.Stewart@vertu.com要订阅，请发送电子邮件至：“vrf-request @
lists.it.agilent.com“在邮件正文中使用”subscribe“一词。>要取消订阅，请发送一封空白电子邮件至>”leave-vrf@it.lists.it.agilent.com“。>向此邮件发送邮件
列表，发送电子邮件至“vrf@agilent.com”。
>如果您需要有关邮件列表的帮助，请发送邮件至>“owner-vrf@it.lists.it.agilent.com”。>在“www.oswegosw.com/vrf_archive/”上搜索“非官方vrf档案”。
> ---您目前订阅了vrf：r***@soco.agilent.com要订阅，请发送电子邮件至：“vrf-request@lists.it.agilent.com”，邮件正文中包含subscribe一词。取消订阅
发送一封空白电子邮件至“leave-vrf@it.lists.it.agilent.com”。要发送邮件到此邮件列表，请发送电子邮件至“vrf@agilent.com”。
如果您需要有关邮件列表的帮助，请发送邮件至“owner-vrf@it.lists.it.agilent.com”。在“www.oswegosw.com/vrf_archive/”上搜索“非官方vrf档案”。



     以下为原文

  RE: [vrf] Thermotron Oven...I have, but we control our oven from the PC. (not by running an oven program) Hence I have never set an interval only temp and RH and ramp.The only thing I can suggest is set up an experiment in which you load hi values, lo values and split the difference till you get something sensible..BrChuck Stewart                            Senior Software EngineerVertu Ltd                                       Telephone       +44 1252 611101Beacon Hill Road                Mobile                  +44 7796 276949Church Crookham                         Facsimile       +44 1252 611301Hampshire GU52 8DY              charles.stewart@vertu.com>-----Original Message----->From: ext Bauer, Brian [mailto:brian.bauer@rfsworld.com]>Sent: 03 May 2006 15:17>To: VRF>Subject: [vrf] Thermotron Oven...>>This is somewhat off topic, however, has anyone ever>interfaced with a Thermotron 2800 programmer/controller. I am>trying to find out what the maximum number of intervals you>can specify are. Their user guide doens't seem to mention it>and their technical support is non-existent. Please help....>>Brian Bauer>Test Engineer>>>--->You are currently subscribed to vrf as:>Charles.Stewart@vertu.com To subscribe please send an email>to: "vrf-request@lists.it.agilent.com" with the word subscribe>in the message body.>To unsubscribe send a blank email to>"leave-vrf@it.lists.it.agilent.com".>To send messages to this mailing list,  email "vrf@agilent.com". >If you need help with the mailing list send a message to>"owner-vrf@it.lists.it.agilent.com".>Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".> ---You are currently subscribed to vrf as: [email=r***@soco.agilent.com]r***@soco.agilent.com[/email]To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".To send messages to this mailing list,  email "vrf@agilent.com".  If you need help with the mailing list send a message to"owner-vrf@it.lists.it.agilent.com".Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

RE：[vrf] Thermotron烤箱......我有，但我们从PC控制烤箱。
（不是通过运行烤箱程序）因此我从来没有设置间隔只有临时和RH和斜坡。我唯一可以建议的是建立一个实验，你加载hi值，lo值并拆分差异，直到你得到一些东西
明智的.BrChuck Stewart高级软件工程师Telt Ltd电话+44 1252 611101Beacon Hill Road Mobile +44 7796 276949Church Crookham Facsimile +44 1252 611301Hampshire GU52 8DY charles.stewart@vertu.com> -----原帖----->
来自：ext Bauer，Brian [mailto：brian.bauer@rfsworld.com]>发送日期：2006年5月3日15:17>收件人：VRF>主题：[vrf] Thermotron烤箱...... >>这有点偏离主题，不过
，有没有人>与Thermotron 2800编程器/控制器接口。
我>试图找出你>可以指定的最大间隔数。
他们的用户指南似乎没有提及它>他们的技术支持是不存在的。
请帮助.... >> Brian Bauer>测试工程师>>> --->您目前订阅了vrf：> Charles.Stewart@vertu.com要订阅，请发送电子邮件至：“vrf-request @
lists.it.agilent.com“在邮件正文中使用”subscribe“一词。>要取消订阅，请发送一封空白电子邮件至>”leave-vrf@it.lists.it.agilent.com“。>向此邮件发送邮件
列表，发送电子邮件至“vrf@agilent.com”。
>如果您需要有关邮件列表的帮助，请发送邮件至>“owner-vrf@it.lists.it.agilent.com”。>在“www.oswegosw.com/vrf_archive/”上搜索“非官方vrf档案”。
> ---您目前订阅了vrf：r***@soco.agilent.com要订阅，请发送电子邮件至：“vrf-request@lists.it.agilent.com”，邮件正文中包含subscribe一词。取消订阅
发送一封空白电子邮件至“leave-vrf@it.lists.it.agilent.com”。要发送邮件到此邮件列表，请发送电子邮件至“vrf@agilent.com”。
如果您需要有关邮件列表的帮助，请发送邮件至“owner-vrf@it.lists.it.agilent.com”。在“www.oswegosw.com/vrf_archive/”上搜索“非官方vrf档案”。



