可以将TDR选项010从一个8753A移动到另一个8753A吗？

好吧，我必须这是一个奇怪的问题，但无论如何我都会尝试！
我的一个好朋友有一个很好的条件8753A。
我也有一个8753A，但由于一些白痴的完全无能，他们把它打包成跨大西洋航运这样的：http：//boxen.math.washington.edu/home/kirkby/damaged-VNA-by-inadequate-packaging
/badly-shipped-8753A-and-85046A.jpg我的8753A状况很差。
我有一个优势，他有一个优势 - 我的TDR选项010，他没有。
我不需要TDR选项，因为我在另一个VNA上使用它，而他可以使用它。
是否有可能从其中一个VNA中拉出芯片并将其粘在另一个上？
如果是这样，什么芯片？
我猜这是存储在像EEPROM这样的东西。
显然，如果芯片有校准信息或其他必须*保持特定于仪器的东西，那么这样做是不明智的。
如果它改变了我的VNA的S / N，我不会感到困扰，我怀疑它会打扰他。
戴夫



     以下为原文

  OK, I have to admid this is an odd question, but I'll try anyway!  

A good friend of mine has a nice condition 8753A.

I also have an 8753A, but due to the total incompetance of some idiot who poorly packaged it for transatlantic shipping like this:

http://boxen.math.washington.edu/home/kirkby/damaged-VNA-by-inadequate-packaging/badly-shipped-8753A-and-85046A.jpg

my 8753A is in poor condition.  

Mine has one advantage over his though - mine has the TDR option 010, his does not. I don't need the TDR option as I have it on another VNA, whereas he could make use of it.  

Is it possible to pull a chip from one of these VNAs and stick it in the other? If so, what chip? I'm guessing this is stored in something like EEPROM. Obviously if the chip has calibration information or other things that *must* remain specific to the instrument, then it woud not be sensible to do it.  

I'm not bothered if it changes the S/N of my VNA and I doubt it would bother him either.  

Dave