测试H2.04发现不能用MHC配置任何项目

我正在测试H2.04，我发现我不能用MHC配置任何项目，并让它工作。我为构建和运行的PIC32 MZYEFST建立了MSDXBASIC演示。然后从头开始一个新项目，看看是否能使它工作。新项目PIC32 MZ2048 EFH144，BSP PIC32 MZYEFSTST.TH。是我打开的：1。时钟/ IO是由BSP 2设置的。USB接通，中断，函数MSD，LUN 0＝NVM3。这将开启系统TMR，设备NVM。4。生成代码。这也将产生一个32 K的DISK图像。5。将USB汉德尔添加到App.h AppDATA结构。6。将USB事件处理程序添加到App.C（从MSDYBasic项目的App.c复制）7。更新App.c以预置USB手柄，并打开USB设备。（从MSDYBASIC项目的App.c复制）8。将LED重新映射为需要。构建和程序。构建良好，但在Windows 7系统上从不安装。这应该是一个简单的配置，但如何使它工作？？？？那么，在工作之后，如何添加FS呢？？？？？



      以下为原文

    I am testing H2.04 and am finding that I can't get any project to be configured with MHC and have it work.
I took the msd_basic demo for the PIC32MZ_EF_ST which builds and runs.
Then I start a new project from scratch to see if I can get it to work.
New Project, PIC32MZ2048EFH144, BSP PIC32MZ_EF_ST.
This is what I turn on:
1.  Clock / IO is setup by the BSP.
2.  USB on, Interrupt, Function MSD, LUN 0 = NVM
3.  This will turn on System TMR, Device NVM.
4.  Generate code.  This will also generate a diskimage of 32K as well.
5.  Add USB Handel to app.h appData structure.
6.  Add USB event handler to app.c (copy from app.c of msd_basic project)
7.  update app.c to preset the USB handle, and to open the u*** device.
     (copy from app.c of msd_basic project)
8.  Remap the LED's as required.
build and program.
Builds just fine but never mounts on the window 7 system.

This should be a simple configuration, but how to I get it to work???
Then how do I add FS after it is working????