请问是否可以在PIC中使用堆栈TCP/IP来使用EnC624J600 + WiFi MF24WG0MA？

大声笑：



      以下为原文

   
Thanks for the tip LoL:

One more sewed on TCP / IP, say the following:

Altered the SaveAppConfig () function in MainDemo.c to store a more robust
    signature to EEPROM / SPI Flash when saving the AppConfig structure. in v5.25
    and prior versions stack When EEPROM or SPI Flash memory was available, the
    stack would automatically write to one byte character marker to address
    0x000000 in the EEPROM / Flash Indicating if a valid AppConfig structure was
    stored in the non-volatile memory. This resulted in the EEPROM / Flash
    contents being organized like The Following:
        Address Data Contents
        =================== =============================== ===============
        0x000000: Marker Byte
        0x000001: AppConfig structure
        MPFS_RESERVE_BLOCK: Start of MPFS / MPFS2 image containing web pages
    In this version stack, EEPOM / Flash contents will now contain:
        Address Data Contents
        =================== =============================== ===============
        0x000000: Length of AppConfig structure (16-bit integer)
        0x000002: IP checksum of the AppConfig default values, the
                                defined in TCPIPConfig.h and WF_Config.h
                                (16-bit integer).
        0x000004: IP checksum of the subsequent EEPROM / Flash
                                bytes of the AppConfig values.
        0x000006: AppConfig structure
        MPFS_RESERVE_BLOCK: Start of MPFS / MPFS2 image containing web pages
 it is possible aterar this address ???example: 0x00004 to 0x00404