无法获得简单的Harmony项目编译：未声明的宏

我已经下载了最新的XC32编译器（1.43）和所有更新。我有最新版本的和声（1.10）。我有最新版本的MPLABX（3.61）。我创建了一个新的和声项目。我允许它将项目文件夹存储在“和谐”路径下的“应用程序”中的默认基本文件夹中。我运行配置器，告诉Orthon只配置时钟，并生成代码。编译器试图抱怨，在文件PosisSp32中，PysStMZ0512EFE064。h是未声明的：*CNCONXYXIDLY Y，其中x= a，b，c，d，e，f，g，h，j，y＝掩码，位置，或长度。（注：我试图包括我的编译器输出，但我的帖子一直不合格）。ENT和谐路径/XC32路径/项目路径组合。我试着去建造一个充实的项目。我试图弄清楚为什么我的电脑软件发现这些宏有问题（而同事电脑没有问题）。以前有人见过吗？看来我的电脑配置有问题，但我不知道它是什么（我和我的同事比较了路径变量，没有什么与众不同的）。



      以下为原文

    I have downloaded the latest XC32 compiler (1.43) and all updates. I have the latest release of HARMony (1.10). I have the latest release of MPLABX (3.61).


I create a new Harmony project. I allow it to store the project folder in the default base folder in "apps" under the Harmony path.


I run the configurator, tell Harmony to configure only the clock, and generate code. Then I attempt to compile.


The compiler complains that in the file ports_p32mz0512efe064.h the following are undeclared:

_CNCONx_SIDL_y, where x = A, B, C, D, E, F, G, H, or J, and y = MASK, POSItiON, or LENGTH.

(Note: I tried to include my compiler output, but my posts kept failing).

I've tried different harmony path/xc32 path/project path combinations. I've tried to get a fleshed-out project to build. I've tried to figure out why my computer's software is having problems finding these macros (whereas a co-workers computer does not have an issue).

Has anyone seen this before? It would seem that there is something wrong with my computer's configuration, but I don't know what it is (my co-worker and I compared PATH variables, and nothing stuck out as unusual).