     以下为原文

  RE: [vrf] Thermotron Oven...I have, but we control our oven from the PC. (not by running an oven program) Hence I have never set an interval only temp and RH and ramp.The only thing I can suggest is set up an experiment in which you load hi values, lo values and split the difference till you get something sensible..BrChuck Stewart                            Senior Software EngineerVertu Ltd                                       Telephone       +44 1252 611101Beacon Hill Road                Mobile                  +44 7796 276949Church Crookham                         Facsimile       +44 1252 611301Hampshire GU52 8DY              charles.stewart@vertu.com>-----Original Message----->From: ext Bauer, Brian [mailto:brian.bauer@rfsworld.com]>Sent: 03 May 2006 15:17>To: VRF>Subject: [vrf] Thermotron Oven...>>This is somewhat off topic, however, has anyone ever>interfaced with a Thermotron 2800 programmer/controller. I am>trying to find out what the maximum number of intervals you>can specify are. Their user guide doens't seem to mention it>and their technical support is non-existent. Please help....>>Brian Bauer>Test Engineer>>>--->You are currently subscribed to vrf as:>Charles.Stewart@vertu.com To subscribe please send an email>to: "vrf-request@lists.it.agilent.com" with the word subscribe>in the message body.>To unsubscribe send a blank email to>"leave-vrf@it.lists.it.agilent.com".>To send messages to this mailing list,  email "vrf@agilent.com". >If you need help with the mailing list send a message to>"owner-vrf@it.lists.it.agilent.com".>Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".> ---You are currently subscribed to vrf as: [email=r***@soco.agilent.com]r***@soco.agilent.com[/email]To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".To send messages to this mailing list,  email "vrf@agilent.com".  If you need help with the mailing list send a message to"owner-vrf@it.lists.it.agilent.com".Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

亲爱的Vrf，我需要通过RS485（Modbus）接口控制电动机驱动器。我想接收数据并从VEE内发送命令。你能推荐一款适用于VEE的PC RS485卡吗？
在此先感谢您的help.Omer AkbasArcelik A.S.Istanbul，Turkey_____________________________________________________________________________________________________________________________________________Bu电子posta请mesaji kisiye本页Özelolup，gizli信息客人iceriyor olabilir。
Eger bu e-posta mesaji size yanlislikla ulasmissa，icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz。
Bu durumda lutfen e-posta mesajini kullaniciya hemen gerigonderinizÂveÂtumkopyalarini mesaj kutunuzdan siliniz。
Bu e-posta mesaji，hic bir sekilde，herhangi bir amac icin cogaltilamaz，yayinlanamaz ve para karsiligi satilamaz.Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir。
Ancak yollayici，BU E-posta请mesajinin - 病毒koruma SISTEMLERI ILE KONTROL ediliyor OLSA胆 - 病毒icermedigini保修和etmez已经meydana gelebilecek zararlardan dogacak hicbir sorumlulugu喀布尔etmez。
此消息仅供与其所针对的个人或实体一起使用，并且可能包含机密信息。
如果您不是此邮件的预定收件人或您错误地收到此邮件，则应避免使用任何内容并打开任何附件。
在这种情况下，请立即通知发件人并将邮件返回给发件人，然后删除并销毁所有副本。
此电子邮件无法以任何理由复制，发布或出售。
这种电子邮件已被反病毒系统扫描，因为存在计算机病毒。
但是，在这样做时，发件人不能保证病毒或其他形式的数据损坏可能不存在，并且在任何情况下都不承担任何责任._____________________________________________________________________________________________________________________________________________---要订阅，请发送电子邮件至：“vrf-request @ lists
.it.agilent.com“在邮件正文中使用了subscribe这个词。
要取消订阅，请发送一封空白电子邮件至“leave-vrf@it.lists.it.agilent.com”。
要将邮件发送到此邮件列表，请发送电子邮件至“vrf@agilent.com”。
如果您需要有关邮件列表的帮助，请发送邮件至“owner-vrf@it.lists.it.agilent.com”。
在“www.oswegosw.com/vrf_archive/”上搜索“unofficial vrf archive”。



     以下为原文

  Dear Vrf,
I need to control an electric motor drive via an RS485(Modbus) interface.  I would like to receive data and send commands from within VEE.  Can you recommend a PC RS485 card that works with VEE? Thanks in advance for your help.
Omer Akbas
Arcelik A.S.
Istanbul, Turkey
_____________________________________________________________________________________________________________________________________________
Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa,  icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz  ve  tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz.  Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez.
This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential  information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however,  sender  cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence.
_____________________________________________________________________________________________________________________________________________

---

To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".