重构不起作用

如果我点击“预览”，它会说“没有找到模式”。显然，它没有看到弹出窗口中的文本。



      以下为原文

    If I click on "preview" it says "No patterns found".  Apparently, it doesn't see the text in the popup window.

重命名和预览用X 3.50进行了验证。在“键入新名称和弹出窗口消失”之间采取了什么GUI操作？屏幕截图或关于编译器和变量类型/范围的细节可能有所帮助。



      以下为原文

    Rename and Preview verified with X 3.50.
What GUI action was taken between:
"type in the new name and the popup disappears "
Maybe a screen shot or details about compiler and variable type/scope could help.
 

安纳波利斯——谢谢你的回答。这个问题已经消失了——就像它出现时一样神秘。我已经将它作为MPLABX的另一个特殊行为记录下来。我已经成功地重命名了我想要命名的变量/过程。一旦决定这样做，它就工作得很好。我确信在不透明的文件中有个地方有一个脚注。与其让它不工作也不知道为什么，不如让它工作而不知道为什么。我通常升级到最新版本，但（当前）3.51版本似乎正在给人们带来类似的神秘问题。我有3.4英镑够了。有一天我有时间去玩玩。再次感谢。这个论坛是我寻求帮助的来源。我想买一张去Microchip的机票必须经过一次到Mars的往返行程。



      以下为原文

    Annapolis--thanks for the anwer.
 
The problem has gone away--as mysteriously as it appeared.  I have logged it as yet another peculiar behavior of MPLABX.
 
I have successfully renamed the variables/procedures I wanted to name.  Worked fine once it decided to do so.  I am sure somewhere in the opaque documentation there is a footnote somewhere.  Better to have it working and not know why than have it not working and not know why.
 
I usually upgrade to the latest, but the (current) 3.51 release seems to be causing people similar mysterious problems.  I have enough with 3.4.  Someday when I have time to fiddle.
 
Thanks again.  This forum is my go to source for help.  Submitting a ticket to Microchip has to go through a round trip to Mars, I think.
 
Solved (sort of)